Paroli-issues

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Known issues & bug pre-reports)
(Known issues & bug pre-reports)
Line 37: Line 37:
 
* SIM: All SMS's and phone numbers are now saved in the phone memory, not in the SIM card
 
* SIM: All SMS's and phone numbers are now saved in the phone memory, not in the SIM card
  
* WLAN: Settings -> WIFI -> scan doesn't tell if it's searching or finished search with no results  
+
* WLAN: Settings -> WIFI -> scan doesn't tell if it's searching or finished search with no results (foster feature)*
  
 
* WLAN: Settings -> WIFI -> rename 'scan' to 'Networks'
 
* WLAN: Settings -> WIFI -> rename 'scan' to 'Networks'
  
* WLAN: Settings -> WIFI -> Show the name of the connected network instead of the small 'scan' text
+
* WLAN: Settings -> WIFI -> Show the name of the connected network instead of the small 'scan' text (foster feature)*
  
* WLAN: Settings -> WIFI -> Scan: show the IP, if connected
+
* WLAN: Settings -> WIFI -> Scan: show the IP, if connected (foster feature)*
  
* WLAN hidden networks cannot be connected with GUI yet
+
* WLAN hidden networks cannot be connected with GUI yet (foster feature)*
  
 
* RESUME doesn't turn on the screen lights -> one knows it's resumed only by touching the screen [http://www.paroli-project.org/trac/ticket/149 #149]
 
* RESUME doesn't turn on the screen lights -> one knows it's resumed only by touching the screen [http://www.paroli-project.org/trac/ticket/149 #149]
Line 66: Line 66:
  
 
* PROFILES may not be 100% reliable: changing the profile with AUX doesn't change it in settings -> phone (see http://scap.linuxtogo.org/files/0089ddba2f209e1bf6b8bc0f3c2279f2.png) (should be fixed 13-05-09)
 
* PROFILES may not be 100% reliable: changing the profile with AUX doesn't change it in settings -> phone (see http://scap.linuxtogo.org/files/0089ddba2f209e1bf6b8bc0f3c2279f2.png) (should be fixed 13-05-09)
 +
 +
 +
Foster feature : a feature that is looking for a caring, loving developer to implement and maintain it
  
 
= Feature wishlist =
 
= Feature wishlist =

Revision as of 10:59, 18 May 2009

This page is here to list the known issues with Paroli. If possible, link your issue / feature request to Paroli Trac and please attach /var/log/paroli.log and /var/log/frameworkd.log

Contents

Known issues & bug pre-reports

  • Enabling Illume from the menu requires a restart of the phone - this is only on e the first boot subsequent boots should change almost immediately
  • Phone sometimes fails to suspend after a received call #435
  • Contacts: Not all contacts are loaded from the SIM always #156
  • SMS: Writing an SMS that's longer than one line makes the first line disappear from the screen when one writes the second line. (couldn't reproduce, if you can, please report to trac)
  • SMS and People: cannot write unicode characters e.g cyrillic (Reading is no problem)
  • SMS : when sim card became full of sms i cannot recieve any new but there no notificaion about it
  • SMS: Not possible to call the sender of a SMS (no real bug, more a feature request)
  • UI: non-ascii chars (öäå etc) are shown correctly in the peoples list but fail in the detail contact view (replaced with ? )
  • UI: Empty I/O shows an 'edit' button.. maybe it should be hidden and instead a text 'no logged events' could be shown? (should be fixed < 18/05/2209)
  • UI There's nothing (no text/button) telling one should click in the black area to get to phonebook to select recipient in 'msgs' -> '+' or 'Tele'
  • UI: No visual feedback of shutting down #93
  • UI: when not in fullscreen mode (=illume enabled), one can't see the used profile in the home view
  • UI: When shutting down Paroli the dialog asking to leave paroli in the background has YES/NO buttons in bottom left corner. When getting the error messages for failing with loading GSM&GPRS, the OK button is in the bottom center.
  • ALARM: The alarm feature is currently not usable, it will be rewritten. Just don't try to use it :)
  • No keylock
  • SIM: If one by accidentally presses 'Enter in the PIN input view, it just accepts it and doesn't ask for PIN again but gives many error messages.
  • SIM: All SMS's and phone numbers are now saved in the phone memory, not in the SIM card
  • WLAN: Settings -> WIFI -> scan doesn't tell if it's searching or finished search with no results (foster feature)*
  • WLAN: Settings -> WIFI -> rename 'scan' to 'Networks'
  • WLAN: Settings -> WIFI -> Show the name of the connected network instead of the small 'scan' text (foster feature)*
  • WLAN: Settings -> WIFI -> Scan: show the IP, if connected (foster feature)*
  • WLAN hidden networks cannot be connected with GUI yet (foster feature)*
  • RESUME doesn't turn on the screen lights -> one knows it's resumed only by touching the screen #149
  • RESUME when usb connected it shouldnt suspend, just turn of the backlight. -> if suspends you loose the usb connect to your computer

