Webcam/zh tw

From Openmoko

Revision as of 07:11, 4 June 2009 by Dolamo0415 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


這篇文章介紹如何將網路攝影機(Webcam)應用到Freerunner上.

網路攝影機這裡使用的是Logitech出版的快看S5500網路攝影機, 使用[UVC]驅動程式.

The method described here is still rather ugly, feel free to improve it.

Make it work on a PC

To be safe, you just first ensure the webcam works on a regular PC, and Linux in particular. This will minimise the problems you are likely to face (though it may not eliminate them altogether). The regular documentation applies:

Add video support to the kernel

The 2.6.24 kernel is provided without video input support enabled. There is a way to add the necessary modules without recompiling everything:

  • download the source code for the kernel:
  1. wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2
  • make sure you have bzip2 and development tools installed:
  1. apt-get install bzip2 gcc make libc6-dev libncurses5-dev
Personal tools


這篇文章介紹如何將網路攝影機(Webcam)應用到Freerunner上.

網路攝影機這裡使用的是Logitech出版的快看S5500網路攝影機, 使用[UVC]驅動程式.

The method described here is still rather ugly, feel free to improve it.

Make it work on a PC

To be safe, you just first ensure the webcam works on a regular PC, and Linux in particular. This will minimise the problems you are likely to face (though it may not eliminate them altogether). The regular documentation applies:

Add video support to the kernel

The 2.6.24 kernel is provided without video input support enabled. There is a way to add the necessary modules without recompiling everything:

  • download the source code for the kernel:
  1. wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2
  • make sure you have bzip2 and development tools installed:
  1. apt-get install bzip2 gcc make libc6-dev libncurses5-dev