User:Nukama

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(→‎Packages)
Line 1: Line 1:
−
==== Bicycle ====
+
= Software related =
  
−
Dynamo powered openmoko (and other USB-Devices/Host) using the frequency/voltage of the dynamo to gather information about speed and distance.
+
== [[Distributions]] ==
  
−
Wishlist for this USB-Charger:
+
=== [[OpenWrt]] ===
−
* 5V, 500-1500mA output (through diodes or MOSFET)
+
−
* Voltage, Frequency (should be dynamohub independable)
+
−
* USB-Device (maybe with USBprog)
+
  
−
nice to
+
append "arch s3c24xx 1" to /etc/opkg.conf
−
* 3d compass, altimeter, thermometer (with information of distance to map tunnels, dense forest, ...)
+
−
* buttons for turning lights (on lowpower/on highpower/off), setting waypoints/audionotes, easy navigation of openmoko (scrolling/enter)
+
  
−
==== A-GPS ====
+
 
−
agps.sh
+
Useful packages:
 +
opkg install openssh-sftp-server
 +
 
 +
 
 +
=== [[SHR]] ===
 +
 
 +
 
 +
ubi - ubinized for flashing with [[NeoTool]]
 +
 
 +
ubifs - [[UBIFS]]
 +
 
 +
==== Problems  ====
 +
with shr-lite-eglibc-ipk--20100115-om-gta02.rootfs @ uImage-2.6.32.3-oe1+gitr1+5827b20d022fb47ce9c9731d0fb894d361e16ffe-r4-om-gta02.bin booted with qi-ubi-s3c2442-1.0.2-r0+gitr0+c38b062a609f1442e6a9e13005cfbdfd59a5ac0d.udfu
 +
 
 +
*No SIM auth dialog (also in unstable jffs2)
 +
gsm_request_on_start = false
 +
 
 +
maybe restart phonefsod manually? (worked in jffs2-unstable@2.6.2)
 +
 
 +
 
 +
*whitescreen(ofstarving) from resuming and dimming, sometimes the lock-screen appears
 +
 
 +
Workaround: edit /etc/phonefsod.conf
 +
dim_idle_prelock_percent = 3                                       
 +
auto_suspend = never  /maybe normal would work also...                                           
 +
and don't try to suspend your device
 +
 
 +
 
 +
== USB-Networking ==
 +
 
 +
=== [[OpenWrt]] ===
 +
 
 +
/etc/config/network
 
<pre>
 
<pre>
−
agps-alm.py > /dev/ttySAC1
+
config interface lan
 +
option proto static
 +
option ifname eth0
 +
option ipaddr 192.168.0.202
 +
option netmask 255.255.255.0
 +
option gateway 192.168.0.200
 +
option dns 208.67.222.222
 
</pre>
 
</pre>
  
−
agps-alm.py
+
Without modifying the /etc/config/network
 
<pre>
 
<pre>
−
#!/usr/bin/python
+
sudo iptables -I INPUT 1 -s 192.168.1.1 -j ACCEPT
−
#
+
sudo iptables -I OUTPUT 1 -s 192.168.1.2 -j ACCEPT
−
# ublox AssistNow Online almanac downloader for Neo FreeRunner
+
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.1.0/24
−
#
+
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
−
# v0.1
+
</pre>
−
#
+
−
# Wilfried Klaebe <wk-openmoko@chaos.in-kiel.de>
+
−
#
+
−
# Usage:
+
−
#
+
−
# agps-alm.py > /dev/ttySAC1
+
−
#
+
  
−
import sys
+
=== Ubuntu 9.10 ===
−
import socket
+
<pre>
−
import re
+
sudo iptables -I INPUT 1 -s 192.168.0.202 -j ACCEPT
 +
sudo iptables -I OUTPUT 1 -s 192.168.0.200 -j ACCEPT
 +
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
 +
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
 +
</pre>
  
−
user='your@mail.address'
 
−
pwd='pwdfromublox'
 
  
−
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
 
−
s.connect(('agps.u-blox.com',46434))
 
  
−
s.send('user='+user+';pwd='+pwd+';cmd=alm;lat=0;lon=0;pacc=40000000;\n')
+
== Packages ==
  
