Mac OS X

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(USB Serial with minicom: more)
(USB Serial: +GNU (screen))
Line 71: Line 71:
 
=== USB Serial with screen ===
 
=== USB Serial with screen ===
 
{{Main|GNU screen}}
 
{{Main|GNU screen}}
The <code>screen</code> program is included with Mac OS X, and can be used from the terminal command line to connect to the serial console.   To do this, simply get to a shell prompt in the terminal and invoke <code>screen</code> as follows:
+
The <code>GNU screen</code> program is included with Mac OS X, and can be used from the terminal command line to connect to the serial console. To do this, simply get to a shell prompt in the terminal and invoke <code>screen</code> as follows:
 
<pre>
 
<pre>
 
% screen /dev/tty.usbmodem00000001
 
% screen /dev/tty.usbmodem00000001
Line 99: Line 99:
 
The built in Mac Terminal application <tt>Terminal.app</tt> can be used to access the USB serial port <tt>/dev/tty.usbmodem00000001</tt> (numbering may vary.)
 
The built in Mac Terminal application <tt>Terminal.app</tt> can be used to access the USB serial port <tt>/dev/tty.usbmodem00000001</tt> (numbering may vary.)
  
An easy way to do this is to configure the terminal with Script Editor, as described in the short article, [http://www.macosxhints.com/article.php?story=20061109133825654 ''Use 'screen' as a serial terminal emulator''](macosxhints.com).  Then,
+
An easy way to do this is to configure the terminal with Script Editor, as described in the short article, [http://www.macosxhints.com/article.php?story=20061109133825654 ''Use 'GNU screen' as a serial terminal emulator''](macosxhints.com).  Then,
  
 
# Press and hold {{aux}} and then press and hold {{power}} for 5 seconds
 
# Press and hold {{aux}} and then press and hold {{power}} for 5 seconds

Revision as of 11:48, 19 December 2009

Being primarily a Linux based project, the host platform of choice is Linux. However, it is entirely possible to work with Openmoko and Neo handsets using MacOS X, as you'll soon see.

There are actually two ways of working with Openmoko and MacOS X. One is simply to run a virtual machine in which case you would then follow the instructions for Linux.

On the other hand, if you wish to use MacOS X directly, please continue:

Contents

Flashing to your device

To operate the Phase 1 devices (Neo 1973), you need to flash a root file system first.

Graphical Flashing with Openmoko Flasher

Here are detailed instructions:

  1. download Version 1.4 or later of Openmoko Flasher from http://www.handheld-linux.com/wiki.php?page=Openmoko%20Flasher
  2. select the repository
  3. press the Refresh button (which loads the list of packages on the server)
  4. select and load the rootfs (takes some minutes for approx. 40 MByte)
  5. Now, on your Openmoko, hold the AUX button while pressing the Power button for 5 seconds
  6. the BOOT menu should appear
  7. connect the USB cable
  8. Press the Flash button
  9. the BOOT menu screen on the OM should show an indication that it has been switched to DFU mode
  10. (if it fails, unplug the Openmoko shortly and replug and try again (experience shows that it is needed up to three times)
  11. if it successfully flashed, you should be able to boot the Openmoko and continue configuring AJZaurusUSB

A Universal Binary version of dfu-utils tool (and libusb) is included in the Openmoko Flasher application bundle. You can access it as Openmoko Flasher.app/Contents/MacOS/dfu-util.

To flash from Terminal (which is sometimes required), see the directions below or in Flashing the Neo

To flash the kernel:

Openmoko\ Flasher.app/Contents/MacOS/dfu-util -a kernel -R -D uImage

To flash the root filesystem:

Openmoko\ Flasher.app/Contents/MacOS/dfu-util -a rootfs -R -D rootfs_filename.jffs2

To flash the boot loader to NAND

Openmoko\ Flasher.app/Contents/MacOS/dfu-util -a u-boot -R -D uboot.bin

When flashing succeeds (in any of the above cases) the following should be shown:

status(0) = No error condition is present
Done!
NOTE: If you get an error: Cannot set alternate interface: usb_set_altinterface: could not set alternate interface. You have to unplug and replug it again. Make sure it stays in the Boot menu during that! After you have replugged your openmoko you should see DFU: Switching to DFU Mode on the openmoko screen. Now you can execute the command again and this time it should work.

If somebody has a solution for this problem please contact me. - Anakron



Beginners Guide to Flashing Interfaces to the Neo Freerunner

In this guide I will be going over the steps to flash an interface onto the Freerunner.

  1. Download the openmoko flasher from http://www.handheld-linux.com/wiki.php?page=Openmoko%20Flasher . With this you will be able to flash the desired software to your device.
  2. You must find the repository for the specific interface you are going to flash. The Qtopia repository is located at http://other.lastnetwork.net/OpenMoko/ . The OM2008.9 repository is located at http://downloads.openmoko.org/distro/releases/Om2008.9/ . And the Android repository is located at http://people.openmoko.org/sean_mcneil/ .
  3. Now open the openmoko flasher and enter the URL for the repository of the desired interface. Next to where you entered the URL, you must click the drop down menu and choose Root File System. At the bottom of the flasher program click refresh. The Root File system file show appear. Once it appears, click Load and it will be loaded into the openmoko flasher.
  4. Now, with your Freerunner unplugged hold the AUX button while holding the power button (for about 5 seconds) until the BOOT menu appears. Now connect the Freerunner to your computer and click Flash. You may have to disconnect and reconnect the phone a few times until to goes into DFU mode. Once it is in DFU mode, flashing will work.
  5. Once the flashing is successful, the Freerunner will shut down. Now press the power button while holding the AUX button for 7-10 seconds until the NAND BOOT menu appears. From here, select Boot and you phone should boot to the new interface. (The AUX/Power button combination puts the phone into the NOR BOOT menu, which must be used for flashing. The Power/AUX button combination puts the phone into the NAND BOOT menu, which is usually used for booting after a flash. After the phone is booted once from the NAND menu, it can be booted normally in the future.)

