Qtopia on FreeRunner/ru

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Option 2: Dual-Booting between Qtopia and 2007.2 (Qtopia boots from MicroSD card))
m
Line 1: Line 1:
 
{{Languages|Qtopia_on_FreeRunner}}
 
{{Languages|Qtopia_on_FreeRunner}}
  
This page provides instructions on how to install Qtopia (proper, not the [[ASU]] or [[QtopiaOnX11]] efforts) on the GTA02 (FreeRunner) phoneIt is similar to the [[Qtopia on Neo1973]] page.
+
Эта страница содержит инструкцию по установки Qtopia (proper, not the [[ASU]] или [[QtopiaOnX11]] efforts) на телефон GTA02 (FreeRunner).  Это семинар по[[Qtopia on Neo1973]].
  
 
{|align=right
 
{|align=right
Line 11: Line 11:
 
Смотри [http://doc.trolltech.com/qtopia4.3/release-4-3-2.html Заметки по релизу]
 
Смотри [http://doc.trolltech.com/qtopia4.3/release-4-3-2.html Заметки по релизу]
  
This image can successfully make and receive calls and text messages.  It can read all contacts from the SIM card (which the updated 2007.2 does not appear to be able to do).  It contains apps that appear to be more stable than the ones found in the 2007.2 image.  It has multiple input methods that appear to be more mature.  It does not, however, have a web browser or a GPS application. There is however a third-party GPS application [http://blog.wolfman.com/articles/2008/08/27/porting-xgps-to-qtopia-for-the-freerunner here]
+
Этот образ удачно поддерживает звонки и прием/отправку текстовых сообщений.  It can read all contacts from the SIM card (which the updated 2007.2 does not appear to be able to do).  It contains apps that appear to be more stable than the ones found in the 2007.2 image.  It has multiple input methods that appear to be more mature.  It does not, however, have a web browser or a GPS application. There is however a third-party GPS application [http://blog.wolfman.com/articles/2008/08/27/porting-xgps-to-qtopia-for-the-freerunner here]
  
 
On 2nd of September 2008 Trolltech also released a 4.3.3-snapshot which fixes a number issues (sms messages not retrieved after resume; Qtopia getting confused between two calls; Make default call volume down and mic up; Added echo fix.)
 
On 2nd of September 2008 Trolltech also released a 4.3.3-snapshot which fixes a number issues (sms messages not retrieved after resume; Qtopia getting confused between two calls; Make default call volume down and mic up; Added echo fix.)

Revision as of 13:09, 8 September 2008


Эта страница содержит инструкцию по установки Qtopia (proper, not the ASU или QtopiaOnX11 efforts) на телефон GTA02 (FreeRunner). Это семинар поQtopia on Neo1973.

Contents

Текущий статус

On 29 August 2008, Trolltech опубликовал Qtopia образ для FIC Neo FreeRunner (gta02) содержащий релиз Qtopia 4.3.2 (Версия: 4.3.2-290808) (GPL version). Смотри Заметки по релизу

Этот образ удачно поддерживает звонки и прием/отправку текстовых сообщений. It can read all contacts from the SIM card (which the updated 2007.2 does not appear to be able to do). It contains apps that appear to be more stable than the ones found in the 2007.2 image. It has multiple input methods that appear to be more mature. It does not, however, have a web browser or a GPS application. There is however a third-party GPS application here

On 2nd of September 2008 Trolltech also released a 4.3.3-snapshot which fixes a number issues (sms messages not retrieved after resume; Qtopia getting confused between two calls; Make default call volume down and mic up; Added echo fix.)

You can find all the Qtopia images here

Опция 1: Прошивка Qtopia в FreeRunner

Скачать образ и инструкции здесь: Flashing the Neo FreeRunner

Опция 2: Двойная загрузка Qtopia и 2007.2 (Qtopia грузится с карточки MicroSD)

Необходимо для установки:

  1. SSH shell access to 2007.2 based image of the FreeRunner through USB interface or WLAN.
  2. A Desktop Linux distro (to unpack the .jffs2 image, I ran Ubuntu under VMWare)


Подготовка карточки SD

Смотри Preparing the SD Card секцию в Booting from SD страницу с инструкциями по подготовки и форматировании карты. После удачного шага "Форматирования SD Card", возвращаемся и выполняем следующие команды -создаем разделы на карточке:

 mount /dev/mmcblk0p1 /media/card
 mkdir /media/card/boot
 mkdir /media/mmcblk0p2
 mount /dev/mmcblk0p2 /media/mmcblk0p2

This will set you up properly for the installation of the root filesystem and the kernel in the steps below.

