View source for Neo FreeRunner Hardware
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Neo FreeRunner Hardware.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Neo FreeRunner Hardware.
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
This is the detailed list of the hardware components used in Neo FreeRunner (development codename GTA02), Openmoko Inc.'s second smartphone. Differences between various GTA02 revisions is also described.
If you are looking for general hardware overview please look at the Neo FreeRunner page.
Board layout [1] and schematics [2] for GTA02 have been published, PDF format.
See also the Neo FreeRunner GTA02 Hardware Requirements used in making these component selections.
1. NOR Flash |
8. Audio Amplifier |
---|
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
Neo FreeRunner (GTA02) is the new generation hardware that runs Openmoko.
Using 4 in 1 laser pen
The Neo FreeRunner (GTA02) Battery is mechanically and electrically compatible with the Neo1973 GTA01 Battery, as well as limited compatibility with a Nokia BL6C battery. According to this post on the mailinglist. Photo of the battery inside the Neo1973.
GTA02 should come with one of following microSD card
AKII Technology Charger
Every hardware revision has its own u-boot image type. Thus, the bootloader has the revision hard-coded. The hardware revision is passed on to the kernel via the ATAG mechanism (ATAG_REVISION)
The kernel receives the ATAG_REVISION during bootup, and saves its contents in the "system_rev" global variable.
The kernel exports the system_rev variable in /proc/cpuinfo as "Revision :" line.