Most of the time, only the rootfs has to be flashed in order for the interface to work, but sometimes the kernel has to be flashed along with the rootfs. In this case, before you flash the rootfs you should select kernel in the drop down menu on the openmoko flasher and follow the same directions.

Compiling dfu-util

Alternatively, you can compile dfu-util manually as described at http://wiki.openmoko.org/wiki/User:SNMoore but you need libusb (e.g. through MacPorts).

Connecting a Mac and an Openmoko device

USB Serial

It is possible to access the U-Boot Bootloader serial console from a Mac. You can use the Terminal application on Mac OS X, or minicom from Fink or MacPorts (formerly Darwin Ports.)

The USB driver creates cu and tty character devices, for example

$ ls -la /dev/tty.usb*
crw-rw-rw-   1 root  wheel   10,  18 Aug 23 14:10 /dev/tty.usbmodem00000001
$ ls -la /dev/cu.usb*
crw-rw-rw-   1 root  wheel   10,  19 Aug 23 14:10 /dev/cu.usbmodem00000001

USB Serial with screen

Main article: GNU screen


The GNU screen program is included with Mac OS X, and can be used from the terminal command line to connect to the serial console. To do this, simply get to a shell prompt in the terminal and invoke screen as follows:

% screen /dev/tty.usbmodem00000001

You should find yourself at the U-boot serial console prompt. To get out, type control+a followed by control+backslash.

USB Serial with minicom

Possible download: Dr. Jeffrey T. Frey: Minicom download and info; at the bottom
Universal USB serial driver (untested): PL2303 USB to Serial Driver for Mac OS X

The minicom program from the MacPorts collection can be used to access the USB serial port /dev/cu.usbmodem00000001 (numbering may vary.)

First install the program (assuming you already have MacPorts installed):

sudo port install minicom

Then launch it in configuration mode (the -s flag):

sudo minicom -s

Under "Serial Port Setup", set the Device to "/dev/cu.usbmodem00000001" and set Bps to "115200 8N1". Under "Modem and Dialing", enter empty strings for "Init string", "Reset string", and "Hang-up string". Save the setup as default ("dfl") then Exit.

You should now be able to access the bootloader console. You should exit from Minicom before disconnecting the smartphone, or else you will get an error about unplugging a USB device while it is in use.

USB Serial with Terminal

The built in Mac Terminal application Terminal.app can be used to access the USB serial port /dev/tty.usbmodem00000001 (numbering may vary.)

An easy way to do this is to configure the terminal with Script Editor, as described in the short article, Use 'GNU screen' as a serial terminal emulator(macosxhints.com). Then,

  1. Press and hold AUX Button and then press and hold POWER for 5 seconds
  2. Press AUX Button to select Set console to USB in the U-Boot menu, and POWER to execute it
  3. Start the serial terminal application. You should see a U-Boot command line prompt, such as
In:    usbtty
Out:   usbtty
Err:   usbtty
DEVICE_CONFIGURED: 1
Enabling automatic fast charge
GTA01Bv4 #

When you boot Linux on the smartphone, or if the smartphone powers down, Mac OS X will show a USB Device Unplug Notice, "The USB device has been unplugged while an application was still active. This can result in loss of data." This error is probably harmless.

USB Networking

There are several drivers you can use to talk to the RNDIS/Ethernet Gadget that the Neo1973 presents to its host system. The main difference between them is stability, and all have their own problems. Leopard needs further testing (Apple revised the driver and the Network System Settings).

Apple CDC Ethernet driver 10.4.10

MacOS X 10.4.10 and later includes a driver for RNDIS/Ethernet Gadget devices. Launch System Preferences -> Network and you should see "new interface detected enXX".

Issue: Each time you reboot the Neo, the interface will get a different Ethernet address. This in turn makes Mac OS X create a new configuration record. After a while you'll end up with a load of unusable enXX devices - if you don't periodically clean them out. Open System Preferences and go to Network -> Show(Network Port Configurations) -> Select an enXX -> Delete.

Note: this is not a problem to blame MacOSX for because it tries to make network configuration simpler based on the assumption of stable Ethernet addresses.

Apple CDC Ethernet driver 10.5.x

Issue:10.5 (Leopard) doesn't show a new ethernet interface for a Neo1973 running 2007.11. You'll only get the serial port, which is detected as a modem. The Ethernet device will show up in ifconfig though. If it doesn't, try the other driver below.

It turns out that the AppleUSBCDC driver prefers to use the CDC-ACM interface of USB networking devices instead of CDC-ECM with the exception of a broadcom network card. You can download a patched AppleUSBCDC driver that will recognize the usb id/vendor pair of g_ether and force it to use CDC-ECM. You can obtain the OS X 10.5.X patched driver from: http://bugcommunity.com/downloads/usbcdc-g_ether.zip. [Do not work? Openmoko 2009 16-june-2009 showed up as a modem (MacOS X.5.7) with this driver (ndis/ethernet) Glenn 10:54, 16 June 2009 (UTC)] Source code: http://bugcommunity.com/downloads/files/AppleUSBCDCDriver-g_ether.326.4.1.zip

The issue of multiple network interfaces showing up whenever the Neo is rebooted/power-cycled is due to the g_ether driver randomly setting the host and device mac addresses. This problem is remedied by passing the same host and device mac addresses during the modprobe of g_ether. [Not needed with MacOS X.5.7 and Openmoko 2009 16-june-2009. Simply reboot the Mac (again) and Openmoko appear again without changing network settings --Glenn 08:30, 17 June 2009 (UTC)]

For example:

modprobe g_ether host_addr=46:0d:9e:67:69:eb dev_addr=46:0d:9e:67:69:ec

AJZaurusUSB driver

You can also use the open source driver from [1]. It was developed for handheld devices like iPAQ, Sharp Zaurus and Motorola A760, but works for Openmoko as well. Download and install according to the manual found inside the package. The code is GPL'd (source available) and runs on both Intel and PPC Macs with 10.3, 10.4 and 10.5.

After rebooting or loading the kernel extension by hand, you should have a new Ethernet interface in your System Preferences/Network.

Note: This driver does not have the same problem as the Apple driver does, where it constantly adds to the list of interfaces each time you reboot the neo, because the driver provides a constant ethernet address independently what the Neo says. Only flashing a new kernel might force you to update.

Issue: This driver is sometimes a bit flaky, and a reboot of the Mac seems to bring it back. It is especially critical about hot unplugging the OM and sleep modes of MacBooks. This may even result in a Kernel Panic.

Network Settings

Open System Preferences and go to Network and you should see "new interface detected enXX". In the Show list box select the new interface - Ethernet Adapter enXX.

Use this configuration on the new interface:

IP-V4: manual
IP-Addr:  192.168.0.200 (you can use anything in 192.168.0.* but OM is configured by default to use 192.168.0.200 as the external gateway)
Subnet:   255.255.255.0 (should be the default - see tip below if have issue with these settings)
Router:   192.168.0.202 (not actually needed, OS X can figure this out for itself, unless you have other conflicting configurations)

Tip: If your Internet connection is also in the range 192.168.0.x then instead you might want/need to use:

Subnet:   255.255.255.248

However if you are running Leopard it may not let you set the subnet claiming that the IP 192.168.0.200 is an invalid address for that subnet. To get round this run the following from the OSX terminal (replacing en11 as appropriate):

sudo ifconfig en11 192.168.0.200 netmask 255.255.255.248

Testing Your Connection

You should be able to connect to your Neo! Try using Terminal (Applications->Utilities->Terminal) to ping the Neo at 192.168.0.202 and the roundtrip time should be between 1 and 2 ms.

ping 192.168.0.202

Then log into your Neo using ssh:

ssh root@192.168.0.202

The default password is blank.

You can also scp files back and forth or share displays with X11. Additional software and configuration could allow telnet, SMB, or many other possibilities using the TCP/IP network over your USB connection.

Try pinging your Mac PC from the Neo

ping 192.168.0.200

Try pinging the outside world (a Google IP address)

ping 74.125.19.147

If that works then your Mac is routing the neo globally--if not see Sharing Internet Connection with Mac.

Lastly, verify that DNS is correctly configured between the Neo & Network:

ping www.google.com

If that doesn't work then see Configuring Default Neo DNS to try and resolve the issue.

Congordulations Elizagreth!!! The Neo is networked together with the Mac and sharing the Mac's interweb connection.

Bluetooth Networking

In progress: This article or section documents one or more features whose implementation are in progress.

This approach is based on:

http://wiki.openmoko.org/wiki/Bluetooth_Support#Networking http://www.macosxhints.com/article.php?story=20051220221237711

Unfortunately we can't use the pand (PAN daemon for BNEP) or dund (Dial Up Networking daemon for LAP) since neither service is available for the Mac.

So, we configure a RFCOMM connection and a PPP gateway on the Mac. Finally, we connect the OM as a ppp client to the Mac.

The reversed direction (OM as the Access Point and the Mac as the client) is described shortly in http://wiki.openmoko.org/wiki/Manually_using_Bluetooth#PPP_Networking

Making the Mac a PPP over Bluetooth Access Point

In the Bluetooth System Preferences (10.4.11)

  • go to the Sharing pane
  • add a new service "BluetoothAccessPoint" of type RS-232
  • Enable that it is shown in the network preferences pane
  • Apply

In the Network System Preferences

  • activate the new network configuration (BluetoothAccessPoint)
  • go tot the Modem tab and change the modem to "Null Modem 115200"
  • Apply

In a Terminal, enter the following:

$ sudo /usr/sbin/pppd /dev/tty.BluetoothAccessPoint 115200 noauth local passive proxyarp asyncmap 0 silent persist :172.16.140.14

Here you see the 172.16.140.14 address, which makes it possible not to use natd, since it's in the same network as the Mac is. So the firewall knows where to sent it to -- no routing problems etc. Pick any free address in your private range. For instance, if you are using the following ... firewall: 192.168.1.1, Mac: 192.168.1.2, you can enter 192.168.1.3, assuming it's not used elsewhere on your network.

