User talk:PTT

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Vario)
 
Line 5: Line 5:
 
I guess we have to build it and test.<br />                   
 
I guess we have to build it and test.<br />                   
 
[[User:Johan|Johan]] 16:44, 15 August 2007 (CEST)
 
[[User:Johan|Johan]] 16:44, 15 August 2007 (CEST)
 +
:The variometer resolution from flytek variometers is 0.1 m/s, the SMD500 has a resolution of 0.25 m, which would make 0.25 m/s at 1 measurement per second, if averaged over a few seconds this could be increased. Also it may be possible to take measurements at a higher rate, since one measurement takes 34 ms from what I understand from the specs. I bet building and testing is the best way to find out, it wouldn't be that hard with only one chip to be added. [[User:PTT|PTT]] 21:05, 15 August 2007 (CEST)

Revision as of 20:05, 15 August 2007

Vario

Hi PTT - I like your contributions to the Variometer page. I did not know about those nifty digital output pressure transducers. I am a little concerned about differentiating the digital signal in software - don't think it would make a good vario. I guess we have to build it and test.
Johan 16:44, 15 August 2007 (CEST)

The variometer resolution from flytek variometers is 0.1 m/s, the SMD500 has a resolution of 0.25 m, which would make 0.25 m/s at 1 measurement per second, if averaged over a few seconds this could be increased. Also it may be possible to take measurements at a higher rate, since one measurement takes 34 ms from what I understand from the specs. I bet building and testing is the best way to find out, it wouldn't be that hard with only one chip to be added. PTT 21:05, 15 August 2007 (CEST)
Personal tools

Vario

Hi PTT - I like your contributions to the Variometer page. I did not know about those nifty digital output pressure transducers. I am a little concerned about differentiating the digital signal in software - don't think it would make a good vario. I guess we have to build it and test.
Johan 16:44, 15 August 2007 (CEST)

The variometer resolution from flytek variometers is 0.1 m/s, the SMD500 has a resolution of 0.25 m, which would make 0.25 m/s at 1 measurement per second, if averaged over a few seconds this could be increased. Also it may be possible to take measurements at a higher rate, since one measurement takes 34 ms from what I understand from the specs. I bet building and testing is the best way to find out, it wouldn't be that hard with only one chip to be added. PTT 21:05, 15 August 2007 (CEST)