View source for Disassembling Neo 1973
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Disassembling Neo 1973.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Disassembling Neo 1973.
Disassembling the Neo1973
NOTE: This page was written as of GTA01Bv3 hardware revision and might need updating soon |
NOTE: You now need to remove the two Torx screws (T6x40) |
NOTE: You have to bend the plastic case a bit outwards until the headphone jack on the left side of the device becomes loose |
NOTE: Since the PCB now is loose on one side, you can carefully pull the USB socket and GPS antenna connector out of the right side of the case, and then flip the PCB upwards |
You can actually see the two stereo speakers beneath the translucent cover, and next to it the small vibrator motor.