USB Product IDs
From Openmoko
HaraldWelte (Talk | contribs) m (fx2lafw) |
m (→Assigned/Allocated Openmoko USB Product IDs: style) |
||
(52 intermediate revisions by 3 users not shown) | |||
Line 14: | Line 14: | ||
By applying for an Openmoko Product ID, you acknowledge that either | By applying for an Openmoko Product ID, you acknowledge that either | ||
− | * the USB device you are developing is either an open hardware project (as per the OSHW Definition) | + | * the USB device you are developing is either an open hardware project (as per [http://www.oshwa.org/definition/ the OSHW Definition]), '''or''' |
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license | * the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license | ||
Line 20: | Line 20: | ||
In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including | In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including | ||
+ | * '''the string "request" somewhere in the subject''' | ||
* a name and short description of your usb device project | * a name and short description of your usb device project | ||
* the license under which you are releasing the hardware and/or software/firmware of the device | * the license under which you are releasing the hardware and/or software/firmware of the device | ||
Line 25: | Line 26: | ||
* if you need multiple Product IDs, please indicate + explain this at the first message, rather than applying for a second ID later | * if you need multiple Product IDs, please indicate + explain this at the first message, rather than applying for a second ID later | ||
+ | Feel free to also contact us on IRC, #openmoko channel on Freenode. | ||
'''Do not apply before your project is published under a FOSS license!''' | '''Do not apply before your project is published under a FOSS license!''' | ||
Line 69: | Line 71: | ||
|- | |- | ||
| 0x1457 / 0x1d50 || 0x5126 || TBD | | 0x1457 / 0x1d50 || 0x5126 || TBD | ||
+ | |- | ||
+ | | 0x1d50 || 0x5200-0x52ff || Reserved for use in documentation concerning the configuration of USB buses and devices. | ||
+ | |- | ||
+ | | 0x1d50 || 0x5300-0x53ff || [http://rockbox.org/ rockbox: free replacement firmware for digital music players] | ||
|- | |- | ||
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero] | | 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero] | ||
Line 330: | Line 336: | ||
| 0x1d50 || 0x6081 || [https://github.com/Nuand/bladeRF/wiki/Proposal-for-new-FX3-firmware-loading BladeRF bootloader] | | 0x1d50 || 0x6081 || [https://github.com/Nuand/bladeRF/wiki/Proposal-for-new-FX3-firmware-loading BladeRF bootloader] | ||
|- | |- | ||
− | | 0x1d50 || 0x6082 || [https://github.com/scanlime/fadecandy Facecandy | + | | 0x1d50 || 0x6082 || [https://github.com/scanlime/fadecandy Facecandy (USB DFU loader)] |
|- | |- | ||
− | | 0x1d50 || 0x6083 || [http://www.lightup.io LightUp] | + | | 0x1d50 || 0x6083 || [http://www.lightup.io LightUp (bootloader)] |
|- | |- | ||
| 0x1d50 || 0x6084 || [http://cgit.jvnv.net/arcin/ arcin arcade controller (USB DFU loader)] | | 0x1d50 || 0x6084 || [http://cgit.jvnv.net/arcin/ arcin arcade controller (USB DFU loader)] | ||
Line 338: | Line 344: | ||
| 0x1d50 || 0x6085 || [https://github.com/irkit/device IRKit for controlloing home electronics from iOS devices] | | 0x1d50 || 0x6085 || [https://github.com/irkit/device IRKit for controlloing home electronics from iOS devices] | ||
|- | |- | ||
− | | 0x1d50 || 0x6086 || [http:// | + | | 0x1d50 || 0x6086 || [http://onerng.info/ OneRNG entropy device] |
|- | |- | ||
| 0x1d50 || 0x6087 || [http://blinkinlabs.com/blinkytape Blinkytape (alternate USB endpoint config)] | | 0x1d50 || 0x6087 || [http://blinkinlabs.com/blinkytape Blinkytape (alternate USB endpoint config)] | ||
Line 370: | Line 376: | ||
| 0x1d50 || 0x6095 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | | 0x1d50 || 0x6095 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
|- | |- | ||
+ | | 0x1d50 || 0x6096 || [http://www.lightup.io LightUp (sketch)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6097 || [http://tessel.io/ Tessel JavaScript enabled Microcontroller with built-in WiFi] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6098 || [http://www.kickstarter.com/projects/1708444109/rfidler-a-software-defined-rfid-reader-writer-emul RFIDler] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6099 || [https://github.com/myriadrf/RASDR RASDR Radio Astronomy SDR Rx Interface] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609a || [https://github.com/myriadrf/RASDR RASDR Radio Astronomy SDR Tx Interface] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609b || [https://github.com/myriadrf/RASDR RASDR Radio Astronomy SDR Bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609c || [https://github.com/Galvant/antiafk_firmware antiAFK keyboard] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609d || [https://code.google.com/p/pic16f1454-bootloader/ PIC16F145x bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609e || [https://github.com/fabule/Clyde Clyde Lamp by Fabule (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609f || [https://github.com/fabule/Clyde Clyde Lamp by Fabule (sketch)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a0 || [http://smoothieware.org/smoothiepanel Smoothiepanel robotic control interface] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a1 || [https://github.com/airspy/host Airspy] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a2 || [http://barebox.org barebox bootloader USB DFU (Device Firmware Upgrade) Mode] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a3 || [https://github.com/Galvant/antiafk_firmwareantiAFK keyboard (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a4 || Papilio Duo (AVR) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a5 || Papilio Duo (FPGA) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a6 || [https://github.com/bvernoux/hydrafw/wiki HydraBus/HydraNFC (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a7 || [https://github.com/bvernoux/hydrafw/wiki HydraBus/HydraNFC] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a8 || reserved | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a9 || [https://github.com/blinkinlabs/blinkytile Blinky Light Controller (DFU bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60aa || [https://github.com/blinkinlabs/blinkytile Blinky Light Controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ab || [https://github.com/ManiacalLabs/AllPixel AllPixel USB control for major programmable LED strips] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ac || [http://feaser.com/openblt/doku.php OpenBLT generic microcontroller bootloader ] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ad || [https://github.com/gzip/eagle-usb-gamepad/ Clasic Gamepad USB Adapter (NES)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ae || [https://github.com/gzip/eagle-usb-gamepad/ Clasic Gamepad USB Adapter (N64)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60af || [https://github.com/gzip/eagle-usb-gamepad/ Clasic Gamepad USB Adapter (DB9)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b0 || [https://www.facebook.com/watterott.electronic/photos/a.211504945547854.54926.131472890217727/928577840507224 Waterott Arduino based Clock (caterina bootloader) ] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b1 || [https://github.com/felixekman/Drinkbot Drinkbot (processing)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b2 || [https://github.com/felixekman/Drinkbot Drinkbot (OTG-tablet support)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b3 || [https://calc.pw/ calc.pw password generator device (standard)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b4 || [https://calc.pw/ calc.pw password generator device (enhanced)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b5 || [http://code.timvideos.us/ TimVideos' HDMI2USB (FX2) - Unconfigured device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b6 || [http://code.timvideos.us/ TimVideos' HDMI2USB (FX2) - Firmware load/upgrade] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b7 || [http://code.timvideos.us/ TimVideos' HDMI2USB (FX2) - HDMI/DVI Capture Device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b8 || [http://code.timvideos.us/ TimVideos' HDMI2USB (Soft+UTMI) - Unconfigured device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b9 || [http://code.timvideos.us/ TimVideos' HDMI2USB (Soft+UTMI) - Firmware upgrade] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ba || [http://code.timvideos.us/ TimVideos' HDMI2USB (Soft+UTMI) - HDMI/DVI Capture Device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60bc || [http://www.moonbaseotago.com/cheaprf/programmer1/programmer1.html Simple CC25xx programmer / serial board] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60bd || [http://bhoreal.com/ Open Source control interface for multimedia applications] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60be || [https://github.com/pixelmatix/aurora Pixelmatix Aurora (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60bf || [https://github.com/pixelmatix/aurora Pixelmatix Aurora] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c0 || [https://github.com/thomask77/nucular-keyboard Nucular Keyboard USB-Adapter for older ThinkPad Keyboards] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c1 || [http://brewbit.com BrewBit Model-T pOSHW temperature controller for homebrewers (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c2 || [http://brewbit.com BrewBit Model-T pOSHW temperature controller for homebrewers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c3 || [http://x-at.github.io/xat/2015/01/13/arduino-board.html X Antenna Tracker arduino board] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c4 || [https://github.com/CANtact/cantact-fw CAN bus USB communication device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c5 || [https://github.com/74hc595/PIC16F1-USB-Bootloader PIC16F1 USB bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c6 || [http://altusmetrum.org/USBtrng/ USBtrng hardware random number generator] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c7 || [https://github.com/Zubax/zubax_gnss Zubax GNSS positioning module for light UAV systems] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c8 || [https://github.com/hbekel/xlink Xlink data transfer and control system for Commodore C64] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c9 || [https://github.com/alwynallan/redoubler random number generator] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ca || [https://github.com/DusteDdk/FinalKey FinalKey password manager] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60cb || [https://bitbucket.org/abe_k/pterodaq PteroDAQ Data Acquisition on FRDM-KL25Z and future boards] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60cc || [https://github.com/papcodientu/LamDiNao LamDiNao] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60cd || [https://www.openlighting.org Open Lighting DMX512 / RDM USB widget] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60de || [https://wiki.cryptech.is/browser/user/ft/stm32-avalanche-noise Cryptech.is random number generator] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60df || [http://hdmi2usb.tv/numato-opsis Numato Opsis HDMI2USB board - unconfigured] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e0 || [http://hdmi2usb.tv/numato-opsis Numato Opsis HDMI2USB board - JTAG Programming Mode] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e1 || [http://hdmi2usb.tv/numato-opsis Numato Opsis HDMI2USB board - User Mode] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e2 || [http://simtrace.osmocom.org Osmocom SIMtrace 2 - DFU