Gpsdcontrol
From Openmoko
(Difference between revisions)
(→Screenshot) |
(→Installation) |
||
| Line 8: | Line 8: | ||
http://projects.openmoko.org/frs/download.php/458/gpsdcontrol_0.3_all.opk | http://projects.openmoko.org/frs/download.php/458/gpsdcontrol_0.3_all.opk | ||
| − | You can use repository http://minucci.net/file/opkg/ too | + | You can use repository http://minucci.net/file/opkg/ too. For add repository follow this command: |
| + | |||
| + | cd /etc/opkg | ||
| + | wget http://minucci.net/file/gecco-feed.conf | ||
==Screenshot== | ==Screenshot== | ||
Revision as of 13:19, 24 November 2008
Introduction
gpsdcontrol is a simple python script for turn on/off che gps antenna and start/stop the gpsd daemon. Is a simple icon on you openmoko desktop.
Installation
You can download from:
http://projects.openmoko.org/frs/download.php/458/gpsdcontrol_0.3_all.opk
You can use repository http://minucci.net/file/opkg/ too. For add repository follow this command:
cd /etc/opkg wget http://minucci.net/file/gecco-feed.conf
Screenshot
Before
After
