Wishlist/Neo1973 P0 Review

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (Hardware)
Line 20: Line 20:
 
* <tt>dmesg</tt> dump
 
* <tt>dmesg</tt> dump
 
* <tt>pstree -Gupl</tt> output after all standard processes have started
 
* <tt>pstree -Gupl</tt> output after all standard processes have started
 +
 +
==Connecting==
 +
 +
By default Neo1973 has usb0 interface working. Under Linux you need to <tt>modprobe usbnet</tt> and configure usb0 interface:
 +
<pre>
 +
ifconfig usb 192.168.0.200 netmask 255.255.255.0
 +
</pre>
 +
 +
Then <tt>ssh root@192.168.0.202</tt> with empty password to get into phone.
 +
  
 
[[Category:Ideas]]
 
[[Category:Ideas]]

Revision as of 13:59, 7 March 2007

This is a page for those with P0 hardware to share their impressions of the device, and to respond to questions that may be raised about it.

Hardware

Koen (on IRC) provided these pictures. Rwhitby (also IRC) http://www.flickr.com/photos/rwhitby/

Wishlist:

  • microSD read/write speeds with various cards
  • internal NAND read/write speeds
  • raw dump from s3c2410-ts device as you touch (click)/gesture/hold down with fingers/stylus
  • raw dump when doing fake double-touch: one finger down and then tap with second finger or make gesture with second finger
  • some benchmarks
  • lsusb -v & lspci (or whatever ls$busname you have on ARM9 :-) )
  • ATI3 & ATI9 & AT&V output from GSM modem
  • picture of the inside of the front and back cases, with a ruler for scale, also pcb back and front with ruler, to make it easier for people considering building hardware modifications.

Software

Wishlist:

  • dmesg dump
  • pstree -Gupl output after all standard processes have started

Connecting

By default Neo1973 has usb0 interface working. Under Linux you need to modprobe usbnet and configure usb0 interface:

ifconfig usb 192.168.0.200 netmask 255.255.255.0

Then ssh root@192.168.0.202 with empty password to get into phone.

Personal tools

This is a page for those with P0 hardware to share their impressions of the device, and to respond to questions that may be raised about it.

Hardware

Koen (on IRC) provided these pictures. Rwhitby (also IRC) http://www.flickr.com/photos/rwhitby/

Wishlist:

  • microSD read/write speeds with various cards
  • internal NAND read/write speeds
  • raw dump from s3c2410-ts device as you touch (click)/gesture/hold down with fingers/stylus
  • raw dump when doing fake double-touch: one finger down and then tap with second finger or make gesture with second finger
  • some benchmarks
  • lsusb -v & lspci (or whatever ls$busname you have on ARM9 :-) )
  • ATI3 & ATI9 & AT&V output from GSM modem
  • picture of the inside of the front and back cases, with a ruler for scale, also pcb back and front with ruler, to make it easier for people considering building hardware modifications.

Software

Wishlist:

  • dmesg dump
  • pstree -Gupl output after all standard processes have started

Connecting

By default Neo1973 has usb0 interface working. Under Linux you need to modprobe usbnet and configure usb0 interface:

ifconfig usb 192.168.0.200 netmask 255.255.255.0

Then ssh root@192.168.0.202 with empty password to get into phone.