−
buf = s.recv(4096)
+
<pre>
−
while True:
+
ffalarms
−
        b = s.recv(4096)
+
dates
−
        if not b:
+
openssh-sftp-server
−
                break
+
tangogps
−
        buf += b
+
navit
−
 
+
zinnia
−
h = {}
+
zinnia-tomoe-zh
−
 
+
enscribi
−
while True:
+
ttf-arphic-uming
−
        (l,s,buf) = buf.partition('\n')
+
elementary-sms?
−
        l = l.rstrip('\r\n')
+
elementary-alarm?
−
        #
+
intone
−
        sys.stderr.write(l+'\n')
+
intone-video
−
        #
+
browser
−
        if l == "":
+
−
                if 'content-length' in h and h['content-length'].isdigit() and 'content-type' in h and h['content-type'] == 'application/ubx':
+
−
                        sys.stdout.write(buf[:int(h['content-length'])])
+
−
                sys.exit(0)
+
−
        #
+
−
        m = re.search('\\A(.+): (.+)\\Z',l)
+
−
        if m:
+
−
                h[m.group(1).lower()] = m.group(2).lower();
+
 
</pre>
 
</pre>
  
−
 
+
=== Enscribi on OM2009 ===
−
==== Enscribi on OM2009 ====
+
  
 
Step 1:
 
Step 1:
Line 122: Line 139:
 
   opkg install task-fonts-truetype-chinese
 
   opkg install task-fonts-truetype-chinese
  
−
==== OpenWrt ====
+
http://trac.shr-project.org/trac/ticket/868
  
−
append "arch s3c24xx 1" to /etc/opkg.conf
 
  
−
 
+
== other tricks ==
−
Useful packages:
+
=== A-GPS ===
−
opkg install openssh-sftp-server
+
agps.sh
−
 
+
−
==== USB-Networking ====
+
−
 
+
−
===== OpenWrt =====
+
−
 
+
−
/etc/config/network
+
 
<pre>
 
<pre>
−
config interface lan
+
agps-alm.py > /dev/ttySAC1
−
option proto static
+
−
option ifname eth0
+
−
option ipaddr 192.168.0.1
+
−
option netmask 255.255.255.0
+
−
option gateway 192.168.0.2
+
−
option dns 208.67.222.222
+
 
</pre>
 
</pre>
  
 +
agps-alm.py
 
<pre>
 
<pre>
−
sudo iptables -I INPUT 1 -s 192.168.1.1 -j ACCEPT
+
#!/usr/bin/python
−
sudo iptables -I OUTPUT 1 -s 192.168.1.2 -j ACCEPT
+
−
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.1.0/24
+
−
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
+
−
</pre>
+
−
 
+
−
===== Ubuntu 9.10 =====
+
−
<pre>
+
−
sudo iptables -I INPUT 1 -s 192.168.0.1 -j ACCEPT
+
−
sudo iptables -I OUTPUT 1 -s 192.168.0.2 -j ACCEPT
+
−
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
+
−
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
+
−
</pre>
+
−
 
+
−
 
+
−
===== Ubuntu 8.10 =====
+
−
<pre>
+
−
sudo iptables -I INPUT 1 -s 192.168.0.202 -j ACCEPT
+
−
sudo iptables -I OUTPUT 1 -s 192.168.0.200 -j ACCEPT
+
−
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
+
−
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
+
−
</pre>
+
−
 
+
−
===== Ubuntu 9.04 =====
+
−
/etc/network/freerunner (chmod -x)
+
−
<pre>
+
−
#!/bin/sh
+
 
#
 
#
−
# configures the freerunner for internet
+
# ublox AssistNow Online almanac downloader for Neo FreeRunner
 
#
 
#
 +
# v0.1
 +
#
 +
# Wilfried Klaebe <wk-openmoko@chaos.in-kiel.de>
 +
#
 +
# Usage:
 +
#
 +
# agps-alm.py > /dev/ttySAC1
 
#
 
#
  
−
DEVICE=usb0
+
import sys
−
IPADDR=192.168.0.200
+
import socket
−
REMOTE_IPADDR=192.168.0.202
+
import re
−
NETMASK=255.255.255.0
+
  
−
# get first ip for dns
+
user='your@mail.address'
−
DNSIP=$(awk '$1 == "nameserver"{print $2; exit(0);}' /etc/resolv.conf)
+
pwd='pwdfromublox'
  
−
case "$1" in
+
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
−
start)
+
s.connect(('agps.u-blox.com',46434))
−
iptables -A POSTROUTING -t nat -j MASQUERADE -s $REMOTE_IPADDR
+
−
iptables -A PREROUTING -t nat -p tcp -s $REMOTE_IPADDR -d $IPADDR --dport domain -j DNAT --to-destination $DNSIP
+
−
iptables -A PREROUTING -t nat -p udp -s $REMOTE_IPADDR -d $IPADDR --dport domain -j DNAT --to-destination $DNSIP
+
  
−
if [ "$(cat /proc/sys/net/ipv4/ip_forward)" = "0" ]; then
+
s.send('user='+user+';pwd='+pwd+';cmd=alm;lat=0;lon=0;pacc=40000000;\n')
−
echo "temoprarely allow ip_forward for openmoko" > /var/run/openmoko.ip_forward
+
−
echo 1 > /proc/sys/net/ipv4/ip_forward
+
−
fi
+
−
;;
+
−
stop)
+
−
iptables -D POSTROUTING -t nat -j MASQUERADE -s $REMOTE_IPADDR
+
−
iptables -D PREROUTING -t nat -p tcp -s $REMOTE_IPADDR -d $IPADDR --dport domain -j DNAT --to-destination $DNSIP
+
−
iptables -D PREROUTING -t nat -p udp -s $REMOTE_IPADDR -d  $IPADDR --dport domain -j DNAT --to-destination $DNSIP
+
  
−
if [ -f /var/run/openmoko.ip_forward ]; then
+
buf = s.recv(4096)
−
rm /var/run/openmoko.ip_forward
+
while True:
−
echo 0 > /proc/sys/net/ipv4/ip_forward
+
        b = s.recv(4096)
−
fi
+
        if not b:
−
;;
+
                break
−
esac
+
        buf += b
  
−
</pre>
+
h = {}
  
−
/etc/udev/rules.d/80-freerunner.rules
+
while True:
−
<pre>
+
        (l,s,buf) = buf.partition('\n')
−
# This file causes programs to be run on device insertion.
+
        l = l.rstrip('\r\n')
−
# See udev(7) for syntax.
+
        #
−
# rule to assign a fixed mac address specified in /
+
        sys.stderr.write(l+'\n')
−
KERNEL=="usb[0-9]*", DRIVERS=="cdc_ether", ACTION=="add", RUN+="/usr/local/sbin/freerunner-usb-add.sh %k"
+
        #
 +
        if l == "":
 +
                if 'content-length' in h and h['content-length'].isdigit() and 'content-type' in h and h['content-type'] == 'application/ubx':
 +
                        sys.stdout.write(buf[:int(h['content-length'])])
 +
                sys.exit(0)
 +
        #
 +
        m = re.search('\\A(.+): (.+)\\Z',l)
 +
        if m:
 +
                h[m.group(1).lower()] = m.group(2).lower();
 
</pre>
 
</pre>
  
−
/usr/local/sbin/freerunner-usb-add.sh  (chmod -x)
 
−
<pre>
 
−
#!/bin/sh
 
−
(
 
−
ip address add 192.168.0.200/26 netmask dev usb0 > /dev/null
 
−
ip link set usb0 up > /dev/null
 
−
/etc/network/freerunner start
 
−
) &
 
−
exit 0
 
−
</pre>
 
  
 +
= Hardware related =
 +
== Bicycle ==
  
−
==== Packages ====
+
Dynamo powered openmoko (and other USB-Devices/Host) using the frequency/voltage of the dynamo to gather information about speed and distance.
  