If you want to be sure you did it right, open the system.log file on the Mac (tail -f /var/log/system.log), and you should see something like this:

Jun 25 10:33:57 hostname pppd[679]:  pppd 2.4.2 (Apple version 229) started by username, uid 0
Jun 25 10:33:57 hostname pppd[679]:  Connect: ppp0 <--> /dev/tty.BluetoothAccessPoint

In Terminal, write

sudo sysctl -w net.inet.ip.forwarding=1

which should give the following feedback:

net.inet.ip.forwarding: 0 -> 1

In Terminal, write

sudo ifconfig ppp0 up.

Connecting the Openmoko as a Client to the Mac

On the Openmoko do the following

  • Power on bluetooth
root@fic-gta01:~$ echo "1" > /sys/bus/platform/devices/gta01-pm-bt.0/power_on
  • Scan for the Mac
root@fic-gta01:~$ hcitool scan
Scanning ...
        00:0E:6D:C0:0l:6A       Sho
        00:20:E0:5A:FE:C8       MacBook
  • start the PPP client
pppd 115000 192.168.1.202:192.168.1.200 local defaultroute pty 'rfcomm connect 0 00:16:CB:2F:A0:46 1'
  • Enjoy

WiFi Networking

In progress: This article or section documents one or more features whose implementation are in progress.

To Be Done.

Neo1973 as a Bluetooth GPRS modem

In progress: This article or section documents one or more features whose implementation are in progress.

To Be Done.

Enabling the Mac as an Internet Router

Here is described how to enable your Mac to serve as a Internet Router for your Openmoko device.

Note: you have to open all services you want to use from the Openmoko in the Mac Firewall.

USB connection

In the Sharing System Preferences

  • click the Internet tab
  • Check all the ethernet (en) interfaces you want to enable Internet access for (i.e. the USB connection)

SSH into your Neo and create /etc/resolv.conf, specify your Internet router IP address as the name server. You can simply copy the /etc/resolv.conf from your Mac.

scp /etc/resolv.conf root@192.168.0.202:/etc/resolv.conf
Example:
nameserver 192.168.1.200    # replace by your real nameserver address

Make sure your Neo routing table has entries so that all internet traffic is sent to your Mac (which will forward it to the outside world)

root@fic-gta01:~$ route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.0.0     *               255.255.255.0   U     0      0        0 usb0
default         192.168.0.200   0.0.0.0         UG    0      0        0 usb0

Don't forget to enable your USB interface for Internet Sharing!

Bluetooth connection

In progress: This article or section documents one or more features whose implementation are in progress.

Accessing data and services on your device

ssh

After making the USB connection work, start ssh:

ssh -l root 192.168.0.202

If you don't have installed the key, it will ask for a "yes" on the first connection. The root password is blank unless you change it.

MacBook-hns:~ hns$ ssh -l root 192.168.0.202
root@192.168.0.202's password: 
root@fic-gta01:~$ hostname
fic-gta01
root@fic-gta01:~$

NOTE: the ssh daemon (dropbear 0.49) on the Openmoko appears to have a bug when sending the exit status back to the client. From time to time you receive an exit status of 255.

SMB

In progress: This article or section documents one or more features whose implementation are in progress.

To Be Done.

X11

Launch Apple X11.

xhost +192.168.0.202.

On the Neo:

export DISPLAY=192.168.0.200:0.0

Synchronizing

In progress: This article or section documents one or more features whose implementation are in progress.

This is not done yet. Possible solutions are SyncML or ZMacSync http://www.dsitri.de/wiki.php?page=ZMacSync

ZMacSync does not yet synchronize but allows more easy access to the Openmoko through Terminal/ssh.


Developing Openmoko software on a Mac

Using virtualization software and MokoMakefile/OpenEmbedded

You can use VirtualBox, Parallels or VMWare to install your favourite Linux distribution and then develop just as on Linux.

There are some drawback since AFAIK dfu-util may not work correctly in such environments.

Parallels

Don't bother with Parallels Desktop for Mac (<=3), the current USB support is terrible and USB storage keys don't even work so there was no way I would try dfu-util. USB keys work under VMWare Fusion for Mac though I have yet to try dfu-util in an VM under VMWare Fusion as there is Openmoko Flasher for Mac. -- Eric

VMware Fusion

There is currently no vmplayer for OS X. But the Qtopia image (see http://wiki.openmoko.org/wiki/Developing_with_C%2B%2B_and_Qt#Use_pre-built_SDK) will work with VMware fusion. The script will search for vmplayer and complain. Just answer YES when asked if you have the vmplayer installed (I know, it's a lie, but...), and the script will run through. Afterwards open the directory where the files were installed and click on Qtopia.vmx.

In VMware Fusion USB Networking is working properly, just plug in the device and connect it to your virtual machine.

Unfortunately dfu-util is currently not working. In fact if you get dfu-util working via unplug/replug method on Mac OS X it works inside VMware too.

VirtualBox

dfu-util is not working, has some problems with getting exclusive access to the USB device.

Natively

In progress: This article or section documents one or more features whose implementation are in progress.

