WM8753

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(connection summary posted by joerg)
Line 1: Line 1:
 +
* Feature: sound card
 +
* Product Homepage: http://www.wolfsonmicro.com/products/WM8753/
 +
* Data Sheet: [http://www.wolfsonmicro.com/uploads/documents/en/WM8753.pdf WM8753.pdf]
 +
* Driver: https://svn.openmoko.org/trunk/src/target/kernel/patches/asoc.patch
 +
 +
== Neo FreeRunner ==
 +
* Connected to: [[Samsung S3C2442B B54]] IIS interface (PCM data), [[Samsung S3C2442B B54]] I2C (Control)
 +
 +
== Neo 1973 ==
 +
* Connected to: [[Samsung S3C2410AL-26]] IIS interface (PCM data), [[Samsung S3C2410AL-26]] I2C (Control)
 +
 
'''WM8753''' (also the '''Wolfson Codec''') is the "sound card" chip in the [[Neo1973 audio subsystem]]. It has a stereo ADC for recording and a stereo DAC for playback, plus a mono "voice" DAC.
 
'''WM8753''' (also the '''Wolfson Codec''') is the "sound card" chip in the [[Neo1973 audio subsystem]]. It has a stereo ADC for recording and a stereo DAC for playback, plus a mono "voice" DAC.
  
Line 5: Line 16:
 
The following output pins are not connected: LOUT2 and ROUT2, OUT3, OUT4. The following input pins are not connected: LINE1, LINE2.
 
The following output pins are not connected: LOUT2 and ROUT2, OUT3, OUT4. The following input pins are not connected: LINE1, LINE2.
  
== Routing ==
+
=== Routing ===
  
 
http://wolfson.co.uk/uploads/images/en/WM8753_BlockDiagram.gif
 
http://wolfson.co.uk/uploads/images/en/WM8753_BlockDiagram.gif
Line 37: Line 48:
 
  DACDAT, ADCDAT: to cpu via IIS
 
  DACDAT, ADCDAT: to cpu via IIS
  
=== Neo modes ===
+
==== Neo modes ====
  
 
* Off: all off.
 
* Off: all off.
Line 49: Line 60:
 
* Capture Bluetooth: all off.
 
* Capture Bluetooth: all off.
  
== See also ==
+
=== See also ===
  
 
* [[Neo1973 audio subsystem]]
 
* [[Neo1973 audio subsystem]]
 
* [[Neo1973 hardware]]
 
* [[Neo1973 hardware]]
  
== External links ==
+
=== External links ===
  
 
* [http://www.wolfsonmicro.com/products/WM8753/ The Wolfson Microelectronics page about WM8753]
 
* [http://www.wolfsonmicro.com/products/WM8753/ The Wolfson Microelectronics page about WM8753]

Revision as of 21:37, 16 August 2008

Contents

Neo FreeRunner

Neo 1973

WM8753 (also the Wolfson Codec) is the "sound card" chip in the Neo1973 audio subsystem. It has a stereo ADC for recording and a stereo DAC for playback, plus a mono "voice" DAC.

It's connected to the S3C2410 IIS interface for PCM "hi-fi" data, and to the S3C2410 I2C interface for control. The PCM "voice" input and output is connected to the Bluetooth chip. The stereo output ("Audio Out": LOUT1 and ROUT1) is connected to LM4857 stereo input (LIN and RIN) for amplification. MONO1 and MONO2 form "GSM Line Out"; RXP and RXN form "GSM Line In". MIC1 is "Headset Mic", and MIC2 is "Call Mic".

The following output pins are not connected: LOUT2 and ROUT2, OUT3, OUT4. The following input pins are not connected: LINE1, LINE2.