−
<pre>
+
Wishlist for this USB-Charger:
−
ffalarms
+
* 5V, 500-1500mA output (through diodes or MOSFET)
−
dates
+
* Voltage, Frequency (should be dynamohub independable)
−
openssh-sftp-server
+
* USB-Device (maybe with USBprog)
−
tangogps
+
 
−
navit
+
nice to
−
zinnia
+
* 3d compass, altimeter, thermometer (with information of distance to map tunnels, dense forest, ...)
−
zinnia-tomoe-zh
+
* buttons for turning lights (on lowpower/on highpower/off), setting waypoints/audionotes, easy navigation of openmoko (scrolling/enter)
−
enscribi
+
−
ttf-arphic-uming
+
−
elementary-sms?
+
−
elementary-alarm?
+
−
intone
+
−
intone-video
+
−
</pre>
+

Revision as of 17:58, 19 January 2010

Contents

Software related

Distributions

OpenWrt

append "arch s3c24xx 1" to /etc/opkg.conf


Useful packages: 

opkg install openssh-sftp-server


SHR

ubi - ubinized for flashing with NeoTool

ubifs - UBIFS

Problems

with shr-lite-eglibc-ipk--20100115-om-gta02.rootfs @ uImage-2.6.32.3-oe1+gitr1+5827b20d022fb47ce9c9731d0fb894d361e16ffe-r4-om-gta02.bin booted with qi-ubi-s3c2442-1.0.2-r0+gitr0+c38b062a609f1442e6a9e13005cfbdfd59a5ac0d.udfu

  • No SIM auth dialog (also in unstable jffs2)

gsm_request_on_start = false

maybe restart phonefsod manually? (worked in jffs2-unstable@2.6.2)


  • whitescreen(ofstarving) from resuming and dimming, sometimes the lock-screen appears

Workaround: edit /etc/phonefsod.conf dim_idle_prelock_percent = 3 auto_suspend = never /maybe normal would work also... and don't try to suspend your device


USB-Networking

OpenWrt

/etc/config/network 

config interface lan
option proto static
option ifname eth0
option ipaddr 192.168.0.202
option netmask 255.255.255.0
option gateway 192.168.0.200
option dns 208.67.222.222

Without modifying the /etc/config/network 

sudo iptables -I INPUT 1 -s 192.168.1.1 -j ACCEPT
sudo iptables -I OUTPUT 1 -s 192.168.1.2 -j ACCEPT
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.1.0/24
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'

Ubuntu 9.10 

sudo iptables -I INPUT 1 -s 192.168.0.202 -j ACCEPT
sudo iptables -I OUTPUT 1 -s 192.168.0.200 -j ACCEPT
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'


Packages 

ffalarms
dates
openssh-sftp-server
tangogps
navit
zinnia
zinnia-tomoe-zh
enscribi
ttf-arphic-uming
elementary-sms?
elementary-alarm?
intone
intone-video
browser

Enscribi on OM2009

Step 1: 

opkg install http://www.opkg.org/packages/zinnia_0.04_armv4t.ipk
opkg install http://www.opkg.org/packages/0_zinnia-tomoe-ja_0.6.0-20080911_armv4t.ipk (for Japanese support)
opkg install http://www.opkg.org/packages/0_zinnia-tomoe-zh_0.6.0-20080911_armv4t.ipk (for Chinese support)
opkg install http://www.opkg.org/packages/enscribi_0.2.0_armv4t.ipk


Step 2:

Create symbolic links for the old libs (tested with om2009-unstable 17-Aug-2009 17:19) If enscribi is linked against the new libs then these symbolic links are obsolete. 

ln -s /usr/lib/libecore_evas-ver-svn-02.so.0 libecore_evas-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_fb-ver-svn-02.so.0 libecore_fb-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_x-ver-svn-02.so.0 libecore_x-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_input-ver-svn-02.so.0 libecore_input-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_x-ver-svn-02.so.0 libecore_txt-ver-pre-svn-01.so.0
ln -s /usr/lib/libedje-ver-svn-02.so.0 libedje-ver-pre-svn-01.so.0 
ln -s /usr/lib/libembryo-ver-svn-02.so.0 libembryo-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_job-ver-svn-02.so.0 libecore_job-ver-pre-svn-01.so.0
ln -s /usr/lib/libevas-ver-svn-02.so.0 libevas-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore-ver-svn-02.so.0 libecore-ver-pre-svn-01.so.0
ln -s /usr/lib/libeina-ver-svn-02.so.0 libeina-ver-pre-svn-01.so.0

