English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català
One can find general information (porting/development) about Android on Neo phones here : Android.
Using the Android Manual
If you need some support for this Android Manual see Using Android Manual.
Prepare SD Card
On Linux Machine backup current data on Micro SD-Card with adapter. If SD-Card is located in /dev/sde use the following commands (replace /dev/sde by appropriate device name,
will help you to identify the device name and size of SD card: Create two partitions in the ratio 3 to 1 (e.g. 4000000 blocks):
- FAT32 (3/4 of total size of SD - e.g. blocks 16-3000000)
- EXT3 (1/4 of total size of SD - e.g. blocks 3000001-4000000)
Use fdisk to create partitions:
sudo fdisk /dev/sde
- -> p Check partitions
- -> d -> 1 Delete Partition 1 (repeat for other existing partitions)
- -> n -> 1 -> New partition 1 (enter first and last sector)
- -> t -> 1 -> c Set type c for FAT32 (LBA)
- -> a -> 1 Set boot flag for first partition
- -> n -> 2 -> New partition 2 (enter first and last sector)
- -> t -> 2 -> 83 Set type 83 for Linux partition
After fdisk operations, format both partitions. If SD-Card is located in /dev/sde use the following commands (replace /dev/sde by appropriate device name:
# mkfs.vfat -v -n and-media -F 32 /dev/sde1 # mkfs.ext3 -v -L and-data /dev/sde2
If you are root you can remove sudo from the command.
Android SDK on PC/Laptop
Instruction for installing Android SDK can be found on http://developer.android.com/sdk/installing.html.
- Download Android-SDK package
- On Linux you should append the path to the Android-SDK tools to the PATH-variable. Do do this edit your
- ~/.bash_profile or
- ~/.bashrc file.
Edit the line that sets the PATH environment variable and append the full path to the SDK directory tools/ separated with ":" at the end. If you don't see a line, that exports the PATH variable just add the following line:
Android on Freerunner
The homepage of Android on Freerunner can be found on http://code.google.com/p/android-on-freerunner/. The code.google-wiki guides you in preparing an SD-Card on your PC/Laptop, that will be inserted in your freerunner. After that you have reassembled your Freerunner and boot from MircoSD:
- hold the 'Aux button' (top left) in while you push the 'Power button' (bottom right)Android SDK on PC/Laptop
- Select Boot from microSD card (FAT+ext2) keep pressing the AUX button until the option is highlight
- Execute option Boot from microSD card (FAT+ext2) by pressing the Power Button.
Android Debug Bridge ADB
The Android debug bridge ADB provides an Computer-Freerunner interface. You main need adb, that is part of the Android SDK. You can download ADB by installing the Android-SDK. You will find information regarding Android-SDK on http://developer.android.com/sdk/index.html.
To improve the user guide screenshots are very helpful. Independent of your operating system on your PC (Linux, Mac, Windows) you can make screenshots with the SDK on triggered from your PC. Connect your Freerunner with Android via USB and enable USB-Debugging
- Applications > Development > USB-Debugging
- Anwendungen > Entwicklung > USB-Debugging (German)
You can make screenshots to enhance this guide by using ddms.
There are application for making a screenshot directly on your Freerunner, but you need a rooted Android for this.
Installation of Android on Freerunner
If you have prepared your SD-Card with as mentioned above in this article, you have to do just two more steps:
- Download the installation package and copy it unpacked on FAT32 partition of you SD card.
- Switch off your freerunner and Press/hold AUX-Button and press Power button together.
Backup your old Android User Data
If you already Android for Freerunner on your FR, you should backup your data before See Installing Android on Openmoko Freerunner for further information.
Android ADB connection
Establish USB Connection, e.g.
# ifconfig usb0 192.168.0.200 netmask 255.255.255.0
Add the following As root kill adb server and add device on 192.168.0.202
# adb kill-server # ADBHOST=192.168.0.202 adb devices
or on Ubuntu start an xterm window with
and execute the commands mentioned above in that window.
Buttons and Keyboard
- To turn the phone on; press and hold the power button for about 5 seconds
- To put the phone to sleep (and so lock it): hold the power button for about 1 second
- To wake the phone from sleep: tap the power button once, then once more to unlock the screen
- To turn the phone off: First wake it from sleep, then hold the power button for about 2 seconds. Choose 'Power off' in the menu that appears then click 'OK' Use the back button (aux) to delete the menu if one wants to continue.
- Tap the power button once to get the on screen keyboard. In many applications it also brings extra options.
The aux button is configured as the back button. If the application recognizes the back action, like the browser, it goes a page or action back. If not recognized, one leaves the application to the previous situation. Note the application is not killed. It stays active.
Pressing the AUX button for more than 3sec than all active application can be selected.
The Home Button
The G1 and G2 Android phones have a home button, a long press on this button creates a window with all the running applications.
There is no clear key now, to show the running applications. Sometimes by chance a window with icons of the running applications appears, and then one can jump to a different running application.
I suggest to create this button from a two second press on the aux button. A window with the icons of the running applications will appear. By tapping on the wanted application we can than jump to the running application.
The keyboard appears when you select a field for input text or numbers.
Making a call
Once the phone has started you will see a 'Dialer' icon on the desktop. Tap it and you will be presented with a dialing keypad. Enter the number you wish to dial and then touch the bar containing the number to call. If you make a mistake entering the number you can touch the backspace arrow to the right of the bar.
- The volume level when in a voice call is very low
Sending an SMS
Start SMS Application in Main Window.
Copy and pasting
Android has a copy and paste feature built in to it. By touching and holding on a text entry box for about 2 seconds the copy & paste menu will appear.
Works, can be tested with a simple game called Amazed. This can be installed on the current AoF images.
Android Eclair makes use of the accelerometers.
Works, latest kernels need permissions for second rfkill interface in init.rc to turn it on.
Proper working of GPS can observed with YGPS Satellites. It shows signal strength and location of each satellite.
To set up GPRS you need to enter the correct settings for your network: Tap the Application tab followed by Settings > Wireless controls > Mobile networks > Access Point Names. Now if you press the power button, a menu will appear allowing you to add a 'New APN'. Touch this then add your network's GPRS & MMS settings.
Once you have entered your APN details it maybe necessary to follow this procedure to start GPRS (you will only need to do this once):
Turn on Airplane mode, reboot, turn off Airplane mode
You may also have to carry out the DNS fix described below.
You can find most networks 'mcc' and 'mnc' numbers here
- O2 UK - Pay as you go
Enter these details to set up GPRS:
carrier="o2-UK-PAYG" (Name - can be anything) mcc="234" mnc="10" apn="payandgo.o2.co.uk" user="payandgo" server="Not set" password="password" type="default"
These details are also correct o2 settings but don't enter them, they stop GPRS from working properly at the moment.
mmsc="http://mmsc.mms.02.co.uk:8002" proxy="22.214.171.124" port="9201" mmsproxy="126.96.36.199" mmsport="9201"
- T-Mobile UK
Enter these details to set up GPRS:
carrier="T-Mobile-UK" (Name - can be anything) mcc="234" mnc="30" apn="general.t-mobile.uk" user="user" server="188.8.131.52" # server="184.108.40.206" (alternate server) password="wap" type="default"
- Orange France
Source : French Network parameter
GPRS settings (work):
apn="orange" user="orange" password="orange" mcc="208" mnc="01" type="default"
MMS settings (untested) :
apn="orange.acte" proxy="192.168.10.200" port="8080" user="orange" password : "orange" mmsc="http://mms.orange.fr" mms port="8080" mcc="208" mnc"01" type="mms"
Force use of Orange DNS in the ip-up script located in /system/etc/ppp :
/system/bin/setprop "net.gprs.dns1" "194.051.003.056"
- Cingular/Att U.S. (working with dns fix(14.6-cupcake), other than sending mms)
apn="wap.cingular" username="email@example.com" pass="cingular1" mmsc="mmsc.cingular.com" mms proxy="wireless.cingular.com" mms port = 80 mcc= 310 mnc= 410
Wifi works on current distribution of Android, it switches off, when Display goes black. When you use SipDroid SIP-Client for VoIP over Wifi, you will loose network connection.