Already fixed

  • After several calls Paroli freezes. It might eventually awake again some minutes later... (should be fixed 12-05-09)
  • SMS: There's no feedback after sending a message #3 (should be fixed 12-05-09)
  • SMS: When viewing a message, one doesn't see the name of the sender but the phone number (also when the number is saved in the phone memory) (should be fixed 12-05-09)
  • SMS: One can try to send an empty message with no number added. Paroli stays waiting for something to happen unless you kill the msgs app (should be fixed 13-05-09, #141 #148)
  • SMS: There's no character count in SMS view (should be fixed 13-05-09)
  • GPRS settings: if one by accident clicks 'username', 'APN', or 'password' instead of Connect, one actually has to re-type it because the 'back' button doesn't work. (should be fixed 13-05-09)


Foster feature : a feature that is looking for a caring, loving developer to implement and maintain it

Feature wishlist

  • Would it be possible to add a SMS button in the 'People' -> contact view. Now clicking the number calls the user (intuitive? Why clicking the name nothing happens?). Maybe adding 'dial' and 'SMS' -buttons there just to make it clear. #135
  • With hundreds of phone numbers it'd be great to be able to type at least the first letter, or two-three to be able to find the
  • The date doesn't need the | -bars in the home view: it's | Sunday, May 10, 2009 | - the bars just make it more difficult to read
  • renaming of I/O, Tele and Msgs in the menu (maybe to call log, SMS and dialer?)
  • The numbers in the home view showing missed calls or received messages could be bigger/colorful/something or even say 'one missed call' or 'new SMS received'
  • GUI that'd list apps and let me select: 'Do not suspend when any of the selected apps is running' so I could add games, gps etc there and automatically disable suspending
  • GPRS settings: maybe APN should be 'internet' by default, I think it's the most common APN?
  • GPRS settings: how about reordering the items so that the connect would be first or last in the list.
  • The button to 'go back / go to previous screen' keeps changing: In the menu there's a 'back' button (different size in different views) but in the people etc one has to know to press the top bar to go back.
  • Maybe reordering the main menu so that the phone log would not be the first one?
  • Incoming call / SMS lookup against the People database takes account of the number format (ie, if in People, Fred has the number +441234567890, and a call comes in from 01234567890, which is the same number but in UK-specific not internationalised format, Fred's name is not displayed). Would it be possible to match on the last 9 or 10 digits of the number, rather than the whole number? The chance of collisions in number space would be pretty small. #145 .
  • add an option to hide your number on outgoing calls (CLIR); perhaps add a flag in contacts to do this for certain people automatically

Reflashing Paroli

In this development phase its more error prone just reflash the phone as updating the paroli .opk package. (Because maybe other bugs are fixed outside of paroli)

First you need to boot into NAND (where you have already a working distribution and you can ssh into).
To be able to manipulate the sd card (you cant manipulate the sd card, if you booted from it).
00. Install Qi into NAND, and leave the factory installed uboot in NOR
0. Boot into NAND using the factory installed uboot from NOR.
Press and hold AUX and press power until the uboot menu does not appear.
Select the boot option by pressing the power button.
I have SHR in NAND. Any distribution is fine as long as you can ssh in.