Установка Qtopia

Распаковка образа Qtopia Root

Download the Qtopia FLASH image from Latest Images#Qtopia image from qtopia.net to your Linux box and extract its contents:

 tar xzf qtopia-4.3.2-gta02-flash-*.tgz

You should now have two files:

  1. uImage-2.6.24+git18+9c058ff0d2641df3c36fc3300acb72078d2c41d4-r0-om-gta02.bin
  2. qtopia-4.3.2-gta02-rootfs-07172049.jffs2

Now, mount the root file system from the jffs2 using the commands found here.

Creating a compressed tarball

Next, tar up the root filesystem:

 # tar czf qtopia-4.3.2-gta02-rootfs-07172049.tar.gz -C <mountpoint> .

Where <mountpoint> is the location where the jff2 filesystem was mounted. Note the space and the period after the mountpoint.

Installing Root Filesystem

Transfer this compressed tarball to the second partition of the MicroSD that is mounted on the FreeRunner:

 scp qtopia-4.3.2-gta02-rootfs-07172049.tar.gz root@192.168.0.202:/media/mmcblk0p2/

Log in to your FreeRunner and unpack the root filesystem:

 cd /media/mmcblk0p2
 tar xzf qtopia-4.3.2-gta02-rootfs-07172049.tar.gz
 rm qtopia-4.3.2-gta02-rootfs-07172049.tar.gz
 rm -f /media/mmcblk0p2/boot/*

Note: the last step removes the kernel image from the second partition. For some reason, U-Boot cannot find the uImage.bin file in the first partition if a kernel image exists in the second partition boot/ directory.

Installing Kernel

From your Linux box, rename uImage-2.6.24+git18+9c058ff0d2641df3c36fc3300acb72078d2c41d4-r0-om-gta02.bin to uImage.bin and copy it to the boot directory on the first partition of the MicroSD card. Depending on the version of U-Boot you have installed, this may not work. To prevent any possible issues, copy it to the /media/card directory as well. There is plenty of room on the first partition to have uImage.bin in both locations.

 mv uImage-2.6.24+git18+9c058ff0d2641df3c36fc3300acb72078d2c41d4-r0-om-gta02.bin uImage.bin
 scp uImage.bin root@192.168.0.202:/media/card/boot/
 scp uImage.bin root@192.168.0.202:/media/card/

Option 3: updating from source

NOTE: This will upgrade only opt/Qtopia directory, you should use opkg update/upgrade for the rest


Original Qtopia images (the distribution released by Trolltech, not ASU) are rarely released as a rootfs image, but the source code is often updated. If you want to reflash your OM with the latest version of Qtopia you might build it from sources. This has been explained in this thread of the community mailing list. Summing up:

 cd /
 wget http://qtopia.net/downloads/neo/arm920t-eabi-ficgta01-toolchain.tgz
 tar xvzf arm920t-eabi-ficgta01-toolchain.tgz
  tar xvzf qtopia-opensource-src-4.3.2-snapshot-20080806.tar.gz
  • make a "build" dir
  mkdir build
  cd build
  • configure and make:
  ../qtopia-opensource-src-4.3.2-snapshot-20080806/configure -device ficgta01
  make 

This will take some time (couple hours). Note that the option "-device ficgta01" should work for both neo and freerunner. Then:

 make install

will make a root directory into the build directory. There you can find an image that directory should be copied to /opt/Qtopia of your phone with scp. once done restart qpe or whole phone.

Booting into Qtopia

Now shutdown the FreeRunner

 shutdown -h now

Log into U-Boot in the NAND Flash to boot from the MicroSD card: (instructions from Booting the Neo FreeRunner)

  • Press and hold Power button
  • Then while still pressing the Power button, press and hold AUX button for 5 to 8 seconds.
  • A boot menu will appear.
  • Press the AUX button to select "Boot from MicroSD" and then press the Power button to execute.

Qtopia should now boot.

Note: you may get a kernel panic which says that "optional features not supported". If this is the case, boot back into 2007.2 and run

 umount /dev/mmcblk0p2
 fsck.ext3.e2fsprogs /dev/mmcblk0p2

This will clean up the file system and clear recovery flags in ext3 that ext2 does not support, then try booting from the MicroSD again.

Internationalization

Qtopia comes with support for German and American English, and users from other countries will find that Qtopia's predictive keyboard makes writing in another language near impossible. One way to disable the predictive keyboard is to simply replace /opt/Qtopia/etc/dict/en_US/common.dawg and words.dawg with empty files (after backing them up). Qtopia normally looks in these files for words to suggest, and if it doesn't find any words that fit, it simply shows what you actually wrote.

Adding characters to the keyboard requires modifications to the source code, as described here.

Suspend /Resume

It seems that suspend/resume only works when the FreeRunner has been connected to a powersource (only a few seconds if sufficient). If you boot from battery, it will never suspend until you have plugged it in at least for a couple of seconds.

Bugs

See Trolltech's tracker.

Bug reports should be sent to qt-bugs@trolltech.com.

in 4.3.2 release

  • Voice notes seem not to work, only record a 44 bytes file, containing no voice
Personal tools


This page provides instructions on how to install Qtopia (proper, not the ASU or QtopiaOnX11 efforts) on the GTA02 (FreeRunner) phone. It is similar to the Qtopia on Neo1973 page.

Contents

Текущий статус

On 29 August 2008, Trolltech опубликовал Qtopia образ для FIC Neo FreeRunner (gta02) содержащий релиз Qtopia 4.3.2 (Версия: 4.3.2-290808) (GPL version). Смотри Заметки по релизу

This image can successfully make and receive calls and text messages. It can read all contacts from the SIM card (which the updated 2007.2 does not appear to be able to do). It contains apps that appear to be more stable than the ones found in the 2007.2 image. It has multiple input methods that appear to be more mature. It does not, however, have a web browser or a GPS application. There is however a third-party GPS application here

On 2nd of September 2008 Trolltech also released a 4.3.3-snapshot which fixes a number issues (sms messages not retrieved after resume; Qtopia getting confused between two calls; Make default call volume down and mic up; Added echo fix.)

You can find all the Qtopia images here

Опция 1: Прошивка Qtopia в FreeRunner

Скачать образ и инструкции здесь: Flashing the Neo FreeRunner

Опция 2: Двойная загрузка Qtopia и 2007.2 (Qtopia грузится с карточки MicroSD)

Необходимо для установки:

  1. SSH shell access to 2007.2 based image of the FreeRunner through USB interface or WLAN.
  2. A Desktop Linux distro (to unpack the .jffs2 image, I ran Ubuntu under VMWare)


Подготовка карточки SD

Смотри Preparing the SD Card секцию в Booting from SD страницу с инструкциями по подготовки и форматировании карты. После удачного шага "Форматирования SD Card", возвращаемся и выполняем следующие команды -создаем разделы на карточке:

 mount /dev/mmcblk0p1 /media/card
 mkdir /media/card/boot
 mkdir /media/mmcblk0p2
 mount /dev/mmcblk0p2 /media/mmcblk0p2

This will set you up properly for the installation of the root filesystem and the kernel in the steps below.

Установка Qtopia

Распаковка образа Qtopia Root

Download the Qtopia FLASH image from Latest Images#Qtopia image from qtopia.net to your Linux box and extract its contents:

 tar xzf qtopia-4.3.2-gta02-flash-*.tgz

You should now have two files:

  1. uImage-2.6.24+git18+9c058ff0d2641df3c36fc3300acb72078d2c41d4-r0-om-gta02.bin
  2. qtopia-4.3.2-gta02-rootfs-07172049.jffs2

Now, mount the root file system from the jffs2 using the commands found here.

Creating a compressed tarball

Next, tar up the root filesystem:

 # tar czf qtopia-4.3.2-gta02-rootfs-07172049.tar.gz -C <mountpoint> .

Where <mountpoint> is the location where the jff2 filesystem was mounted. Note the space and the period after the mountpoint.

