View source for Om 2008 Installer
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Om 2008 Installer.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Om 2008 Installer.
Installer is a tool for installing, updating and uninstalling programs on your Neo.
Installer uses a WiFi or USB network connection to connect to repositories.
[1] Connect to a WiFi network in the Settings application, or manually connect to a USB network connection before proceeding to Installer.
[2] In Installer, press the INSTALL button from the bottom bar to view a list of Categories. This is also the default page of the Installer application.
[3] Select a Category from the category list, then select a package to install.
[4] In the package information page, press the image box and confirm to begin.
[5] Once the progress bar shows Done, you will return to the Installer default page. Installation is then complete.
Sharing applications amongst users and developers is easy using the Multiverse. Anyone can upload applications or even their own repository to share with fellow Neo owners.
You can release your package with ipk file.
If you want your package to be shown on Installer, please add tag message on your package.
Category | Tag |
---|---|
Communication | group::communication |
Development | group::programming |
Games | group::games |
Maps | group::maps |
Miscellaneous | group::unknown |
Network | group::network |
Repos | group::repos |
For example:
PKG_TAGS_${PN} = "group::games"
> echo "arch community-repos 50" > community-repos.conf > echo "src community-repos http://downloads.openmoko.org/repository/Multiverse/" >> community-repos.conf
> sudo ifconfig usb0 192.168.0.200 > scp community-repos.conf root@192.168.0.202:/etc/opkg/
> ssh root@192.168.0.202 > echo 1 | sudo tee /proc/sys/net/ipv4/ip_forward > sudo iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -j MASQUERADE > scp /etc/resolv.conf root@192.168.0.202:/etc/
> ssh root@192.168.0.202 > iwlist eth0 scan Find a usable AP lets say OpenMind (Support it's an open AP) > iwconfig eth0 essid OpenMind > udhcpc eth0 Then pray, if successfull, remove default gw *twice*. > route -n # to see your gateway of eth0 say 192.168.1.1 > route del default > route del default > route add default gw 192.168.1.1 eth0 Then you can ping wiki.openmoko.org for testing :)
Click Settings Click WiFi Select an AP Input password if needed
after connecting to Neo > opkg update
For more information, refer to the reference section below.
[1] Assassin project - http://code.google.com/p/om-assassin/
[2] Packagekit project - http://packagekit.org/
[3] Opkg package management - http://wiki.openmoko.org/wiki/Opkg