Maybe link the old libs against the even older libs. But seems not to work. 

cd /usr/lib
cp /location-of-old-libs-for-enscribi/* .
ln -s /usr/lib/libecore_evas-ver-svn-02.so.0.9.9 libecore_evas-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_fb-ver-svn-02.so.0.9.9 libecore_fb-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_input-ver-svn-02.so.0.9.9 libecore_input-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_job-ver-svn-02.so.0.9.9 libecore_job-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore-ver-svn-02.so.0.9.9 libecore-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_x-ver-svn-02.so.0.9.9 libecore_x-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_x-ver-svn-02.so.0.9.9 libecore_txt-ver-pre-svn-01.so.0
ln -s /usr/lib/libedje-ver-svn-02.so.0.9.92 libedje-ver-pre-svn-01.so.0 
ln -s /usr/lib/libeina-ver-svn-02.so.0.0.2 libeina-ver-pre-svn-01.so.0
ln -s /usr/lib/libembryo-ver-svn-02.so.0.9.9 libembryo-ver-pre-svn-01.so.0
ln -s /usr/lib/libevas-ver-svn-02.so.0.9.9 libevas-ver-pre-svn-01.so.0

Step 3: 

goto "setup" --> "keyboard" --> "enscribi"

To get a Chinese/Japanese input method. Ensure, that you have Chinese/Japanes fonts installed. 

 opkg install task-fonts-truetype-chinese

http://trac.shr-project.org/trac/ticket/868


other tricks

A-GPS

agps.sh 

agps-alm.py > /dev/ttySAC1

agps-alm.py 

#!/usr/bin/python
#
# ublox AssistNow Online almanac downloader for Neo FreeRunner
#
# v0.1
#
# Wilfried Klaebe <wk-openmoko@chaos.in-kiel.de>
#
# Usage:
#
# agps-alm.py > /dev/ttySAC1
#

import sys
import socket
import re

user='your@mail.address'
pwd='pwdfromublox'

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect(('agps.u-blox.com',46434))

s.send('user='+user+';pwd='+pwd+';cmd=alm;lat=0;lon=0;pacc=40000000;\n')

buf = s.recv(4096)
while True:
        b = s.recv(4096)
        if not b:
                break
        buf += b

h = {}

while True:
        (l,s,buf) = buf.partition('\n')
        l = l.rstrip('\r\n')
        #
        sys.stderr.write(l+'\n')
        #
        if l == "":
                if 'content-length' in h and h['content-length'].isdigit() and 'content-type' in h and h['content-type'] == 'application/ubx':
                        sys.stdout.write(buf[:int(h['content-length'])])
                sys.exit(0)
        #
        m = re.search('\\A(.+): (.+)\\Z',l)
        if m:
                h[m.group(1).lower()] = m.group(2).lower();


Hardware related

Bicycle

Dynamo powered openmoko (and other USB-Devices/Host) using the frequency/voltage of the dynamo to gather information about speed and distance.

Wishlist for this USB-Charger:

  • 5V, 500-1500mA output (through diodes or MOSFET)
  • Voltage, Frequency (should be dynamohub independable)
  • USB-Device (maybe with USBprog)

nice to

  • 3d compass, altimeter, thermometer (with information of distance to map tunnels, dense forest, ...)
  • buttons for turning lights (on lowpower/on highpower/off), setting waypoints/audionotes, easy navigation of openmoko (scrolling/enter)
Retrieved from "http://wiki.openmoko.org/index.php?title=User:Nukama&oldid=79116"
Personal tools

Bicycle

Dynamo powered openmoko (and other USB-Devices/Host) using the frequency/voltage of the dynamo to gather information about speed and distance.

