Gpsdcontrol
From Openmoko
(Difference between revisions)
(→Installation) |
(→Installation) |
||
Line 8: | Line 8: | ||
http://projects.openmoko.org/frs/download.php/458/gpsdcontrol_0.3_all.opk | http://projects.openmoko.org/frs/download.php/458/gpsdcontrol_0.3_all.opk | ||
− | + | and then: | |
+ | |||
+ | opkg install gpsdcontrol_0.3_all.opk | ||
+ | |||
+ | or directly: | ||
+ | |||
+ | opkg install http://projects.openmoko.org/frs/download.php/458/gpsdcontrol_0.3_all.opk | ||
+ | |||
+ | Or you can use repository http://minucci.net/file/opkg/ . For add repository follow this command: | ||
cd /etc/opkg | cd /etc/opkg | ||
wget http://minucci.net/file/gecco-feed.conf | wget http://minucci.net/file/gecco-feed.conf | ||
+ | |||
+ | and then: | ||
+ | |||
+ | opkg update | ||
+ | opkg install gpsdcontrol | ||
==Screenshot== | ==Screenshot== |
Revision as of 13:04, 25 November 2008
Introduction
gpsdcontrol is a simple python script for turn on/off che gps antenna and start/stop the gpsd daemon. Is a simple icon on you openmoko desktop.
Installation
You can download from:
http://projects.openmoko.org/frs/download.php/458/gpsdcontrol_0.3_all.opk
and then:
opkg install gpsdcontrol_0.3_all.opk
or directly:
opkg install http://projects.openmoko.org/frs/download.php/458/gpsdcontrol_0.3_all.opk
Or you can use repository http://minucci.net/file/opkg/ . For add repository follow this command:
cd /etc/opkg wget http://minucci.net/file/gecco-feed.conf
and then:
opkg update opkg install gpsdcontrol