View source for Neo 1973 OpenOCD
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Neo 1973 OpenOCD.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Neo 1973 OpenOCD.
OpenOCD is a 100% free software On-chip-debugger for commonly-found ARM JTAG probes such as wiggler, chamaeleon, jtag-key and others.
It provides a human-readable telnet interface for manually halting/resuming the target device, reading/writing registers and memory, etc.
In addition, it provides a RDI (remote debugger interface) on a TCP port. This interface can be used by gdb (the GNU Debugger).
The GTA01 development team uses OpenOCD with a wiggler compatible probe as their ICE solution.
We now have a Debian binary package of OpenOCD, available from http://people.gta01.hmw-consulting.de/laforge/dpkg. Installing this package is the preferred method to install OpenOCD on your development machine like
dpkg --install openocd_82-1_i386.deb
OpenOCD Revision 82 has been proven to work with our QT2410 target board and wiggler. You can check rev. 82 out of the OpenOCD subversion via
svn co -r 82 http://svn.berlios.de/svnroot/repos/openocd/trunk
User:HaraldWelte has provided a openocd.cfg configuration file for use of OpenOCD with wiggler and the QT2410 target board.
This has been reported upstream. Bugfix pending.