Connecting Neo 1973 with Debug Board v2
From Openmoko
| Debug Board |
|
|---|
Connecting your Neo1973 with the Neo1973 Debug Board v2
The same procedure is suitable for Debug Board v3.
Debug Board v2 side
| NOTE: Only do this while the Debug Board is unpowered, i.e. the USB Upstream port is not connected |
Debug Board v2 connector closed
Debug Board v2 connector open
Debug Board v2 connector open with cable inserted
Debug Board v2 connector closed with cable inserted
Neo1973 side
| NOTE: Only do this while the Neo1973 is unpowered, i.e. the battery removed and the USB Upstream port is not plugged into a powered hub |
Get access to the Neo1973 debugport connector by disassembling it as described in Disassembling_Neo1973.
Neo1973 connector closed
Neo1973 connector open
Neo1973 connector open
Neo1973 connector closed with cable inserted
