View source for Talk:Neo 1973 and Windows

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Return to Talk:Neo 1973 and Windows.

Retrieved from "http://wiki.openmoko.org/wiki/Talk:Neo_1973_and_Windows"
Personal tools

Pretty important this

I think this is probably worth developing a bit further. There are people out there who really go for the open source ideal but for one reason or another are tied to Windows in certain circumstances (work and so on). If we really want this to take off, we need to remember that Windows really is out there and people (unfortunately!) do use it. There must be a way of syncing this with windows. If I was better at developing I would put my hand up for this, but unfortunately, I'm not.

--Awrowe 20:21, 9 July 2007 (CEST)

Trying this I get "This device cannot start. (Code 10)"

Neo is recognized by Windows, I get asked for a driver, I point to linux.inf and some installation is happening. Then at the end I get the error message "This device cannot start. (Code 10)"

Unplugging and Plugging-In of the Neo is recognized fine by XP, but the same error occurs.

To reiterate the install procedure, one need to open device manager: 

c:\>set devmgr_show_nonpresent_devices=1
c:\>start devmgmt.msc

and then delete the Neo entries under network adapters.