There are some efforts to get through process of compiling OE and Openmoko under mac: Openmoko_under_QEMU_on_MacOSX

GNUstep/mySTEP SDK

There is a QuantumSTEP/mySTEP project to port GNUstep to the Openmoko/Neo: [More Info] An SDK for Xcode/Interface Builder is also available: [Entry at Version Tracker] [More Info]

Tools for Developers

Some tools that run on MacOS X

mkfs.jffs2

[mkfs.jffs2] - make JFFS2 (root) file system (Universal Binary). Package includes sources and Xcode 2.4 project file to rebuild on MacOS X 10.4.11. NOT TESTED DEEPLY.

 mkfs.jffs2 --pad=0x700000 -o rootfs.jffs2 -e 0x4000 -n -d/tmp/jffsroot/

Crosscompiler Toolchain

[gcc 2.95.3] - OABI cross compiler toolchain (C, C++, Obj-C) with Linux headers (PPC and Intel Macs)

If someone has a newer one that works, please provide as an installable OSX Package.


Will the ones from MacPorts work? [[2]] I'm still trying to get QEMU to work and haven't had a chance to test it yet.

Other Resources

Search Software Repositories

[Keyword Openmoko] at VersionTracker

Discussion Fora

[Mac Issues Forum] at Open Embedded Software Foundation (was Zaurus User Group)

Personal tools

Being primarily a Linux based project, the host platform of choice is Linux. However, it is entirely possible to work with Openmoko and Neo handsets using MacOS X, as you'll soon see.

There are actually two ways of working with Openmoko and MacOS X. One is simply to run a virtual machine in which case you would then follow the instructions for Linux.

On the other hand, if you wish to use MacOS X directly, please continue:

Flashing to your device

To operate the Phase 1 devices (Neo 1973), you need to flash a root file system first.

Graphical Flashing with Openmoko Flasher

Here are detailed instructions:

  1. download Version 1.4 or later of Openmoko Flasher from http://www.handheld-linux.com/wiki.php?page=Openmoko%20Flasher
  2. select the repository
  3. press the Refresh button (which loads the list of packages on the server)
  4. select and load the rootfs (takes some minutes for approx. 40 MByte)
  5. Now, on your Openmoko, hold the AUX button while pressing the Power button for 5 seconds
  6. the BOOT menu should appear
  7. connect the USB cable
  8. Press the Flash button
  9. the BOOT menu screen on the OM should show an indication that it has been switched to DFU mode
  10. (if it fails, unplug the Openmoko shortly and replug and try again (experience shows that it is needed up to three times)
  11. if it successfully flashed, you should be able to boot the Openmoko and continue configuring AJZaurusUSB

A Universal Binary version of dfu-utils tool (and libusb) is included in the Openmoko Flasher application bundle. You can access it as Openmoko Flasher.app/Contents/MacOS/dfu-util.

To flash from Terminal (which is sometimes required), see the directions below or in Flashing the Neo

To flash the kernel:

Openmoko\ Flasher.app/Contents/MacOS/dfu-util -a kernel -R -D uImage

To flash the root filesystem:

Openmoko\ Flasher.app/Contents/MacOS/dfu-util -a rootfs -R -D rootfs_filename.jffs2

To flash the boot loader to NAND

Openmoko\ Flasher.app/Contents/MacOS/dfu-util -a u-boot -R -D uboot.bin

When flashing succeeds (in any of the above cases) the following should be shown:

status(0) = No error condition is present
Done!
NOTE: If you get an error: Cannot set alternate interface: usb_set_altinterface: could not set alternate interface. You have to unplug and replug it again. Make sure it stays in the Boot menu during that! After you have replugged your openmoko you should see DFU: Switching to DFU Mode on the openmoko screen. Now you can execute the command again and this time it should work.

If somebody has a solution for this problem please contact me. - Anakron



Beginners Guide to Flashing Interfaces to the Neo Freerunner

In this guide I will be going over the steps to flash an interface onto the Freerunner.

  1. Download the openmoko flasher from http://www.handheld-linux.com/wiki.php?page=Openmoko%20Flasher . With this you will be able to flash the desired software to your device.
  2. You must find the repository for the specific interface you are going to flash. The Qtopia repository is located at http://other.lastnetwork.net/OpenMoko/ . The OM2008.9 repository is located at http://downloads.openmoko.org/distro/releases/Om2008.9/ . And the Android repository is located at http://people.openmoko.org/sean_mcneil/ .
  3. Now open the openmoko flasher and enter the URL for the repository of the desired interface. Next to where you entered the URL, you must click the drop down menu and choose Root File System. At the bottom of the flasher program click refresh. The Root File system file show appear. Once it appears, click Load and it will be loaded into the openmoko flasher.
  4. Now, with your Freerunner unplugged hold the AUX button while holding the power button (for about 5 seconds) until the BOOT menu appears. Now connect the Freerunner to your computer and click Flash. You may have to disconnect and reconnect the phone a few times until to goes into DFU mode. Once it is in DFU mode, flashing will work.
  5. Once the flashing is successful, the Freerunner will shut down. Now press the power button while holding the AUX button for 7-10 seconds until the NAND BOOT menu appears. From here, select Boot and you phone should boot to the new interface. (The AUX/Power button combination puts the phone into the NOR BOOT menu, which must be used for flashing. The Power/AUX button combination puts the phone into the NAND BOOT menu, which is usually used for booting after a flash. After the phone is booted once from the NAND menu, it can be booted normally in the future.)

Most of the time, only the rootfs has to be flashed in order for the interface to work, but sometimes the kernel has to be flashed along with the rootfs. In this case, before you flash the rootfs you should select kernel in the drop down menu on the openmoko flasher and follow the same directions.

