Neo Freerunner audio subsystem

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Differences from Neo 1973)
(Alsamixer channel controls: control63)
Line 57: Line 57:
 
##* Control 12: "Mono Sidetone Playback Volume" (alsamixer name: "Mono sidetone" Suggested value: 5..7(max))
 
##* Control 12: "Mono Sidetone Playback Volume" (alsamixer name: "Mono sidetone" Suggested value: 5..7(max))
 
##* Control 5: "Mono Playback Volume" (alsamixer name: "Mono" Value: as needed)
 
##* Control 5: "Mono Playback Volume" (alsamixer name: "Mono" Value: as needed)
 +
##* Control 63: 'Mic Sidetone Mux' MANDATORY VALUE "Mic 2"!!!
 
## Speaker volume:
 
## Speaker volume:
 
##* Control 6: "Bypass Playback Volume"
 
##* Control 6: "Bypass Playback Volume"

Revision as of 23:09, 2 April 2009

The Neo Freerunner (GTA02) inherited the audio subsystem from its older brother the Neo 1973 (GTA01). However, there are a few small differences. This page tries to show and explain the differences and points you to the Neo 1973 page whenever it touches the common points (but there may be overlaps for the sake of usability). As wiki pages are, errors and omissions are likely, and your help is welcomed.

Contents

Differences from Neo 1973

  • There is only 1 (mono) built-in loud speaker (connected to LOUT1) instead of 2 (stereo).
  • The Wolfson Codec driver presents 94 separate controls {switches, multiplexers, and volumes} to the alsa system (in both Neos). Unfortunately they are not mapped exactly the same for the GTA01 as for the GTA02.

Possible sound connections through the Wolfson Codec

  • "Yes" = Confirmed, alsa state file exists.
  • "No" = Not possible / not desirable.
  • "Should" = Should be possible, not confirmed yet.
  • "?" = Have no idea.
- CPU GSM Bluetooth
GSM  ?
Bluetooth  ? Yes
Wired Speaker Yes Yes  ?
Wired Mic Yes Yes  ?
Body Earpiece Should Yes  ?
Body Speaker Yes Should  ?
Body Mic Should Yes  ?

Alsamixer channel controls

The ALSA state files are installed by default, and belong to package "openmoko-alsa-scenarios". To see where the files reside, do "opkg files openmoko-alsa-scenarios". Currently they are in "/usr/share/openmoko/scenarios/".

  1. State: GSM <-> Built-in Handset (file gsmhandset.state)
    1. Mic volume:
      • Control 48: "Mic2 Capture Volume" (alsamixer name: "Mic2". Suggested value: max)
      • Control 12: "Mono Sidetone Playback Volume" (alsamixer name: "Mono sidetone" Suggested value: 5..7(max))
      • Control 5: "Mono Playback Volume" (alsamixer name: "Mono" Value: as needed)
      • Control 63: 'Mic Sidetone Mux' MANDATORY VALUE "Mic 2"!!!
    2. Speaker volume:
      • Control 6: "Bypass Playback Volume"
      • Control 4: "Speaker Playback Volume"
  2. State: GSM <-> Built-in Handsfree (file gsmspeakerout.state)
    1. Mic volume:
      • Control ?:
    2. Speaker volume:
      • Control ?:
  3. State: GSM <-> Wired Headset (file gsmheadset.state)
    1. Mic volume:
      • Control 49: "Mic1 Capture Volume"
      • Control 12: "Mono Sidetone Playback Volume"
      • Control 5: "Mono Playback Volume"
    2. Speaker volume:
      • Control 6: "Bypass Playback Volume"
      • Control 3: "Headphone Playback Volume"
  4. State: GSM <-> Bluetooth Headset (file ???)
    1. Alternative working state files: [1]
    2. Mic volume:
      • Control 13: "Mono Voice Playback Volume"
      • Control 5: "Mono Playback Volume"
  5. State: CPU <-> Built-in Handset (file voip-handset.state)
    1. Mic volume:
      • Control ?:
    2. Speaker volume:
      • Control ?:
  6. State: CPU <-> Wired Headset (file headset.state)
    1. Stereo sound:
      • Control ?:
    2. Headset output:
      • Control 94: "Amp Spk Switch" <- false
  7. State: CPU <-> Buildin Speaker (file stereoout.state)
    1. Mono sound:
      • Control ?:
    2. Headset output:
      • Control 94: "Amp Spk Switch" <- true


  • These files I still don't know what they are for:

--Femto 12:39, 24 September 2008 (UTC) I've updated above values. Must be checked.

Volume Control

Angus Ainslie has written a simple python volume control (which is getting more and more sophisticated) using some of these settings.

Installing the GUI mixer

wget http://handheldshell.com/pymixer.py
wget http://handheldshell.com/volume.desktop
cp pymixer.py /usr/bin
chmod u+x /usr/bin/pymixer.py
cp volume.desktop /usr/share/applications
opkg install python-pygtk
opkg install http://handheldshell.com/python-pyalsaaudio_0.3-ml0_armv4t.ipk

If the python script aborts unexpectedly then look here for a fix

Personal tools

The Neo Freerunner (GTA02) inherited the audio subsystem from its older brother the Neo 1973 (GTA01). However, there are a few small differences. This page tries to show and explain the differences and points you to the Neo 1973 page whenever it touches the common points (but there may be overlaps for the sake of usability). As wiki pages are, errors and omissions are likely, and your help is welcomed.

Differences from Neo 1973

  • There is only 1 (mono) built-in loud speaker (connected to LOUT1) instead of 2 (stereo).
  • The Wolfson Codec driver presents 94 separate controls {switches, multiplexers, and volumes} to the alsa system (in both Neos). Unfortunately they are not mapped exactly the same for the GTA01 as for the GTA02.

Possible sound connections through the Wolfson Codec

  • "Yes" = Confirmed, alsa state file exists.
  • "No" = Not possible / not desirable.
  • "Should" = Should be possible, not confirmed yet.
  • "?" = Have no idea.
- CPU GSM Bluetooth
GSM  ?
Bluetooth  ? Yes
Wired Speaker Yes Yes  ?
Wired Mic Yes Yes  ?
Body Earpiece Should Yes  ?
Body Speaker Yes Should  ?
Body Mic Should Yes  ?

Alsamixer channel controls

The ALSA state files are installed by default, and belong to package "openmoko-alsa-scenarios". To see where the files reside, do "opkg files openmoko-alsa-scenarios". Currently they are in "/usr/share/openmoko/scenarios/".

  1. State: GSM <-> Built-in Handset (file gsmhandset.state)
    1. Mic volume:
      • Control 48: "Mic2 Capture Volume" (alsamixer name: "Mic2". Suggested value: max)
      • Control 12: "Mono Sidetone Playback Volume" (alsamixer name: "Mono sidetone" Suggested value: 5..7(max))
      • Control 5: "Mono Playback Volume" (alsamixer name: "Mono" Value: as needed)
    2. Speaker volume:
      • Control 6: "Bypass Playback Volume"
      • Control 4: "Speaker Playback Volume"
  2. State: GSM <-> Built-in Handsfree (file gsmspeakerout.state)
    1. Mic volume:
      • Control ?:
    2. Speaker volume:
      • Control ?:
  3. State: GSM <-> Wired Headset (file gsmheadset.state)
    1. Mic volume:
      • Control 49: "Mic1 Capture Volume"
      • Control 12: "Mono Sidetone Playback Volume"
      • Control 5: "Mono Playback Volume"
    2. Speaker volume:
      • Control 6: "Bypass Playback Volume"
      • Control 3: "Headphone Playback Volume"
  4. State: GSM <-> Bluetooth Headset (file ???)
    1. Alternative working state files: [1]
    2. Mic volume:
      • Control 13: "Mono Voice Playback Volume"
      • Control 5: "Mono Playback Volume"
  5. State: CPU <-> Built-in Handset (file voip-handset.state)
    1. Mic volume:
      • Control ?:
    2. Speaker volume:
      • Control ?:
  6. State: CPU <-> Wired Headset (file headset.state)
    1. Stereo sound:
      • Control ?:
    2. Headset output:
      • Control 94: "Amp Spk Switch" <- false
  7. State: CPU <-> Buildin Speaker (file stereoout.state)
    1. Mono sound:
      • Control ?:
    2. Headset output:
      • Control 94: "Amp Spk Switch" <- true


  • These files I still don't know what they are for:

--Femto 12:39, 24 September 2008 (UTC) I've updated above values. Must be checked.

Volume Control

Angus Ainslie has written a simple python volume control (which is getting more and more sophisticated) using some of these settings.

Installing the GUI mixer

wget http://handheldshell.com/pymixer.py
wget http://handheldshell.com/volume.desktop
cp pymixer.py /usr/bin
chmod u+x /usr/bin/pymixer.py
cp volume.desktop /usr/share/applications
opkg install python-pygtk
opkg install http://handheldshell.com/python-pyalsaaudio_0.3-ml0_armv4t.ipk

If the python script aborts unexpectedly then look here for a fix