Users Repositories

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Jalimo: + command line)
Line 30: Line 30:
 
OpenMoko provides most of Jalimo's packages through their own repository, but some packages have not been merged yet and are available through Jalimo's repositories. Run the following two commands to add them:
 
OpenMoko provides most of Jalimo's packages through their own repository, but some packages have not been merged yet and are available through Jalimo's repositories. Run the following two commands to add them:
  
echo "src/gz jalimo http://jalimo.evolvis.org/repository/openmoko/all" > /etc/opkg/jalimo-feed-all.conf
+
echo "src/gz jalimo http://jalimo.evolvis.org/repository/openmoko/all" > /etc/opkg/jalimo-feed-all.conf
echo "src/gz jalimo-armv4t http://jalimo.evolvis.org/repository/openmoko/armv4t" > /etc/opkg/jalimo-feed-armv4t.conf
+
echo "src/gz jalimo-armv4t http://jalimo.evolvis.org/repository/openmoko/armv4t" > /etc/opkg/jalimo-feed-armv4t.conf
  
'''unsatisfied libgcc-s1 dependency''': Currently you will get an error when installing OpenMoko packages from our repository since Jalimo is using OpenEmbedded's .dev branch to built the packages but OpenMoko is not. A workaround is to add ''-force-depends'' to the ''opkg'' command until we figured this out.
+
'''unsatisfied libgcc-s1 dependency''': Currently you will get an error when installing OpenMoko packages from our repository since Jalimo is using OpenEmbedded's .dev branch to built the packages but OpenMoko is not. A workaround is to add ''-force-depends'' to the ''opkg'' command until we figured this out: ''opkg install -force-depends classpath''
  
 
===[[User:ChooseOpen|ChooseOpen]]===
 
===[[User:ChooseOpen|ChooseOpen]]===

Revision as of 10:28, 27 October 2008

For information about the official downloads and distributions, see Downloads. A Community Repository hosted by Openmoko Inc. was setup in August 2008.

WARNING: Never add feeds which are not for your installed distribution. Mixing feeds will break your system.


Contents

Angstrom Repository

Angstrom is the base distribution of Openmoko Linux distribution. It contains the basic set of Linux applications and they should be compatible with Openmoko. The repository package listing.

To add the unstable Angstrom feed, update your /etc/opkg/base-feeds.conf to include a line:

src/gz base http://www.angstrom-distribution.org/feeds/2007/ipk/glibc/armv4t/base

On Om 2008.8, run the following commands from the Neo:

 echo "arch base 50" > /etc/opkg/angstrom-feed.conf
 echo "src/gz base http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv4t/base" >> /etc/opkg/angstrom-feed.conf

This repository contains the following useful packages:

  • Pidgin - Instant Messaging. Can connect to MSN, Google Talk, Yahoo, ICQ with additional plugins
  • Minimo - Web Browsing. AJAX capable, based on the Gecko rendering engine
  • Navit - Car Navigation with Routing Engine

Jalimo

Jalimo is a project to maintain a full featured free Java-like stack for mobile Linux-based devices. The aim is to pack and tailor existing JVM-related projects, as well as to develop APIs and tools for easy integration and development for the target platforms.

OpenMoko provides most of Jalimo's packages through their own repository, but some packages have not been merged yet and are available through Jalimo's repositories. Run the following two commands to add them:

echo "src/gz jalimo http://jalimo.evolvis.org/repository/openmoko/all" > /etc/opkg/jalimo-feed-all.conf echo "src/gz jalimo-armv4t http://jalimo.evolvis.org/repository/openmoko/armv4t" > /etc/opkg/jalimo-feed-armv4t.conf

unsatisfied libgcc-s1 dependency: Currently you will get an error when installing OpenMoko packages from our repository since Jalimo is using OpenEmbedded's .dev branch to built the packages but OpenMoko is not. A workaround is to add -force-depends to the opkg command until we figured this out: opkg install -force-depends classpath

ChooseOpen

http://chooseopen.com/openmoko/build/2007.2/?M=D (2007.2)
http://chooseopen.com/openmoko/build/qtopia/?M=D (Qtopia)

Kevin_Dean

Latest recommended snapshot review

ScaredyCat

http://buildhost.automated.it/OM2007.2/?M=D

ScaredyCat also has a opkg repository for 2007.2 where e.g. gpe-filemanager and a lot more (e.g. ntpd) can be installed from. On the Neo do:

cd /etc/opkg
wget http://buildhost.automated.it/scaredycat.conf 
opkg update
opkg install gpe-filemanager
opkg install gpe-timesheet
opkg install gpe-todo
opkg install mysql
opkg install mtpaint
opkg install sqlite
opkg install ntp
#(you get the idea)
/etc/init.d/xserver-nodm restart    # to make the new applications appear in the menu

mwester unofficial builds

http://moko.mwester.net/

celtune

http://rabenfrost.net/celtune/?C=M;O=D
http://rabenfrost.net/celtune/ipk/

Celtune offers Standard-Builds (.jffs2, .tar.gz, .bin, .ipk) and several special-images with additional packages (e.g. monster-images,navigation-images,...)

For more info take a look at http://rabenfrost.net/celtune/1-NEWS-WARNING-INFO

You can find images, kernels and packages for other devices too on http://rabenfrost.net/celtune/ (e.g. HTC-Blueangel, Asus730W ...)