Compiling dfu-util

Alternatively, you can compile dfu-util manually as described at http://wiki.openmoko.org/wiki/User:SNMoore but you need libusb (e.g. through MacPorts).

Connecting a Mac and an Openmoko device

USB Serial

It is possible to access the U-Boot Bootloader serial console from a Mac. You can use the Terminal application on Mac OS X, or minicom from Fink or MacPorts (formerly Darwin Ports.)

The USB driver creates cu and tty character devices, for example

$ ls -la /dev/tty.usb*
crw-rw-rw-   1 root  wheel   10,  18 Aug 23 14:10 /dev/tty.usbmodem00000001
$ ls -la /dev/cu.usb*
crw-rw-rw-   1 root  wheel   10,  19 Aug 23 14:10 /dev/cu.usbmodem00000001

USB Serial with screen

Main article: GNU screen


The GNU screen program is included with Mac OS X, and can be used from the terminal command line to connect to the serial console. To do this, simply get to a shell prompt in the terminal and invoke screen as follows:

% screen /dev/tty.usbmodem00000001

You should find yourself at the U-boot serial console prompt. To get out, type control+a followed by control+backslash.

USB Serial with minicom

Possible download: Dr. Jeffrey T. Frey: Minicom download and info; at the bottom
Universal USB serial driver (untested): PL2303 USB to Serial Driver for Mac OS X

The minicom program from the MacPorts collection can be used to access the USB serial port /dev/cu.usbmodem00000001 (numbering may vary.)

First install the program (assuming you already have MacPorts installed):

sudo port install minicom

Then launch it in configuration mode (the -s flag):

sudo minicom -s

Under "Serial Port Setup", set the Device to "/dev/cu.usbmodem00000001" and set Bps to "115200 8N1". Under "Modem and Dialing", enter empty strings for "Init string", "Reset string", and "Hang-up string". Save the setup as default ("dfl") then Exit.

You should now be able to access the bootloader console. You should exit from Minicom before disconnecting the smartphone, or else you will get an error about unplugging a USB device while it is in use.

USB Serial with Terminal

The built in Mac Terminal application Terminal.app can be used to access the USB serial port /dev/tty.usbmodem00000001 (numbering may vary.)

An easy way to do this is to configure the terminal with Script Editor, as described in the short article, Use 'GNU screen' as a serial terminal emulator(macosxhints.com). Then,

  1. Press and hold AUX Button and then press and hold POWER for 5 seconds
  2. Press AUX Button to select Set console to USB in the U-Boot menu, and POWER to execute it
  3. Start the serial terminal application. You should see a U-Boot command line prompt, such as
In:    usbtty
Out:   usbtty
Err:   usbtty
DEVICE_CONFIGURED: 1
Enabling automatic fast charge
GTA01Bv4 #

When you boot Linux on the smartphone, or if the smartphone powers down, Mac OS X will show a USB Device Unplug Notice, "The USB device has been unplugged while an application was still active. This can result in loss of data." This error is probably harmless.

USB Networking

There are several drivers you can use to talk to the RNDIS/Ethernet Gadget that the Neo1973 presents to its host system. The main difference between them is stability, and all have their own problems. Leopard needs further testing (Apple revised the driver and the Network System Settings).

Apple CDC Ethernet driver 10.4.10

MacOS X 10.4.10 and later includes a driver for RNDIS/Ethernet Gadget devices. Launch System Preferences -> Network and you should see "new interface detected enXX".

Issue: Each time you reboot the Neo, the interface will get a different Ethernet address. This in turn makes Mac OS X create a new configuration record. After a while you'll end up with a load of unusable enXX devices - if you don't periodically clean them out. Open System Preferences and go to Network -> Show(Network Port Configurations) -> Select an enXX -> Delete.

Note: this is not a problem to blame MacOSX for because it tries to make network configuration simpler based on the assumption of stable Ethernet addresses.

Apple CDC Ethernet driver 10.5.x

Issue:10.5 (Leopard) doesn't show a new ethernet interface for a Neo1973 running 2007.11. You'll only get the serial port, which is detected as a modem. The Ethernet device will show up in ifconfig though. If it doesn't, try the other driver below.

It turns out that the AppleUSBCDC driver prefers to use the CDC-ACM interface of USB networking devices instead of CDC-ECM with the exception of a broadcom network card. You can download a patched AppleUSBCDC driver that will recognize the usb id/vendor pair of g_ether and force it to use CDC-ECM. You can obtain the OS X 10.5.X patched driver from: http://bugcommunity.com/downloads/usbcdc-g_ether.zip. [Do not work? Openmoko 2009 16-june-2009 showed up as a modem (MacOS X.5.7) with this driver (ndis/ethernet) Glenn 10:54, 16 June 2009 (UTC)] Source code: http://bugcommunity.com/downloads/files/AppleUSBCDCDriver-g_ether.326.4.1.zip

The issue of multiple network interfaces showing up whenever the Neo is rebooted/power-cycled is due to the g_ether driver randomly setting the host and device mac addresses. This problem is remedied by passing the same host and device mac addresses during the modprobe of g_ether. [Not needed with MacOS X.5.7 and Openmoko 2009 16-june-2009. Simply reboot the Mac (again) and Openmoko appear again without changing network settings --Glenn 08:30, 17 June 2009 (UTC)]

For example:

modprobe g_ether host_addr=46:0d:9e:67:69:eb dev_addr=46:0d:9e:67:69:ec

AJZaurusUSB driver

You can also use the open source driver from [1]. It was developed for handheld devices like iPAQ, Sharp Zaurus and Motorola A760, but works for Openmoko as well. Download and install according to the manual found inside the package. The code is GPL'd (source available) and runs on both Intel and PPC Macs with 10.3, 10.4 and 10.5.