Installing Root Filesystem

Transfer this compressed tarball to the second partition of the MicroSD that is mounted on the FreeRunner:

 scp qtopia-4.3.2-gta02-rootfs-07172049.tar.gz root@192.168.0.202:/media/mmcblk0p2/

Log in to your FreeRunner and unpack the root filesystem:

 cd /media/mmcblk0p2
 tar xzf qtopia-4.3.2-gta02-rootfs-07172049.tar.gz
 rm qtopia-4.3.2-gta02-rootfs-07172049.tar.gz
 rm -f /media/mmcblk0p2/boot/*

Note: the last step removes the kernel image from the second partition. For some reason, U-Boot cannot find the uImage.bin file in the first partition if a kernel image exists in the second partition boot/ directory.

Installing Kernel

From your Linux box, rename uImage-2.6.24+git18+9c058ff0d2641df3c36fc3300acb72078d2c41d4-r0-om-gta02.bin to uImage.bin and copy it to the boot directory on the first partition of the MicroSD card. Depending on the version of U-Boot you have installed, this may not work. To prevent any possible issues, copy it to the /media/card directory as well. There is plenty of room on the first partition to have uImage.bin in both locations.

 mv uImage-2.6.24+git18+9c058ff0d2641df3c36fc3300acb72078d2c41d4-r0-om-gta02.bin uImage.bin
 scp uImage.bin root@192.168.0.202:/media/card/boot/
 scp uImage.bin root@192.168.0.202:/media/card/

Option 3: updating from source

NOTE: This will upgrade only opt/Qtopia directory, you should use opkg update/upgrade for the rest


Original Qtopia images (the distribution released by Trolltech, not ASU) are rarely released as a rootfs image, but the source code is often updated. If you want to reflash your OM with the latest version of Qtopia you might build it from sources. This has been explained in this thread of the community mailing list. Summing up:

 cd /
 wget http://qtopia.net/downloads/neo/arm920t-eabi-ficgta01-toolchain.tgz
 tar xvzf arm920t-eabi-ficgta01-toolchain.tgz
  tar xvzf qtopia-opensource-src-4.3.2-snapshot-20080806.tar.gz
  • make a "build" dir
  mkdir build
  cd build
  • configure and make:
  ../qtopia-opensource-src-4.3.2-snapshot-20080806/configure -device ficgta01
  make 

This will take some time (couple hours). Note that the option "-device ficgta01" should work for both neo and freerunner. Then:

 make install

will make a root directory into the build directory. There you can find an image that directory should be copied to /opt/Qtopia of your phone with scp. once done restart qpe or whole phone.

Booting into Qtopia

Now shutdown the FreeRunner

 shutdown -h now

Log into U-Boot in the NAND Flash to boot from the MicroSD card: (instructions from Booting the Neo FreeRunner)

  • Press and hold Power button
  • Then while still pressing the Power button, press and hold AUX button for 5 to 8 seconds.
  • A boot menu will appear.
  • Press the AUX button to select "Boot from MicroSD" and then press the Power button to execute.

Qtopia should now boot.

Note: you may get a kernel panic which says that "optional features not supported". If this is the case, boot back into 2007.2 and run

 umount /dev/mmcblk0p2
 fsck.ext3.e2fsprogs /dev/mmcblk0p2

This will clean up the file system and clear recovery flags in ext3 that ext2 does not support, then try booting from the MicroSD again.

Internationalization

Qtopia comes with support for German and American English, and users from other countries will find that Qtopia's predictive keyboard makes writing in another language near impossible. One way to disable the predictive keyboard is to simply replace /opt/Qtopia/etc/dict/en_US/common.dawg and words.dawg with empty files (after backing them up). Qtopia normally looks in these files for words to suggest, and if it doesn't find any words that fit, it simply shows what you actually wrote.

Adding characters to the keyboard requires modifications to the source code, as described here.

Suspend /Resume

It seems that suspend/resume only works when the FreeRunner has been connected to a powersource (only a few seconds if sufficient). If you boot from battery, it will never suspend until you have plugged it in at least for a couple of seconds.

Bugs

See Trolltech's tracker.

Bug reports should be sent to qt-bugs@trolltech.com.

in 4.3.2 release

  • Voice notes seem not to work, only record a 44 bytes file, containing no voice