1. download latest paroli .tar.gz:
http://downloads.openmoko.org/distro/unstable/NeoFreerunner/fso-paroli-image-om-gta02.tar.gz
http://downloads.openmoko.org/distro/unstable/NeoFreerunner/uImage-2.6.28-stable+gitr0+f19f259d3c1afde8eae53983fd19f61831927413-r2-om-gta02.bin
2. Boot the phone into NAND
3. scp the .bin and .tar.gz to the phone's /home/root dir.
(you may need this command to be able to connect to the phone: 
sudo ip address add 192.168.0.200/24 dev usb0
)
4. ssh into the phone:
ssh root@192.168.0.202
5. Umount the sd partition, where you paroli was (for me it was the 2. partition)
umount /media/mmcblk0p2/
6. recreate ext2 filesystem
mkfs.ext2 /dev/mmcblk0p2 

Note: It is better than erasing everything from the sd card. It does not stress your sd card unnecessary. The alternative method would be using rsync. Never figured it out myself the proper steps (using rsync and not formatting the partition)

7. Remount it
mount /dev/mmcblk0p2 /media/mmcblk0p2/
8. Untar the fso-paroli...tar.gz into the sd card:
cd /media/mmcblk0p2/
gunzip </home/root/fso-paroli-image-om-gta02.tar.gz |tar -xvf -
9. copy the uImage over (assuming you have Qi into NAND):
cd boot
cp /home/root/uImage-2.6.28-stable\+gitr0\+f19f259d3c1afde8eae53983fd19f61831927413-r2-om-gta02.bin .
ln -s uImage-2.6.28-stable\+gitr0\+f19f259d3c1afde8eae53983fd19f61831927413-r2-om-gta02.bin uImage-GTA02.bin
10. reboot
11. Have fun
Personal tools

This page is here to list the known issues with Paroli. If possible, link your issue / feature request to Paroli Trac and please attach /var/log/paroli.log and /var/log/frameworkd.log

Known issues & bug pre-reports

  • Enabling Illume from the menu requires a restart of the phone - this is only on e the first boot subsequent boots should change almost immediately
  • Phone sometimes fails to suspend after a received call #435
  • Contacts: Not all contacts are loaded from the SIM always #156
  • SMS: Writing an SMS that's longer than one line makes the first line disappear from the screen when one writes the second line. (couldn't reproduce, if you can, please report to trac)
  • SMS and People: cannot write unicode characters e.g cyrillic (Reading is no problem)
  • SMS : when sim card became full of sms i cannot recieve any new but there no notificaion about it
  • SMS: Not possible to call the sender of a SMS (no real bug, more a feature request)
  • UI: non-ascii chars (öäå etc) are shown correctly in the peoples list but fail in the detail contact view (replaced with ? )
  • UI: Empty I/O shows an 'edit' button.. maybe it should be hidden and instead a text 'no logged events' could be shown? (should be fixed < 18/05/2209)
  • UI There's nothing (no text/button) telling one should click in the black area to get to phonebook to select recipient in 'msgs' -> '+' or 'Tele'
  • UI: No visual feedback of shutting down #93
  • UI: when not in fullscreen mode (=illume enabled), one can't see the used profile in the home view
  • UI: When shutting down Paroli the dialog asking to leave paroli in the background has YES/NO buttons in bottom left corner. When getting the error messages for failing with loading GSM&GPRS, the OK button is in the bottom center.
  • ALARM: The alarm feature is currently not usable, it will be rewritten. Just don't try to use it :)
  • No keylock
  • SIM: If one by accidentally presses 'Enter in the PIN input view, it just accepts it and doesn't ask for PIN again but gives many error messages.
  • SIM: All SMS's and phone numbers are now saved in the phone memory, not in the SIM card
  • WLAN: Settings -> WIFI -> scan doesn't tell if it's searching or finished search with no results (foster feature)*
  • WLAN: Settings -> WIFI -> rename 'scan' to 'Networks'
  • WLAN: Settings -> WIFI -> Show the name of the connected network instead of the small 'scan' text (foster feature)*
  • WLAN: Settings -> WIFI -> Scan: show the IP, if connected (foster feature)*
  • WLAN hidden networks cannot be connected with GUI yet (foster feature)*
  • RESUME doesn't turn on the screen lights -> one knows it's resumed only by touching the screen #149
  • RESUME when usb connected it shouldnt suspend, just turn of the backlight. -> if suspends you loose the usb connect to your computer

Already fixed

  • After several calls Paroli freezes. It might eventually awake again some minutes later... (should be fixed 12-05-09)
  • SMS: There's no feedback after sending a message #3 (should be fixed 12-05-09)
  • SMS: When viewing a message, one doesn't see the name of the sender but the phone number (also when the number is saved in the phone memory) (should be fixed 12-05-09)
  • SMS: One can try to send an empty message with no number added. Paroli stays waiting for something to happen unless you kill the msgs app (should be fixed 13-05-09, #141 #148)
  • SMS: There's no character count in SMS view (should be fixed 13-05-09)
  • GPRS settings: if one by accident clicks 'username', 'APN', or 'password' instead of Connect, one actually has to re-type it because the 'back' button doesn't work. (should be fixed 13-05-09)