After rebooting or loading the kernel extension by hand, you should have a new Ethernet interface in your System Preferences/Network.

Note: This driver does not have the same problem as the Apple driver does, where it constantly adds to the list of interfaces each time you reboot the neo, because the driver provides a constant ethernet address independently what the Neo says. Only flashing a new kernel might force you to update.

Issue: This driver is sometimes a bit flaky, and a reboot of the Mac seems to bring it back. It is especially critical about hot unplugging the OM and sleep modes of MacBooks. This may even result in a Kernel Panic.

Network Settings

Open System Preferences and go to Network and you should see "new interface detected enXX". In the Show list box select the new interface - Ethernet Adapter enXX.

Use this configuration on the new interface:

IP-V4: manual
IP-Addr:  192.168.0.200 (you can use anything in 192.168.0.* but OM is configured by default to use 192.168.0.200 as the external gateway)
Subnet:   255.255.255.0 (should be the default - see tip below if have issue with these settings)
Router:   192.168.0.202 (not actually needed, OS X can figure this out for itself, unless you have other conflicting configurations)

Tip: If your Internet connection is also in the range 192.168.0.x then instead you might want/need to use:

Subnet:   255.255.255.248

However if you are running Leopard it may not let you set the subnet claiming that the IP 192.168.0.200 is an invalid address for that subnet. To get round this run the following from the OSX terminal (replacing en11 as appropriate):

sudo ifconfig en11 192.168.0.200 netmask 255.255.255.248

Testing Your Connection

You should be able to connect to your Neo! Try using Terminal (Applications->Utilities->Terminal) to ping the Neo at 192.168.0.202 and the roundtrip time should be between 1 and 2 ms.

ping 192.168.0.202

Then log into your Neo using ssh:

ssh root@192.168.0.202

The default password is blank.

You can also scp files back and forth or share displays with X11. Additional software and configuration could allow telnet, SMB, or many other possibilities using the TCP/IP network over your USB connection.

Try pinging your Mac PC from the Neo

ping 192.168.0.200

Try pinging the outside world (a Google IP address)

ping 74.125.19.147

If that works then your Mac is routing the neo globally--if not see Sharing Internet Connection with Mac.

Lastly, verify that DNS is correctly configured between the Neo & Network:

ping www.google.com

If that doesn't work then see Configuring Default Neo DNS to try and resolve the issue.

Congordulations Elizagreth!!! The Neo is networked together with the Mac and sharing the Mac's interweb connection.

Bluetooth Networking

In progress: This article or section documents one or more features whose implementation are in progress.

This approach is based on:

http://wiki.openmoko.org/wiki/Bluetooth_Support#Networking http://www.macosxhints.com/article.php?story=20051220221237711

Unfortunately we can't use the pand (PAN daemon for BNEP) or dund (Dial Up Networking daemon for LAP) since neither service is available for the Mac.

So, we configure a RFCOMM connection and a PPP gateway on the Mac. Finally, we connect the OM as a ppp client to the Mac.

The reversed direction (OM as the Access Point and the Mac as the client) is described shortly in http://wiki.openmoko.org/wiki/Manually_using_Bluetooth#PPP_Networking

Making the Mac a PPP over Bluetooth Access Point

In the Bluetooth System Preferences (10.4.11)

  • go to the Sharing pane
  • add a new service "BluetoothAccessPoint" of type RS-232
  • Enable that it is shown in the network preferences pane
  • Apply

In the Network System Preferences

  • activate the new network configuration (BluetoothAccessPoint)
  • go tot the Modem tab and change the modem to "Null Modem 115200"
  • Apply

In a Terminal, enter the following:

$ sudo /usr/sbin/pppd /dev/tty.BluetoothAccessPoint 115200 noauth local passive proxyarp asyncmap 0 silent persist :172.16.140.14

Here you see the 172.16.140.14 address, which makes it possible not to use natd, since it's in the same network as the Mac is. So the firewall knows where to sent it to -- no routing problems etc. Pick any free address in your private range. For instance, if you are using the following ... firewall: 192.168.1.1, Mac: 192.168.1.2, you can enter 192.168.1.3, assuming it's not used elsewhere on your network.

If you want to be sure you did it right, open the system.log file on the Mac (tail -f /var/log/system.log), and you should see something like this:

Jun 25 10:33:57 hostname pppd[679]:  pppd 2.4.2 (Apple version 229) started by username, uid 0
Jun 25 10:33:57 hostname pppd[679]:  Connect: ppp0 <--> /dev/tty.BluetoothAccessPoint

In Terminal, write

sudo sysctl -w net.inet.ip.forwarding=1

which should give the following feedback:

net.inet.ip.forwarding: 0 -> 1

In Terminal, write

sudo ifconfig ppp0 up.

Connecting the Openmoko as a Client to the Mac

On the Openmoko do the following

  • Power on bluetooth
root@fic-gta01:~$ echo "1" > /sys/bus/platform/devices/gta01-pm-bt.0/power_on
  • Scan for the Mac
root@fic-gta01:~$ hcitool scan
Scanning ...
        00:0E:6D:C0:0l:6A       Sho
        00:20:E0:5A:FE:C8       MacBook
  • start the PPP client
pppd 115000 192.168.1.202:192.168.1.200 local defaultroute pty 'rfcomm connect 0 00:16:CB:2F:A0:46 1'
  • Enjoy

WiFi Networking

In progress: This article or section documents one or more features whose implementation are in progress.

