Nand erase

From Openmoko

Revision as of 16:17, 13 August 2007 by DanielRuoso (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

NAND erase

To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0.

After connecting, you should get a prompt, where you can write:

  1. nand erase clean rootfs
Retrieved from "http://wiki.openmoko.org/index.php?title=Nand_erase&oldid=16696"
Personal tools

NAND erase

To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0.

After connecting, you should get a prompt, where you can write:

  1. nand erase clean rootfs