- SipDroid lets you make phone calls over internet with your the internet connection of WiFi or your data flatrate, to save mobile phone costs and stay connected with one SIP-Account used at your home internet access and with your freerunner at the same time, e.g. with SIPgate you can register a SIP-Account that has real landline phone number. If you register this account in SipDroid you can accept landline phone calls e.g. in Germany with you Freerunner from anywhere in the world.
- install "Android Contacts Import" (this application is also available from AndAppStore)
- export your contact(s) as a vcard file from your contact application
- copy the file to your phone /sdcard/ directory
- on your phone run the ImportContacts application, choose the file you copied and select import. Wait until the phone says x vcards imported
That's it if you don't see your contacts, make sure you selected "view all contacts" in the contacts application options (contacts > power button > Display group > All contacts)
It imports only names and telephone numbers, everything else is not imported.
Works, Contacts->menu->Settings->SIM contacts importer.
You can copy files to your phone using either
This option is not (yet) available in Koolu beta 7
or, from the command line using
- the Android debug bridge to copy files to your phone :
ADBHOST=192.168.0.202 ./adb push file.txt /sdcard/
Can play OGG audio files and view pictures with the default applications
Waking up your phone might be a little bit tricky at the moment, there are several recipe/hints submitted by different people :
- 1-2s press of power button goes to sleep, wake up with long power button press, don't use screen timeouts, disable it in Settings->Sound & display->Screen timeout->Never timeout.
- Michael Trimarchi's images allow resume from suspend after two short presses. However, sometimes it takes a few tries for the phone to wake up.
- For me resume works best if i long press power until the main screen appears and the short power press that unlocks screen.
- During suspend the phone seems to wake up make an audible click and go back to sleep.
The general USB Networking guide should help you talk to your FreeRunner using IP over USB. However, please note that Android doesn't come with an ssh server installed by default. In order to gain shell access without an additional ssh server you can follow the instructions on the Android debug bridge page.
USB Host mode
- http://code.google.com/p/android-on-freerunner/downloads/list Build Version 0.1.1
echo 1 > /sys/class/i2c-adapter/i2c-0/0-0073/neo1973-pm-host.0/hostmode echo host > /sys/devices/platform/s3c-ohci/usb_mode
|TODO: If you know how to change the USB mode with Android, please explain it here. (See: To-Do List)|
I bought a mini USB keyboard that for my Neo, if someone has simple directions to use it with android, please explain it here.
USB mass storage
This setting is named "Enable USB mass storage". If you don't find it on Settings -> SD card & phone storage, you have to unhide it with Anycut. Install it then make a new shortcut Activity -> SD Card. Use this new shortcut to activate the option. This is not persistent after a reboot. See also 
|TODO: This doesn't seem to work with the Neo FreeRunner and current Android images. (See: To-Do List)|
Software installation and updates
For initial Android flashing, take a look at: Android on Freerunner
Install new software
Links/Video Tutorial on Installation
- How To Install Software that is not in your package manager on Android
- Suggested Software for Android on Freerunner
Manual install with browser download on Freerunner
- Enable to unknown source in Android settings > Application
- connect with WiFi to Access Point
- Use browser to navigate to download page
- Click to download software on your Freerunner
- Drag down top bar on browser window and wait until download is finished
- Click on downloaded file and install (Check features the software want to have access to)
- Install software
Please be careful which software you install on your system.
Manual install from Laptop/PC with ADB
Applications are packaged in .apk packages, to install a package (downloaded on your computer) do
./adb install app.apk
After making sure you can talk to your phone using the Android debug bridge
Android Market Place
Currently it is not possible to use the Android Market Place with the Neo Freerunner.
Update software (without reflashing)
Android Debug Bridge
To assist in debugging and to gain shell access to the phone with Android, you can use the instructions found here: Android debug bridge
Type in the the Android Terminal emulator (under Development Tools)
setprop EXTERNAL_STORAGE_STATE mounted
adb shell setprop EXTERNAL_STORAGE_STATE mounted
with the freerunner connected to a computer which has the Android SDK.