User:Khiraly

From Openmoko

Revision as of 20:50, 30 August 2009 by Khiraly (Talk | contribs)

Jump to: navigation, search

This is my personal page.

Contents

First time installation

I installed a second Freerunner, and I collect here the necessary steps, to install a distro on it.

  1. Installing Qi
  2. Installing SHR to NAND
  3. Checking if I have the latest GSM firmware (calypso firmware: moko11)
  4. Installing SHR/OM2009 to the SD card

Installing Qi

The best to use openmoko experimental for qi. I used qi-s3c2442-1.0.2+gitr243+36bb5c03756268ff15b2d95a043ffb39a919ce5c.udfu as of 2009-08-30.

Installation Please refer to Qi page, if you want to digg more.

  1. Check if 'dfu-util' is installed on your computer, if not install it. (I use ubuntu here)
 apt-get install dfu-util
  1. Connect an USB cable and turn off the Neo Freerunner
  2. Turn on the Neo by pressing AUX and POWER button at the same time until NOR uboot menu does not appear.
NOTE: if you dont press AUX for 30 sec, the Freerunner will automatically switch off (repower it the with the same method)


  1. Issue the following command as root:
 sudo bash
 dfu-util -a u-boot -R -D qi-s3c2442-1.0.2+gitr243+36bb5c03756268ff15b2d95a043ffb39a919ce5c.udfu 

the output is something like:

root@lamagep:~/Asztal/down/openmoko/qi# dfu-util -a u-boot -R -D  qi-s3c2442-1.0.2+gitr243+36bb5c03756268ff15b2d95a043ffb39a919ce5c.udfu 
dfu-util - (C) 2007-2008 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY
.
Opening USB Device 0x0000:0x0000...
Claiming USB DFU Runtime Interface...
Determining device status: state = appIDLE, status = 0
Device really in Runtime Mode, send DFU detach request...
Resetting USB...
Opening USB Device...
Found Runtime: [0x1d50:0x5119] devnum=20, cfg=0, intf=0, alt=1, name="u-boot"
Claiming USB DFU Interface...
Setting Alternate Setting ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
Transfer Size = 0x1000
bytes_per_hash=571
Starting download: [##################################################] finished!
state(2) = dfuIDLE, status(0) = No error condition is present
Done!
Resetting USB to switch back to runtime mode
root@lamagep:~/Asztal/down/openmoko/qi#

Installing SHR to NAND

Having a working distrib in the NAND means, that you can use your freerunner as a uSD card reader, and install the newest distribs to uSD card.

NOTE: Using you phone from NAND is not as fast as booting directly from uSD card. So I recommend to use your phone from uSD card on daily basis


  1. Get the relevant sources
    1. kernel uImage: http://build.shr-project.org/shr-unstable/images/om-gta02/uImage-2.6.29-oe11+gitr119838+2d158aae9d8d36f575504f59884ed8e80802efe2-r3.5-om-gta02.bin
    2. root fs for NAND: http://shr.bearstech.com/shr-unstable/images/om-gta02/shr-lite-glibc-ipk--20090808-om-gta02.rootfs.jffs2
    3. root fs for uSD: http://build.shr-project.org/shr-unstable/images/om-gta02/shr-lite-glibc-ipk--20090808-om-gta02.rootfs.tar.gz
  1. Install xxx

Elementary related

Paroli related

These are some paroli related links.

Personal tools

This is my personal page.

First time installation

I installed a second Freerunner, and I collect here the necessary steps, to install a distro on it.

  1. Installing Qi
  2. Installing SHR to NAND
  3. Checking if I have the latest GSM firmware (calypso firmware: moko11)
  4. Installing SHR/OM2009 to the SD card

Installing Qi

The best to use openmoko experimental for qi. I used qi-s3c2442-1.0.2+gitr243+36bb5c03756268ff15b2d95a043ffb39a919ce5c.udfu as of 2009-08-30.

Installation Please refer to Qi page, if you want to digg more.

  1. Check if 'dfu-util' is installed on your computer, if not install it. (I use ubuntu here)
 apt-get install dfu-util
  1. Connect an USB cable and turn off the Neo Freerunner
  2. Turn on the Neo by pressing AUX and POWER button at the same time until NOR uboot menu does not appear.
NOTE: if you dont press AUX for 30 sec, the Freerunner will automatically switch off (repower it the with the same method)


  1. Issue the following command as root:
 sudo bash
 dfu-util -a u-boot -R -D qi-s3c2442-1.0.2+gitr243+36bb5c03756268ff15b2d95a043ffb39a919ce5c.udfu 

the output is something like:

root@lamagep:~/Asztal/down/openmoko/qi# dfu-util -a u-boot -R -D  qi-s3c2442-1.0.2+gitr243+36bb5c03756268ff15b2d95a043ffb39a919ce5c.udfu 
dfu-util - (C) 2007-2008 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY
.
Opening USB Device 0x0000:0x0000...
Claiming USB DFU Runtime Interface...
Determining device status: state = appIDLE, status = 0
Device really in Runtime Mode, send DFU detach request...
Resetting USB...
Opening USB Device...
Found Runtime: [0x1d50:0x5119] devnum=20, cfg=0, intf=0, alt=1, name="u-boot"
Claiming USB DFU Interface...
Setting Alternate Setting ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
Transfer Size = 0x1000
bytes_per_hash=571
Starting download: [##################################################] finished!
state(2) = dfuIDLE, status(0) = No error condition is present
Done!
Resetting USB to switch back to runtime mode
root@lamagep:~/Asztal/down/openmoko/qi#

Installing SHR to NAND

Having a working distrib in the NAND means, that you can use your freerunner as a uSD card reader, and install the newest distribs to uSD card.

NOTE: Using you phone from NAND is not as fast as booting directly from uSD card. So I recommend to use your phone from uSD card on daily basis


  1. Get the relevant sources
    1. kernel uImage: http://build.shr-project.org/shr-unstable/images/om-gta02/uImage-2.6.29-oe11+gitr119838+2d158aae9d8d36f575504f59884ed8e80802efe2-r3.5-om-gta02.bin
    2. root fs for NAND: http://shr.bearstech.com/shr-unstable/images/om-gta02/shr-lite-glibc-ipk--20090808-om-gta02.rootfs.jffs2
    3. root fs for uSD: http://build.shr-project.org/shr-unstable/images/om-gta02/shr-lite-glibc-ipk--20090808-om-gta02.rootfs.tar.gz
  1. Install xxx

Elementary related

Paroli related

These are some paroli related links.