View source for Connecting Neo 1973 with Debug Board v2

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Templates used on this page:

Return to Connecting Neo 1973 with Debug Board v2.

Personal tools

Connecting your Neo1973 with the Debug Board v2

Debug Board v2 side

NOTE: Only do this while the Debug Board is unpowered, i.e. the USB Upstream port is not connected


Debug Board v2 connector closed

Neo1973 debugboard v2 connector closed.jpg

Debug Board v2 connector open

Neo1973 debugboard v2 connector open.jpg

Debug Board v2 connector open with cable inserted

Neo1973 debugboard v2 connector open with cable.jpg

Debug Board v2 connector closed with cable inserted

Neo1973 debugboard v2 connector closed with cable.jpg

Neo1973 side

NOTE: Only do this while the Neo1973 is unpowered, i.e. the battery removed and the USB Upstream port is not plugged into a powered hub


Neo1973 connector closed

Gta01b v2 debugport closed.jpg

Neo1973 connector open

Gta01b v2 debugport open.jpg

Neo1973 connector open

Gta01b v2 debugport open with cable.jpg

Neo1973 connector closed with cable inserted

Gta01b v2 debugport closed with cable.jpg