Wishlist/Neo1973 P0 Review
From Openmoko
(touchscreen: add "how is it intepreted currently?") |
|||
Line 17: | Line 17: | ||
* internal NAND read/write speeds | * internal NAND read/write speeds | ||
* raw dump from s3c2410-ts device as you touch (click)/gesture/hold down with fingers/stylus | * raw dump from s3c2410-ts device as you touch (click)/gesture/hold down with fingers/stylus | ||
− | * raw dump when doing fake double-touch: one finger down and then tap with second finger or make gesture with second finger | + | ** raw dump when doing fake double-touch: one finger down and then tap with second finger or make gesture with second finger |
+ | ** corresponding events in X11 | ||
* some benchmarks | * some benchmarks | ||
<pre>dd bs=1024 count=10240 if=/dev/zero | time gzip -9 > /dev/null | <pre>dd bs=1024 count=10240 if=/dev/zero | time gzip -9 > /dev/null |
Revision as of 06:41, 9 March 2007
This is a page for those with P0 hardware to share their impressions of the device, and to respond to questions that may be raised about it.
See also Neo1973 Phase 0 -- Information for Phase 0 device owners
Neo1973_Hardware#GTA01Bv3 -- Hardware in Phase 0 phone
Contents |
Hardware
Found on IRC, pictures by:
- Koen provided these pictures, of the assembled and partially dissasembled phone.
- Rwhitby has posted pictures of his Neo1973 test rig
- hrw Size comparison between nokia6210, neo1973, SE k750i
- alphaone comparison of several phones running openmoko
Wishlist:
- microSD read/write speeds with various cards
- at the moment this probably crashes Neo1973
- internal NAND read/write speeds
- raw dump from s3c2410-ts device as you touch (click)/gesture/hold down with fingers/stylus
- raw dump when doing fake double-touch: one finger down and then tap with second finger or make gesture with second finger
- corresponding events in X11
- some benchmarks
dd bs=1024 count=10240 if=/dev/zero | time gzip -9 > /dev/null 10240+0 records in 10240+0 records out real 0m 4.94s user 0m 3.73s sys 0m 0.58s
time dd if=/dev/urandom bs=1024 count=10240 of=/dev/zero 10240+0 records in 10240+0 records out real 0m 34.95s user 0m 0.01s sys 0m 34.69s and another device: 10240+0 records in 10240+0 records out real 0m 37.01s user 0m 0.03s sys 0m 36.42s
time dd if=/dev/zero bs=1024 count=102400 of=/dev/zero real 0m 2.23s user 0m 0.12s sys 0m 2.08
- scp via SSH to the SD card is running with 300kb/s
- lsusb -v
root@fic-gta01:~$ lsusb -v Bus 1 Device 1: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.20-moko8 ohci_hcd iProduct 2 S3C24XX OHCI iSerial 1 s3c24xx bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0012 No power switching (usb 1.0) No overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0xff PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power root@fic-gta01:~$
- /proc/cpuinfo:
Processor : ARM920T rev 0 (v4l) BogoMIPS : 100.96 Features : swp half thumb CPU implementer : 0x41 CPU architecture: 4T CPU variant : 0x1 CPU part : 0x920 CPU revision : 0 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format A Cache format : Harvard I size : 16384 I assoc : 64 I line length : 32 I sets : 8 D size : 16384 D assoc : 64 D line length : 32 D sets : 8 Hardware : GTA01 Revision : 0230 Serial : 0000000000000000
(Transcribed from here.)
- ATI3 & ATI9 & AT&V output from GSM modem
- All those commands give an error, but see Hardware:AT_Commands for other results.
- Oh, how unfortunate. TI's Calypso is not PnP (ATI9) :-) --@Dexter 15:39, 8 March 2007 (CET)
- picture of the inside of the front and back cases, with a ruler for scale, also pcb back and front with ruler, to make it easier for people considering building hardware modifications.
Software
Wishlist:
- dmesg dump
- Currently not possible as dmesg is flooded with debug messages.--Coredump 00:38, 9 March 2007 (CET)
- pstree -Gupl output after all standard processes have started
- ps output after startup:
PID Uid VmSize Stat Command 1 root 584 S init [5] 2 root SWN [ksoftirqd/0] 3 root SW [watchdog/0] 4 root SW< [events/0] 5 root SW< [khelper] 10 root SW< [kthread] 56 root SW< [kblockd/0] 57 root SW< [ksuspend_usbd] 60 root SW< [khubd] 62 root SW< [kseriod] 73 root SW< [kapmd] 77 root SW [pdflush] 78 root SW [pdflush] 79 root SW< [kswapd0] 80 root SW< [aio/0] 117 root SW [mtdblockd] 137 root SW< [s3c24xx-spi-gpi] 168 root SW< [kmmcd] 187 root SWN [jffs2_gcd_mtd4] 227 root 452 S < udevd --daemon 848 root SW< [krfcommd] 950 daemon 380 S /sbin/portmap 986 root 624 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22 995 root 480 S /usr/sbin/apmd -P /etc/apm/apmd_proxy --proxy-timeout 30 1005 messageb 712 S /usr/bin/dbus-daemon --system 1013 root 632 S /sbin/syslogd -n -C 64 -m 20 1015 root 628 S /sbin/klogd -n 1034 root 736 S /sbin/hcid -f /etc/bluetooth/hcid.conf 1037 root 484 S /sbin/sdpd 1040 root 492 S /bin/hidd --server 1051 root 540 S /sbin/getty 38400 tty1 1057 root 696 S xinit /etc/X11/Xsession -- /usr/bin/Xfbdev :0 -br -pn -screen 480x640x1 1076 root 3540 S < /usr/bin/Xfbdev :0 -br -pn -screen 480x640x16 1081 root 692 S /bin/sh /etc/X11/Xsession 1086 root 716 S /usr/bin/dbus-daemon --fork --print-pid 4 --print-address 6 --session 1090 root 580 S run-parts /etc/X11/Xsession.d 1094 root 1624 S /usr/libexec/gconfd-2 1097 root 2160 S matchbox-window-manager -use_titlebar no -use_cursor no 1098 root 2252 S rxvt 1100 root 2420 S /usr/bin/settings-daemon 1101 root 848 S sh 1103 root 3072 S matchbox-desktop --icon-size 100 --icon-padding 60 --font sans-16 --tit 1104 root 2152 S matchbox-panel --orientation north -b /usr/share/openmoko/pixmaps/openm 1105 root 2112 S matchbox-panel --orientation south -b /usr/share/openmoko/pixmaps/openm 1106 root 2040 S mb-applet-menu-launcher 1107 root 1376 S mb-applet-launcher -o -1 -l mbterm.png mb-applet-xterm-wrapper.sh 1108 root 1900 S mbinputmgr 1109 root 1372 S mb-applet-launcher -na -l --title Screen Rotator /usr/share/pixmaps/xra 1110 root 1436 S mb-applet-battery 1115 root 1836 S matchbox-keyboard 1117 root 552 S logread -f 1145 root 1016 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22 1146 root 880 S -sh 1149 root 784 R ps
(From here.)
Connecting
By default Neo1973 has usb0 interface working. Under Linux you need to modprobe usbnet and configure usb0 interface:
ifconfig usb 192.168.0.200 netmask 255.255.255.0
Then ssh root@192.168.0.202 with empty password to get into phone.
Dialing
Dialing currently works only manually.