To Be Done.

Neo1973 as a Bluetooth GPRS modem

In progress: This article or section documents one or more features whose implementation are in progress.

To Be Done.

Enabling the Mac as an Internet Router

Here is described how to enable your Mac to serve as a Internet Router for your Openmoko device.

Note: you have to open all services you want to use from the Openmoko in the Mac Firewall.

USB connection

In the Sharing System Preferences

  • click the Internet tab
  • Check all the ethernet (en) interfaces you want to enable Internet access for (i.e. the USB connection)

SSH into your Neo and create /etc/resolv.conf, specify your Internet router IP address as the name server. You can simply copy the /etc/resolv.conf from your Mac.

scp /etc/resolv.conf root@192.168.0.202:/etc/resolv.conf
Example:
nameserver 192.168.1.200    # replace by your real nameserver address

Make sure your Neo routing table has entries so that all internet traffic is sent to your Mac (which will forward it to the outside world)

root@fic-gta01:~$ route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.0.0     *               255.255.255.0   U     0      0        0 usb0
default         192.168.0.200   0.0.0.0         UG    0      0        0 usb0

Don't forget to enable your USB interface for Internet Sharing!

Bluetooth connection

In progress: This article or section documents one or more features whose implementation are in progress.

Accessing data and services on your device

ssh

After making the USB connection work, start ssh:

ssh -l root 192.168.0.202

If you don't have installed the key, it will ask for a "yes" on the first connection. The root password is blank unless you change it.

MacBook-hns:~ hns$ ssh -l root 192.168.0.202
root@192.168.0.202's password: 
root@fic-gta01:~$ hostname
fic-gta01
root@fic-gta01:~$

NOTE: the ssh daemon (dropbear 0.49) on the Openmoko appears to have a bug when sending the exit status back to the client. From time to time you receive an exit status of 255.

SMB

In progress: This article or section documents one or more features whose implementation are in progress.

To Be Done.

X11

Launch Apple X11.

xhost +192.168.0.202.

On the Neo:

export DISPLAY=192.168.0.200:0.0

Synchronizing

In progress: This article or section documents one or more features whose implementation are in progress.

This is not done yet. Possible solutions are SyncML or ZMacSync http://www.dsitri.de/wiki.php?page=ZMacSync

ZMacSync does not yet synchronize but allows more easy access to the Openmoko through Terminal/ssh.


Developing Openmoko software on a Mac

Using virtualization software and MokoMakefile/OpenEmbedded

You can use VirtualBox, Parallels or VMWare to install your favourite Linux distribution and then develop just as on Linux.

There are some drawback since AFAIK dfu-util may not work correctly in such environments.

Parallels

Don't bother with Parallels Desktop for Mac (<=3), the current USB support is terrible and USB storage keys don't even work so there was no way I would try dfu-util. USB keys work under VMWare Fusion for Mac though I have yet to try dfu-util in an VM under VMWare Fusion as there is Openmoko Flasher for Mac. -- Eric

VMware Fusion

There is currently no vmplayer for OS X. But the Qtopia image (see http://wiki.openmoko.org/wiki/Developing_with_C%2B%2B_and_Qt#Use_pre-built_SDK) will work with VMware fusion. The script will search for vmplayer and complain. Just answer YES when asked if you have the vmplayer installed (I know, it's a lie, but...), and the script will run through. Afterwards open the directory where the files were installed and click on Qtopia.vmx.

In VMware Fusion USB Networking is working properly, just plug in the device and connect it to your virtual machine.

Unfortunately dfu-util is currently not working. In fact if you get dfu-util working via unplug/replug method on Mac OS X it works inside VMware too.

VirtualBox

dfu-util is not working, has some problems with getting exclusive access to the USB device.

Natively

In progress: This article or section documents one or more features whose implementation are in progress.

There are some efforts to get through process of compiling OE and Openmoko under mac: Openmoko_under_QEMU_on_MacOSX

GNUstep/mySTEP SDK

There is a QuantumSTEP/mySTEP project to port GNUstep to the Openmoko/Neo: [More Info] An SDK for Xcode/Interface Builder is also available: [Entry at Version Tracker] [More Info]

Tools for Developers

Some tools that run on MacOS X

mkfs.jffs2

[mkfs.jffs2] - make JFFS2 (root) file system (Universal Binary). Package includes sources and Xcode 2.4 project file to rebuild on MacOS X 10.4.11. NOT TESTED DEEPLY.

 mkfs.jffs2 --pad=0x700000 -o rootfs.jffs2 -e 0x4000 -n -d/tmp/jffsroot/

Crosscompiler Toolchain

[gcc 2.95.3] - OABI cross compiler toolchain (C, C++, Obj-C) with Linux headers (PPC and Intel Macs)

If someone has a newer one that works, please provide as an installable OSX Package.


Will the ones from MacPorts work? [[2]] I'm still trying to get QEMU to work and haven't had a chance to test it yet.

Other Resources

Search Software Repositories

[Keyword Openmoko] at VersionTracker

Discussion Fora

[Mac Issues Forum] at Open Embedded Software Foundation (was Zaurus User Group)