A huge number of packages is located at http://rabenfrost.net/celtune/ipk/

Use the following line to add celtune's feed to your neo:

cd /etc/opkg && wget http://rabenfrost.net/celtune/celtune-rabenfrost.conf


FSO

The official feeds can be found at http://downloads.freesmartphone.org/ . The hosting is with thanks to our friends at NSLU2-Linux and Open Source Labs.

Jec

Jec hosts automatic IPKG builds for Openmoko on a dedicated server (P4 3.2 GHz) connected directly to Internet. Interested maintainers can contact Jean-Eric Cuendet < ml.jecuendet at gmail.com > for an account. Packages are at : http://alf.pticoli.net/openmoko/ . Created 9/9/2008, so I would not add it as a feed but opkg install URL.

Note

If you want to add a link, it would be nice to enforce a standard format of these feeds so that they can be browsed automatically.

Personal tools

For information about the official downloads and distributions, see Downloads. A Community Repository hosted by Openmoko Inc. was setup in August 2008.

WARNING: Never add feeds which are not for your installed distribution. Mixing feeds will break your system.


Angstrom Repository

Angstrom is the base distribution of Openmoko Linux distribution. It contains the basic set of Linux applications and they should be compatible with Openmoko. The repository package listing.

To add the unstable Angstrom feed, update your /etc/opkg/base-feeds.conf to include a line:

src/gz base http://www.angstrom-distribution.org/feeds/2007/ipk/glibc/armv4t/base

On Om 2008.8, run the following commands from the Neo:

 echo "arch base 50" > /etc/opkg/angstrom-feed.conf
 echo "src/gz base http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv4t/base" >> /etc/opkg/angstrom-feed.conf

This repository contains the following useful packages:

  • Pidgin - Instant Messaging. Can connect to MSN, Google Talk, Yahoo, ICQ with additional plugins
  • Minimo - Web Browsing. AJAX capable, based on the Gecko rendering engine
  • Navit - Car Navigation with Routing Engine

Jalimo

Jalimo is a project to maintain a full featured free Java-like stack for mobile Linux-based devices. The aim is to pack and tailor existing JVM-related projects, as well as to develop APIs and tools for easy integration and development for the target platforms.

OpenMoko provides most of Jalimo's packages through their own repository, but some packages have not been merged yet and are available through Jalimo's repositories. Run the following two commands to add them:

echo "src/gz jalimo http://jalimo.evolvis.org/repository/openmoko/all" > /etc/opkg/jalimo-feed-all.conf
echo "src/gz jalimo-armv4t http://jalimo.evolvis.org/repository/openmoko/armv4t" > /etc/opkg/jalimo-feed-armv4t.conf

unsatisfied libgcc-s1 dependency: Currently you will get an error when installing OpenMoko packages from our repository since Jalimo is using OpenEmbedded's .dev branch to built the packages but OpenMoko is not. A workaround is to add -force-depends to the opkg command until we figured this out.

ChooseOpen

http://chooseopen.com/openmoko/build/2007.2/?M=D (2007.2)
http://chooseopen.com/openmoko/build/qtopia/?M=D (Qtopia)

Kevin_Dean

Latest recommended snapshot review

ScaredyCat

http://buildhost.automated.it/OM2007.2/?M=D

ScaredyCat also has a opkg repository for 2007.2 where e.g. gpe-filemanager and a lot more (e.g. ntpd) can be installed from. On the Neo do:

cd /etc/opkg
wget http://buildhost.automated.it/scaredycat.conf 
opkg update
opkg install gpe-filemanager
opkg install gpe-timesheet
opkg install gpe-todo
opkg install mysql
opkg install mtpaint
opkg install sqlite
opkg install ntp
#(you get the idea)
/etc/init.d/xserver-nodm restart    # to make the new applications appear in the menu

mwester unofficial builds

http://moko.mwester.net/

celtune

http://rabenfrost.net/celtune/?C=M;O=D
http://rabenfrost.net/celtune/ipk/

Celtune offers Standard-Builds (.jffs2, .tar.gz, .bin, .ipk) and several special-images with additional packages (e.g. monster-images,navigation-images,...)

For more info take a look at http://rabenfrost.net/celtune/1-NEWS-WARNING-INFO

You can find images, kernels and packages for other devices too on http://rabenfrost.net/celtune/ (e.g. HTC-Blueangel, Asus730W ...)

A huge number of packages is located at http://rabenfrost.net/celtune/ipk/

Use the following line to add celtune's feed to your neo:

cd /etc/opkg && wget http://rabenfrost.net/celtune/celtune-rabenfrost.conf


FSO

The official feeds can be found at http://downloads.freesmartphone.org/ . The hosting is with thanks to our friends at NSLU2-Linux and Open Source Labs.

Jec

Jec hosts automatic IPKG builds for Openmoko on a dedicated server (P4 3.2 GHz) connected directly to Internet. Interested maintainers can contact Jean-Eric Cuendet < ml.jecuendet at gmail.com > for an account. Packages are at : http://alf.pticoli.net/openmoko/ . Created 9/9/2008, so I would not add it as a feed but opkg install URL.

Note

If you want to add a link, it would be nice to enforce a standard format of these feeds so that they can be browsed automatically.