Search results

[[Image:GTA01-U-Boot.JPG|thumb|300px|U-Boot menu on Neo 1973]] [[Image:Neo1973 uboot splash closeup.jpg|thumb|300px|[[Configuring_the_boot_splash_screens# * Hold in the AUX button on power-up to access the boot menu.

==== Power Supply ==== * If the phone is self-powered, there is no need to connect a power supply for JTAG, USB and serial port, since those are phone-powered

{{Neo1973}} ...of Openmoko. You can find specifics of the [[:Category:Neo1973 Hardware | Neo1973 Hardware]] by reviewing this introduction page and the pages in the categor

...D Revision 82 and later have been proven to work with our [[QT2410]] and [[Neo1973]] target board and wiggler as well as Amontect JTAGkey and JTAGkey tiny. Y ...[NAND bad blocks#JTAG_.2F_OpenOCD_.2F_u-boot_RAM_based]], as well as the [[Neo1973 OpenOCD#Using OpenOCD telnet interface]] section below.

There are times when you wish to power up the device and not power up the gsm/cellphone portion of the phone. For example in meetings you migh * Offer a way to easily switch into "Driving mode", e.g. via a button or gesture (user configurable?)

This page details the power management of the Phase 1 Neo1973. Much of it is inapplicable to earlier models. Power management is of utmost concern to any mobile device.

...page provides information on the architecture of the second version of the Neo1973 debug board (the one shipped with the "Advanced" [[Neo 1973]] kits). [[Image:Neo1973 debugboard v2 top annotated.jpg|left|500px|Annotated PCB Photograph]]

...rging logic is embedded into our [[Neo1973 GTA01 Power Management|PCF50606 Power Management]] Unit (PMU). The PCF50606 supports a variety of [[Neo1973 Battery]] charging modes, based around the hardware limitations of USB.

* Power on the Neo. (If it has powered on by itself, that's okay.) === power-off while DFU ===

...e features which some would like to go into future phones similar to the [[Neo1973]]. ...would like, that connect easily to the phone - initially primarily for the Neo1973

Bluetooth is one of the core functions of the Neo1973, however it is basically unimplemented on the software side at the moment. == Power it up ==

# Press and hold the AUX button # Press the Power button until the phone powers on and displays the boot menu

...d like below 240x320 it's work like a charm and to quit just use the power button. =Neo1973=

...age, although it doesn't emulate any of the [[:Category:Neo1973 Hardware | Neo1973 Hardware]] except the very CPU core. Read more in the [[FAQ#Q:_Is_there_an_ ...om Openmoko repositories is also capable of emulating most of the actual [[Neo1973]] (GTA01) hardware, although not all of it. Additionally, Neo FreeRunner em

This page tries to collect some information on how to use your Neo1973 together with a computer running a Microsoft(R) Windows(TM) series operatin ...rs.informatik.uni-halle.de/~rabe/neo/Neo1973.inf ([[Neo1973.inf|Listing of Neo1973.inf]]). If you have Windows Vista x64 try this one: [http://openmoko.kamill

=== Q: Что такое Openmoko и Neo1973? === ...атформу для мобильных телефонов. [[Neo1973/ru|Neo1973]] от [[FIC]] это первый телефон полностью под

==== Power Management ==== The '''gta01_pm_gsm''' driver implements GSM power management (this means, if this is compiled as a module, you have to load t

[[Image:GTA01-U-Boot.JPG|thumb|300px|u-boot menu on Neo1973]] [[Image:Neo1973 uboot splash closeup.jpg|thumb|300px|u-boot splash screen on Neo1973]]

Neo1973的主处理器(CPU)是一个Samsung S3C2410AL-26 (可运行在266 MHz) Neo1973有一个microSD卡的插槽。

...ise übersetzt. Die englische Version dieser Seite findet sich [[:Category:Neo1973 Hardware | hier ]]. Der Hauptprozessor (CPU) im [[Neo1973]] ist ein "Samsung S3C2410AL-26" (Er kann auf bis zu 266MHz getaktet werden