loader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e3 || [http://simtrace.osmocom.org Osmocom SIMtrace 2 - Main Firmware] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e4 || [https://github.com/3DRacers 3D printed racing game - Catalina CDC bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e5 || [https://github.com/3DRacers 3D printed racing game - Application] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e6 || [https://github.com/greatscottgadgets/greatfet replacement for GoodFET/FaceDancer - GreatFet] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e7 || [https://github.com/greatscottgadgets/greatfet replacement for GoodFET/FaceDancer - GreatFet target] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e8 || [https://hackaday.io/project/8282-alpen-clack Alpen Clack keyboard] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e9 || [http://henning-bekel.de/keyman64 keyman64 keyboard itercepter] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ea || [https://github.com/scanlime/wiggleport/ Wiggleport FPGA-based I/O board] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60eb || [https://github.com/HubertD/candleLight candleLight CAN dongle] [https://github.com/HubertD/candleLight_gsusb firmware] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ec || [https://github.com/T3P3/Duet Duet 3D Printer Controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ed || (reserved 2016-07, followup 0x60ec) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ee || (reserved 2016-07, followup 0x60ec) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ef || (reserved 2016-07, followup 0x60ec) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f0 || [http://www.siphec.com/project/UDAD/ UDAD-T1 data aquisition device (boot)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f1 || [http://www.siphec.com/project/UDAD/ UDAD-T1 data aquisition device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f2 || [http://www.siphec.com/project/UDAD/ UDAD-T2 data aquisition device (boot)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f3 || [http://www.siphec.com/project/UDAD/ UDAD-T2 data aquisition device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f4 || [https://gitlab.com/uniti-arc/ Uniti ARC motor controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f5 || [https://github.com/Blinkinlabs/EightByEight EightByEight Blinky Badge (DFU)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f6 || [https://github.com/Blinkinlabs/EightByEight EightByEight Blinky Badge] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f7 || [http://cgit.jvnv.net/cardio/ cardio NFC/RFID card reader (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f8 || [http://cgit.jvnv.net/cardio/ cardio NFC/RFID card reader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60fc || [https://www.cryptotrust.net/products.html OnlyKey Two-factor Authentication & Password Solution] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6100 || '''0x1d50 0x???(0/4/8/c) #########- insert next record here -#########''' *R!* | ||
+ | |- | ||
+ | | 0x1d50 || 0x8085 || [http://madresistor.org/box0/ Box0 (box0-v5) - Free/Open source tool for exploring science and electronics] | ||
+ | |- | ||
+ | | 0x1d50 || 0xCC15 || [https://rad1o.badge.events.ccc.de/ rad1o badge for CCC congress 2015] | ||
|} | |} | ||
− | The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list | + | The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list. |
+ | |||
+ | The strings "reserved" or "*R!*" tag records not to get included in any updates sent upstream. They '''must not''' show up in any other record. | ||
+ | |||
+ | Groups of IDs (>=1) for one entity or project should get assigned starting at 0x???(0|4|8|c) and allow for a sufficient number (3, for prospective larger projects 7 or 15) of consecutive available free IDs for the previous project to grow. | ||
Revision as of 00:13, 10 August 2016
Contents |
USB Vendor and Product IDs
Open registry for community / homebrew USB Product IDs
Do not apply before your project is published under a FOSS license!
As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.
Do not apply before your project is published under a FOSS license!
Conditions
Do not apply before your project is published under a FOSS license!
By applying for an Openmoko Product ID, you acknowledge that either
- the USB device you are developing is either an open hardware project (as per the OSHW Definition), or
- the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license
Do not apply before your project is published under a FOSS license!
In order to request a product ID, please send an e-mail to usb-id@openmoko.org including
- the string "request" somewhere in the subject
- a name and short description of your usb device project
- the license under which you are releasing the hardware and/or software/firmware of the device
- a link to the project website and/or source code repository, if any
- if you need multiple Product IDs, please indicate + explain this at the first message, rather than applying for a second ID later
Feel free to also contact us on IRC, #openmoko channel on Freenode.
Do not apply before your project is published under a FOSS license!
Assigned/Allocated Openmoko USB Product IDs
Openmoko is using the USB Vendor and Product IDs below. Note that 0x1457 is the Vendor ID of FIC, Inc, and 0x1d50 is the vendor ID of Openmoko, Inc.
The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list.
The strings "reserved" or "*R!*" tag records not to get included in any updates sent upstream. They must not show up in any other record.
Groups of IDs (>=1) for one entity or project should get assigned starting at 0x???(0|4|8|c) and allow for a sufficient number (3, for prospective larger projects 7 or 15) of consecutive available free IDs for the previous project to grow.
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |