Neo 1973 OpenOCD
From Openmoko
Contents |
About OpenOCD
OpenOCD is a 100% free software On-chip-debugger for commonly-found ARM JTAG probes such as wiggler, chamaeleon, jtag-key and others.
It provides a human-readable telnet interface for manually halting/resuming the target device, reading/writing registers and memory, etc.
In addition, it provides a RDI (remote debugger interface) on a TCP port. This interface can be used by gdb (the GNU Debugger).
The GTA01 development team uses OpenOCD with a wiggler compatible probe as their ICE solution.
Getting OpenOCD
Debian Package
We now have a Debian binary package of OpenOCD, available from http://people.gta01.hmw-consulting.de/laforge/dpkg. Installing this package is the preferred method to install OpenPCD on your development machine like
dpkg --install openocd_82-1_i386.deb
Source Code
OpenOCD Revision 82 has been proven to work with our QT2410 target board and wiggler. You can check rev. 82 out of the OpenOCD subversion via
svn co -r 82 http://svn.berlios.de/svnroot/repos/openocd/trunk
Configuration
User:HaraldWelte has provided a openocd.cfg configuration file for use of OpenOCD with wiggler and the QT2410 target board.
Known Bugs
- CP15 register read/write of ARM920T core not working
This has been reported upstream. Bugfix pending.