Wishlist for this USB-Charger:

  • 5V, 500-1500mA output (through diodes or MOSFET)
  • Voltage, Frequency (should be dynamohub independable)
  • USB-Device (maybe with USBprog)

nice to

  • 3d compass, altimeter, thermometer (with information of distance to map tunnels, dense forest, ...)
  • buttons for turning lights (on lowpower/on highpower/off), setting waypoints/audionotes, easy navigation of openmoko (scrolling/enter)

A-GPS

agps.sh 

agps-alm.py > /dev/ttySAC1

agps-alm.py 

#!/usr/bin/python
#
# ublox AssistNow Online almanac downloader for Neo FreeRunner
#
# v0.1
#
# Wilfried Klaebe <wk-openmoko@chaos.in-kiel.de>
#
# Usage:
#
# agps-alm.py > /dev/ttySAC1
#

import sys
import socket
import re

user='your@mail.address'
pwd='pwdfromublox'

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect(('agps.u-blox.com',46434))

s.send('user='+user+';pwd='+pwd+';cmd=alm;lat=0;lon=0;pacc=40000000;\n')

buf = s.recv(4096)
while True:
        b = s.recv(4096)
        if not b:
                break
        buf += b

h = {}

while True:
        (l,s,buf) = buf.partition('\n')
        l = l.rstrip('\r\n')
        #
        sys.stderr.write(l+'\n')
        #
        if l == "":
                if 'content-length' in h and h['content-length'].isdigit() and 'content-type' in h and h['content-type'] == 'application/ubx':
                        sys.stdout.write(buf[:int(h['content-length'])])
                sys.exit(0)
        #
        m = re.search('\\A(.+): (.+)\\Z',l)
        if m:
                h[m.group(1).lower()] = m.group(2).lower();


Enscribi on OM2009

Step 1: 

opkg install http://www.opkg.org/packages/zinnia_0.04_armv4t.ipk
opkg install http://www.opkg.org/packages/0_zinnia-tomoe-ja_0.6.0-20080911_armv4t.ipk (for Japanese support)
opkg install http://www.opkg.org/packages/0_zinnia-tomoe-zh_0.6.0-20080911_armv4t.ipk (for Chinese support)
opkg install http://www.opkg.org/packages/enscribi_0.2.0_armv4t.ipk


Step 2:

Create symbolic links for the old libs (tested with om2009-unstable 17-Aug-2009 17:19) If enscribi is linked against the new libs then these symbolic links are obsolete. 

ln -s /usr/lib/libecore_evas-ver-svn-02.so.0 libecore_evas-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_fb-ver-svn-02.so.0 libecore_fb-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_x-ver-svn-02.so.0 libecore_x-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_input-ver-svn-02.so.0 libecore_input-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_x-ver-svn-02.so.0 libecore_txt-ver-pre-svn-01.so.0
ln -s /usr/lib/libedje-ver-svn-02.so.0 libedje-ver-pre-svn-01.so.0 
ln -s /usr/lib/libembryo-ver-svn-02.so.0 libembryo-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_job-ver-svn-02.so.0 libecore_job-ver-pre-svn-01.so.0
ln -s /usr/lib/libevas-ver-svn-02.so.0 libevas-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore-ver-svn-02.so.0 libecore-ver-pre-svn-01.so.0
ln -s /usr/lib/libeina-ver-svn-02.so.0 libeina-ver-pre-svn-01.so.0

Maybe link the old libs against the even older libs. But seems not to work. 

cd /usr/lib
cp /location-of-old-libs-for-enscribi/* .
ln -s /usr/lib/libecore_evas-ver-svn-02.so.0.9.9 libecore_evas-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_fb-ver-svn-02.so.0.9.9 libecore_fb-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_input-ver-svn-02.so.0.9.9 libecore_input-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_job-ver-svn-02.so.0.9.9 libecore_job-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore-ver-svn-02.so.0.9.9 libecore-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_x-ver-svn-02.so.0.9.9 libecore_x-ver-pre-svn-01.so.0
ln -s /usr/lib/libecore_x-ver-svn-02.so.0.9.9 libecore_txt-ver-pre-svn-01.so.0
ln -s /usr/lib/libedje-ver-svn-02.so.0.9.92 libedje-ver-pre-svn-01.so.0 
ln -s /usr/lib/libeina-ver-svn-02.so.0.0.2 libeina-ver-pre-svn-01.so.0
ln -s /usr/lib/libembryo-ver-svn-02.so.0.9.9 libembryo-ver-pre-svn-01.so.0
ln -s /usr/lib/libevas-ver-svn-02.so.0.9.9 libevas-ver-pre-svn-01.so.0

