- Restart the X Server and Qtopia with the following command:
- Status of my configuration efforts concerning remote X11 (for infos on how to configure read here and in my personal wiki):
- SSH X11 forwarding of applications running on the freerunner does work.
- SSH X11 forwarding of applications running inside the debian chroot on the freerunner does not work at the moment.
- Remote X11 access of applications running on the freerunner does work at the moment.
- Remote X11 access of applications running inside the debian chroot on the freerunner does work at the moment.
- The font size of Qt applications can be changed using the program qtconfig. A font size of 4 fits nice on the screen. Debian package qt4-qtconfig.
- The font size of KDE 3 applications can be changed using the program kcontrol. A font size of 4 fits nice on the screen. Debian package kcontrol.
Paritions on my SD-card
- Stop qpe so that any currently mounted partitions on the SD-card can be safely unmounted:
~# /etc/init.d/xserver-nodm stop
- Then create this paritions:
~# fdisk -l /dev/mmcblk0 Disk /dev/mmcblk0: 7969 MB, 7969177600 bytes 4 heads, 16 sectors/track, 243200 cylinders Units = cylinders of 64 * 512 = 32768 bytes Device Boot Start End Blocks Id System # (ca. 50MiB, boot paritition, reserved for future use) /dev/mmcblk0p1 1 1527 48856 83 Linux # (ca. 500 Mib, swap parition) /dev/mmcblk0p2 1528 17153 500032 82 Linux # (ca. 7050 Mib, data parition) /dev/mmcblk0p3 17154 243200 7233504 83 Linux root@om-gta02:~#
This thread describes how to interpret the fdisk output.
- Create the swap parition:
~# mkswap /dev/mmcblk0p2
Edit the /etc/fstab:
/dev/mtdblock6 / jffs2 rw,noatime 1 1 proc /proc proc defaults 0 0 # microSD slot # boot parition (for future use) /dev/mmcblk0p1 /media/mmcblk0p1 auto defaults,async,noatime 0 0 # swap parition /dev/mmcblk0p2 none swap sw 0 0 # data parition /dev/mmcblk0p3 /media/card auto defaults,async,noatime 0 0
- Create the folder /media/mmcblk0p1.
- Activate the swap parition by rebooting or executing:
~# swapon /dev/mmcblk0p2
- No virtual keyboard gets invoked automatically!
- Follow this instructions. Console and X applications run inside the debian chroot. Most programs load without too much delay. Exceptions are e.g treeline.
Try to get to work the matchbox keyboard in Om 2008.12.Results: The matchbox keyboard is of no use, because I have not found a way to bring it up manually. The Illume keyboard allows this (though the "qwerty" button) and also is far more finger-friendly.
- Make sure that when stopping Wifi the device is also diabled to save energy.
notecase.Results: There are no binaries available that run on armel and do not depend on the Hildon application framework (which is used under Maemo). I have even tried the Zautus binaries. So I will have to find another outliner. Treeline seems a good choice.
- Tune Enlightenment. See here (speed).
- There is no Systray. If an applications places an icon in the systray the icon appears in the middle of the screen. However the Enlightenment task switcher is still functional.
- Don't forget to set a root password!
Not working software
- wicd (v1.5.6) does not seem to work.
- Mofi (v0.02) does not seem to work.
- Matchbox keyboard: Works using the following instructions: 1 and 2. The Qtopia keyboard has to be disabled because it overrules any other keyboards. Matchbox starts one matchbox process in daemon mode (matchbox-keyboard -d). However, a second matchbox-keyboard process has to be started before the keyboard operates correctly. The second process kann be after it has been started once. Therefore a keyboard that can be toggled on on off manually is required for my purposes. E.g. the Illume keyboard.
- Required dependencies:
- There are no packages available that do not depend on Hildon and have the correct architecture.
- Qt is available on Om 2008.12 (info).
- Use the Illume keyboard instead of the Qtopia one. Look here for instructions.
- Enable the search bar in the contacts application (instructions).
- Configure Wifi (instructions). Note: The SSH server only listens on the USB interface per default. Read here how to change this.
- Add two desktop icons. One for starting and another one for stopping Wifi. Read on here. Qtopia had to be restarted for one of the icons to show up. The .desktop files can be grouped in folder in the file system. On the desktop there is only a flat hierachy.
- Use the Illume theme. Apply all the tweaks regarding Illume mentioned here
- qtopia-phone-x11-datebook (in official repo): Calendaring application.
- vala-terminal (Homepage): Terminal.
- ttf-liberation-mono (in official repo): Required for vala-terminal. You have to reboot in order for the font to be used.
- midori (in official repo): Webbrowser.
- Install Pidgin (in official repo): Instant messenger. See here. Note: There is no desktop icon in the package. So install a custom one. The pidgin package also misses the required dependency pidgin-data. You need to install this manually.
The Openmoko calendar is still available in the repository (openmoko-dates2 - 0.1.0+svnr703-r2.03 - Legacy Om calendar application.). But the prefered calendar is the Qtopia Calendar (qtopia-phone-x11-datebook - 1:4.3.2+gitr476+ba3f443faec4cefcd3805158eef70921ed39f3de-r51 - Qtopia application for organizing dates and schedules.)
The Qtopia calendar supports the import of iCalendar files. The following character encodings have be confirmed to work:
Files encoded in UTF8 are not supported (non-ASCII characters get mangled on import). To change the character encoding use the following command:
$ iconv -c -f utf8 -t latin1 calendar-utf8.vcf > calendar-latin1.vcf
Note: You can reset the PIM data if you delete the ~/Applications/Qtopia/qtopia_db.sqlite file. But if you do so you have to restart Qtopia for the changes to take effect (process qpe). If you modify the database the changes take effect immediately.
- Although a fully functional window manager is included the windows can not be moved and resized arbitrary.
- Very buggy and slow at the moment.
Android (Beta 7)
- Voice calls have a good audio quality on both sides.
- I have found no way to change the volume for voice calls.