Foster feature : a feature that is looking for a caring, loving developer to implement and maintain it

Feature wishlist

  • Would it be possible to add a SMS button in the 'People' -> contact view. Now clicking the number calls the user (intuitive? Why clicking the name nothing happens?). Maybe adding 'dial' and 'SMS' -buttons there just to make it clear. #135
  • With hundreds of phone numbers it'd be great to be able to type at least the first letter, or two-three to be able to find the
  • The date doesn't need the | -bars in the home view: it's | Sunday, May 10, 2009 | - the bars just make it more difficult to read
  • renaming of I/O, Tele and Msgs in the menu (maybe to call log, SMS and dialer?)
  • The numbers in the home view showing missed calls or received messages could be bigger/colorful/something or even say 'one missed call' or 'new SMS received'
  • GUI that'd list apps and let me select: 'Do not suspend when any of the selected apps is running' so I could add games, gps etc there and automatically disable suspending
  • GPRS settings: maybe APN should be 'internet' by default, I think it's the most common APN?
  • GPRS settings: how about reordering the items so that the connect would be first or last in the list.
  • The button to 'go back / go to previous screen' keeps changing: In the menu there's a 'back' button (different size in different views) but in the people etc one has to know to press the top bar to go back.
  • Maybe reordering the main menu so that the phone log would not be the first one?
  • Incoming call / SMS lookup against the People database takes account of the number format (ie, if in People, Fred has the number +441234567890, and a call comes in from 01234567890, which is the same number but in UK-specific not internationalised format, Fred's name is not displayed). Would it be possible to match on the last 9 or 10 digits of the number, rather than the whole number? The chance of collisions in number space would be pretty small. #145 .
  • add an option to hide your number on outgoing calls (CLIR); perhaps add a flag in contacts to do this for certain people automatically

Reflashing Paroli

In this development phase its more error prone just reflash the phone as updating the paroli .opk package. (Because maybe other bugs are fixed outside of paroli)

First you need to boot into NAND (where you have already a working distribution and you can ssh into).
To be able to manipulate the sd card (you cant manipulate the sd card, if you booted from it).
00. Install Qi into NAND, and leave the factory installed uboot in NOR
0. Boot into NAND using the factory installed uboot from NOR.
Press and hold AUX and press power until the uboot menu does not appear.
Select the boot option by pressing the power button.
I have SHR in NAND. Any distribution is fine as long as you can ssh in.


1. download latest paroli .tar.gz:
http://downloads.openmoko.org/distro/unstable/NeoFreerunner/fso-paroli-image-om-gta02.tar.gz
http://downloads.openmoko.org/distro/unstable/NeoFreerunner/uImage-2.6.28-stable+gitr0+f19f259d3c1afde8eae53983fd19f61831927413-r2-om-gta02.bin
2. Boot the phone into NAND
3. scp the .bin and .tar.gz to the phone's /home/root dir.
(you may need this command to be able to connect to the phone: 
sudo ip address add 192.168.0.200/24 dev usb0
)
4. ssh into the phone:
ssh root@192.168.0.202
5. Umount the sd partition, where you paroli was (for me it was the 2. partition)
umount /media/mmcblk0p2/
6. recreate ext2 filesystem
mkfs.ext2 /dev/mmcblk0p2 

Note: It is better than erasing everything from the sd card. It does not stress your sd card unnecessary. The alternative method would be using rsync. Never figured it out myself the proper steps (using rsync and not formatting the partition)

7. Remount it
mount /dev/mmcblk0p2 /media/mmcblk0p2/
8. Untar the fso-paroli...tar.gz into the sd card:
cd /media/mmcblk0p2/
gunzip </home/root/fso-paroli-image-om-gta02.tar.gz |tar -xvf -
9. copy the uImage over (assuming you have Qi into NAND):
cd boot
cp /home/root/uImage-2.6.28-stable\+gitr0\+f19f259d3c1afde8eae53983fd19f61831927413-r2-om-gta02.bin .
ln -s uImage-2.6.28-stable\+gitr0\+f19f259d3c1afde8eae53983fd19f61831927413-r2-om-gta02.bin uImage-GTA02.bin
10. reboot
11. Have fun