Step 3: 

goto "setup" --> "keyboard" --> "enscribi"

To get a Chinese/Japanese input method. Ensure, that you have Chinese/Japanes fonts installed. 

 opkg install task-fonts-truetype-chinese

OpenWrt

append "arch s3c24xx 1" to /etc/opkg.conf


Useful packages: 

opkg install openssh-sftp-server

USB-Networking

OpenWrt

/etc/config/network 

config interface lan
option proto static
option ifname eth0
option ipaddr 192.168.0.1
option netmask 255.255.255.0
option gateway 192.168.0.2
option dns 208.67.222.222

sudo iptables -I INPUT 1 -s 192.168.1.1 -j ACCEPT
sudo iptables -I OUTPUT 1 -s 192.168.1.2 -j ACCEPT
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.1.0/24
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
Ubuntu 9.10 
sudo iptables -I INPUT 1 -s 192.168.0.1 -j ACCEPT
sudo iptables -I OUTPUT 1 -s 192.168.0.2 -j ACCEPT
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'


Ubuntu 8.10 
sudo iptables -I INPUT 1 -s 192.168.0.202 -j ACCEPT
sudo iptables -I OUTPUT 1 -s 192.168.0.200 -j ACCEPT
sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
Ubuntu 9.04

/etc/network/freerunner (chmod -x) 

#!/bin/sh
#
# configures the freerunner for internet
#
#

DEVICE=usb0
IPADDR=192.168.0.200
REMOTE_IPADDR=192.168.0.202
NETMASK=255.255.255.0

# get first ip for dns
DNSIP=$(awk '$1 == "nameserver"{print $2; exit(0);}' /etc/resolv.conf)

case "$1" in
start)
iptables -A POSTROUTING -t nat -j MASQUERADE -s $REMOTE_IPADDR
iptables -A PREROUTING -t nat -p tcp -s $REMOTE_IPADDR -d $IPADDR --dport domain -j DNAT --to-destination $DNSIP
iptables -A PREROUTING -t nat -p udp -s $REMOTE_IPADDR -d $IPADDR --dport domain -j DNAT --to-destination $DNSIP

if [ "$(cat /proc/sys/net/ipv4/ip_forward)" = "0" ]; then
echo "temoprarely allow ip_forward for openmoko" > /var/run/openmoko.ip_forward
echo 1 > /proc/sys/net/ipv4/ip_forward
fi
;;
stop)
iptables -D POSTROUTING -t nat -j MASQUERADE -s $REMOTE_IPADDR
iptables -D PREROUTING -t nat -p tcp -s $REMOTE_IPADDR -d $IPADDR --dport domain -j DNAT --to-destination $DNSIP
iptables -D PREROUTING -t nat -p udp -s $REMOTE_IPADDR -d  $IPADDR --dport domain -j DNAT --to-destination $DNSIP

if [ -f /var/run/openmoko.ip_forward ]; then
rm /var/run/openmoko.ip_forward
echo 0 > /proc/sys/net/ipv4/ip_forward
fi
;;
esac

/etc/udev/rules.d/80-freerunner.rules 

# This file causes programs to be run on device insertion.
# See udev(7) for syntax.
# rule to assign a fixed mac address specified in /
KERNEL=="usb[0-9]*", DRIVERS=="cdc_ether", ACTION=="add", RUN+="/usr/local/sbin/freerunner-usb-add.sh %k"

/usr/local/sbin/freerunner-usb-add.sh (chmod -x) 

#!/bin/sh
(
ip address add 192.168.0.200/26 netmask dev usb0 > /dev/null
ip link set usb0 up > /dev/null
/etc/network/freerunner start
) &
exit 0


Packages 

ffalarms
dates
openssh-sftp-server
tangogps
navit
zinnia
zinnia-tomoe-zh
enscribi
ttf-arphic-uming
elementary-sms?
elementary-alarm?
intone
intone-video