Routing

http://wolfson.co.uk/uploads/images/en/WM8753_BlockDiagram.gif

There are several sources connected via switches that can cut each source out:

  • "Left Mixer Left" and "Right Mixer Right Playback Switch" connect the stereo DAC for stereo mixing.
  • "Mono Mixer Left" and "Mono Mixer Right Playback Switch" connect the stereo DAC for mono mixing.
  • XXX bypass, sidetone, voice
From: Joerg Reisenweber <joerg@openmoko.org>
To: openmoko-devel@lists.openmoko.org
Date: Thu, 12 Jun 2008 15:48:58 +0200

LOUT2/ROUT2 is handset earpiece (aka receiver).
LOUT1/ROUT1 is routing to external amp, which there is switching between
headset-stereo and device-speaker-mono(GTA02)/stereo(GTA01) via
cpu-GPIO[HP_IN]. (what also is a function I expect to see in alsa-driver of
our "OEM-card", but surely NOT in WM8753-alsa-driver)

NC: OUT3 OUT4

MONO1, MONO2: differential output routing to mic analog in of GSM

and while I'm writing...
MIC2,MIC2N: diff. input from handset mic
MIC1,MIC1N: "differential" Input from headset (ring3 jack, MIC1N:GND via 100N)
RXP,RXN: diff. input from GSM analog "earpiece" output
ACOP->AIN via 100N
LINE1, LINE2: to testpoint H-TP3001/2, NC
VXD: digital PCM to BT (mono only?)
DACDAT, ADCDAT: to cpu via IIS

Neo modes

  • Off: all off.
  • GSM Handset: only "Headset Mic" off.
  • GSM Headset: only "Call Mic" off.
  • GSM Bluetooth: only "Line In" and "Line Out" on.
  • Speakers: only "Audio Out" on.
  • Headphones: only "Audio Out" on.
  • Capture Handset: only "Call Mic" on.
  • Capture Headset: only "Headset Mic" on.
  • Capture Bluetooth: all off.

See also

External links

Personal tools

WM8753 (also the Wolfson Codec) is the "sound card" chip in the Neo1973 audio subsystem. It has a stereo ADC for recording and a stereo DAC for playback, plus a mono "voice" DAC.

It's connected to the S3C2410 IIS interface for PCM "hi-fi" data, and to the S3C2410 I2C interface for control. The PCM "voice" input and output is connected to the Bluetooth chip. The stereo output ("Audio Out": LOUT1 and ROUT1) is connected to LM4857 stereo input (LIN and RIN) for amplification. MONO1 and MONO2 form "GSM Line Out"; RXP and RXN form "GSM Line In". MIC1 is "Headset Mic", and MIC2 is "Call Mic".

The following output pins are not connected: LOUT2 and ROUT2, OUT3, OUT4. The following input pins are not connected: LINE1, LINE2.

Routing

http://wolfson.co.uk/uploads/images/en/WM8753_BlockDiagram.gif

There are several sources connected via switches that can cut each source out:

  • "Left Mixer Left" and "Right Mixer Right Playback Switch" connect the stereo DAC for stereo mixing.
  • "Mono Mixer Left" and "Mono Mixer Right Playback Switch" connect the stereo DAC for mono mixing.
  • XXX bypass, sidetone, voice
From: Joerg Reisenweber <joerg@openmoko.org>
To: openmoko-devel@lists.openmoko.org
Date: Thu, 12 Jun 2008 15:48:58 +0200

LOUT2/ROUT2 is handset earpiece (aka receiver).
LOUT1/ROUT1 is routing to external amp, which there is switching between
headset-stereo and device-speaker-mono(GTA02)/stereo(GTA01) via
cpu-GPIO[HP_IN]. (what also is a function I expect to see in alsa-driver of
our "OEM-card", but surely NOT in WM8753-alsa-driver)

NC: OUT3 OUT4

MONO1, MONO2: differential output routing to mic analog in of GSM

and while I'm writing...
MIC2,MIC2N: diff. input from handset mic
MIC1,MIC1N: "differential" Input from headset (ring3 jack, MIC1N:GND via 100N)
RXP,RXN: diff. input from GSM analog "earpiece" output
ACOP->AIN via 100N
LINE1, LINE2: to testpoint H-TP3001/2, NC
VXD: digital PCM to BT (mono only?)
DACDAT, ADCDAT: to cpu via IIS

Neo modes

  • Off: all off.
  • GSM Handset: only "Headset Mic" off.
  • GSM Headset: only "Call Mic" off.
  • GSM Bluetooth: only "Line In" and "Line Out" on.
  • Speakers: only "Audio Out" on.
  • Headphones: only "Audio Out" on.
  • Capture Handset: only "Call Mic" on.
  • Capture Headset: only "Headset Mic" on.
  • Capture Bluetooth: all off.

See also

External links