User:PWerken

From Openmoko

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
'''Peter van de Werken'''
+
== Peter van de Werken ==
 +
 
 +
Currently running debian (squeeze/sid) from µSD with:
 +
* [http://build.shr-project.org/shr-unstable/ SHR unstable] kernel 2.6.32.13-oe3.2+gitr6+a9254be10ac2294ea20165a87c09ea6afcf66d94-r0
 +
* [http://home.a-eskwadraat.nl/~pwerken/debian/ Enlightenment (svn r49003)]
 +
 
 
----
 
----
  
Bought a 2.5mm to 3.5mm converter cable ([http://www.dealextreme.com/details.dx/sku.7127 sku.7127 at dealextreme]).<br/>
+
Bought a 2.5mm to 3.5mm converter cable ([http://www.dealextreme.com/details.dx/sku.7127 sku.7127 at dealextreme]).
 +
<br/>
 
It has the following pin-layout: TRRS: left, right, mic (unconnected), ground
 
It has the following pin-layout: TRRS: left, right, mic (unconnected), ground
 
+
<br/>
 
Unfortunately this is incompatible with the FR which uses [[Headset#Pinout|TRRS: mic, right, left, ground]]
 
Unfortunately this is incompatible with the FR which uses [[Headset#Pinout|TRRS: mic, right, left, ground]]
  
 
----
 
----
  
Currently running 2.6.34-oe4+gitr3 kernel from [http://build.shr-project.org/shr-kms/ shr-kms] on debian (squeeze/sid).
+
=== Useful links ===
 
+
The touchscreen was misconfigured in X (could not reach the corners with the cursor, and also the axes were messed up).<br/>
+
Calibration failed as there's no longer a /sys/.../calibrate. Also the option in the InputDevice section where ignored as udev (157) was already providing the input device.  So I fixed /etc/X11/Xorg.conf by removing the unused inputdevice section and adding:
+
 
+
Section "InputClass"
+
    Identifier              "S3C24XX TouchScreen"
+
    MatchDevicePath        "/dev/input/event1"
+
+
    Option "GrabDevice"    "1"
+
    Option "InvertY"        "1"
+
    Option "Calibration"    "110 920 110 920"
+
    Option "SwapAxes"      "1"
+
EndSection
+
 
+
note: /etc/pointercal doesn't seem to be used anymore
+
 
+
----
+
  
 
* [http://downloads.openmoko.org/developer/schematics/GTA02/component-placement_by_lindi/ Component Placement by Lindi]
 
* [http://downloads.openmoko.org/developer/schematics/GTA02/component-placement_by_lindi/ Component Placement by Lindi]

Revision as of 13:48, 17 July 2010

Peter van de Werken

Currently running debian (squeeze/sid) from µSD with:


Bought a 2.5mm to 3.5mm converter cable (sku.7127 at dealextreme).
It has the following pin-layout: TRRS: left, right, mic (unconnected), ground
Unfortunately this is incompatible with the FR which uses TRRS: mic, right, left, ground


Useful links

Usage:

Screen protector:

Personal tools

Peter van de Werken

Currently running debian (squeeze/sid) from µSD with:


Bought a 2.5mm to 3.5mm converter cable (sku.7127 at dealextreme).
It has the following pin-layout: TRRS: left, right, mic (unconnected), ground
Unfortunately this is incompatible with the FR which uses TRRS: mic, right, left, ground


Useful links

Usage:

Screen protector: