WM8753

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(voice interface bluetooth info)
(add block diagram)
Line 6: Line 6:
  
 
== Routing ==
 
== Routing ==
 +
 +
http://wolfson.co.uk/uploads/images/en/WM8753_BlockDiagram.gif
  
 
There are several sources connected via switches that can cut each source out:
 
There are several sources connected via switches that can cut each source out:

Revision as of 03:08, 27 November 2007

WM8753 (also the Wolfson Codec) is the "sound card" chip in the Neo1973 audio subsystem. It has a stereo ADC for recording and a stereo DAC for playback, plus a mono "voice" DAC.

It's connected to the S3C2410 IIS interface for PCM "hi-fi" data, and to the S3C2410 I2C interface for control. The PCM "voice" input and output is connected to the Bluetooth chip. The stereo output ("Audio Out": LOUT1 and ROUT1) is connected to LM4857 stereo input (LIN and RIN) for amplification. MONO1 and MONO2 form "GSM Line Out"; RXP and RXN form "GSM Line In". MIC1 is "Headset Mic", and MIC2 is "Call Mic".

The following output pins are not connected: LOUT2 and ROUT2, OUT3, OUT4. The following input pins are not connected: LINE1, LINE2.

Contents

Routing

http://wolfson.co.uk/uploads/images/en/WM8753_BlockDiagram.gif

There are several sources connected via switches that can cut each source out:

  • "Left Mixer Left" and "Right Mixer Right Playback Switch" connect the stereo DAC for stereo mixing.
  • "Mono Mixer Left" and "Mono Mixer Right Playback Switch" connect the stereo DAC for mono mixing.
  • XXX bypass, sidetone, voice

Neo modes

  • Off: all off.
  • GSM Handset: only "Headset Mic" off.
  • GSM Headset: only "Call Mic" off.
  • GSM Bluetooth: only "Line In" and "Line Out" on.
  • Speakers: only "Audio Out" on.
  • Headphones: only "Audio Out" on.
  • Capture Handset: only "Call Mic" on.
  • Capture Headset: only "Headset Mic" on.
  • Capture Bluetooth: all off.

See also

External links

Personal tools

WM8753 (also the Wolfson Codec) is the "sound card" chip in the Neo1973 audio subsystem. It has a stereo ADC for recording and a stereo DAC for playback, plus a mono "voice" DAC.

It's connected to the S3C2410 IIS interface for PCM "hi-fi" data, and to the S3C2410 I2C interface for control. The PCM "voice" input and output is connected to the Bluetooth chip. The stereo output ("Audio Out": LOUT1 and ROUT1) is connected to LM4857 stereo input (LIN and RIN) for amplification. MONO1 and MONO2 form "GSM Line Out"; RXP and RXN form "GSM Line In". MIC1 is "Headset Mic", and MIC2 is "Call Mic".

The following output pins are not connected: LOUT2 and ROUT2, OUT3, OUT4. The following input pins are not connected: LINE1, LINE2.

Routing

There are several sources connected via switches that can cut each source out:

  • "Left Mixer Left" and "Right Mixer Right Playback Switch" connect the stereo DAC for stereo mixing.
  • "Mono Mixer Left" and "Mono Mixer Right Playback Switch" connect the stereo DAC for mono mixing.
  • XXX bypass, sidetone, voice

Neo modes

  • Off: all off.
  • GSM Handset: only "Headset Mic" off.
  • GSM Headset: only "Call Mic" off.
  • GSM Bluetooth: only "Line In" and "Line Out" on.
  • Speakers: only "Audio Out" on.
  • Headphones: only "Audio Out" on.
  • Capture Handset: only "Call Mic" on.
  • Capture Headset: only "Headset Mic" on.
  • Capture Bluetooth: all off.

See also

External links