User:Thseiler
From Openmoko
(Difference between revisions)
m (Some thoughts on a gsmd wrapper) |
m (My Person and my ideas) |
||
Line 1: | Line 1: | ||
+ | === About me === | ||
+ | |||
+ | Thomas Seiler, MSc Telecom with a major in embedded systems. | ||
+ | |||
+ | My Interestes: | ||
+ | * Getting capacitive Sliderbar Sensors into the Neo GTA02/GTA03 (Cypress PSOC / Capsense) | ||
+ | * Makeing gsmd more robust | ||
+ | * Wrap platform functionality into a consistend DBUS based interface. | ||
+ | * Speeding up the boot process | ||
+ | |||
+ | |||
===Thoughts on gsmd=== | ===Thoughts on gsmd=== | ||
* do not reset modem on startup | * do not reset modem on startup | ||
* do instead query modem state | * do instead query modem state | ||
+ | * have a struct that represents the modems state | ||
* have a separad cli tool to init the modem via gsmd in a synchronnous manner, called from the rc-init scripts | * have a separad cli tool to init the modem via gsmd in a synchronnous manner, called from the rc-init scripts | ||
Latest revision as of 14:01, 7 October 2007
Contents |
[edit] About me
Thomas Seiler, MSc Telecom with a major in embedded systems.
My Interestes:
- Getting capacitive Sliderbar Sensors into the Neo GTA02/GTA03 (Cypress PSOC / Capsense)
- Makeing gsmd more robust
- Wrap platform functionality into a consistend DBUS based interface.
- Speeding up the boot process
[edit] Thoughts on gsmd
- do not reset modem on startup
- do instead query modem state
- have a struct that represents the modems state
- have a separad cli tool to init the modem via gsmd in a synchronnous manner, called from the rc-init scripts
[edit] Thoughts on possible DBUS wrapper for gsmd / asla / etc
Each independent Statemachine should be exported via its own DBUS object A signal should be broadcasted for each state change, so that the gui can react accordingly.
[edit] SIM Object
- Goal: Abstract away the fact that you need to access the SIM via gsmd, have a simple hook to show the corresponding dialog when needed.
- States: NO_SIM, NEED_PIN, NEED_PUK, NEED_PIN2, NEED_PUK2, OPEN, LOCKED
- Methodes: setPIN, setPUK, setPIN2, setPUK2, close, accessPhonebook, accessSMS, lowlevelQuery
[edit] GSM Network Object
- Goal: Abstract all Meta Information about the GSM Network, provide an interface to choose the network to connect to.
- States: NO_SIGNAL, EMERGENCY-ONLY, REGISTERED_HOME, REGISTERED_VISITOR
- Methodes: getNetworks, setPreferredNetwork, register, unregister, getDeviationStatus
[edit] IP Object
- States: UNCONNECTED, MODEM_BUSY, NO_IP, READY
- Connection Type: GPRS, CSD, WIFI, USBNET, OTHER
- Cost Indicator: LOW ..... MEDIUM ..... HIGH .... VERY_HIGH
- Methods: setProxy, getProxy, etc...
- Need to think this trough
[edit] VOICE-CALL Object
- States: ON-HOOK, DIALING, WAITING, TALKING, RINGING (incomming call)
- Methods: dial, cancel, accept, reject, getActiveCalls, putonhold, switch
- Problem: Single Statemachine is not ok when two calls are in progress at the
same time ?
[edit] VOICE-AUDIO Object
- States: STANDBY, OFFHOOK, MIC_MUTED
- Send signal on state change
- Methodes: provide methods to switch active audio during call, i.e. switchtoBTHeadset
- Need to think more about how to make this as generic as possible
- setup mixer to allow to record gsm conversation via /dev/dsp,
- and a switch for /dev/dsp playback into the gsm audio,
- option1: the other party can hear it. (this is probably hard)
- option2: only local party can hear it. (this is probably simple)
[edit] SIP Object
- Goal
- States: Unregistered, Registered
[edit] Presence Object
- Is this even needed ?