User:Kestas

From Openmoko

Revision as of 01:52, 21 February 2010 by Kestas (Talk | contribs)

Jump to: navigation, search

Random notes...

Status

QtMoko

  • u-boot-gta02v5-1.3.1+gitr650149a53dbdd48bf6dfef90930c8ab182adb512-r1.bin
  • uImage-v19-nodebug.bin
  • qtmoko-debian-v19.jffs2

Issues

Neo dosn't wake up on alarm
RTC is not updated to system time
# hwclock --show
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
# fuser /dev/rtc0
/dev/rtc0:            3269
# ps -fp 3269
UID        PID  PPID  C STIME TTY          TIME CMD
root      3269     1  0 01:56 ?        00:00:00 atd /var/spool/at
# kill 3269
# hwclock --show                                       
Sat Jan  1 08:35:07 2000  -0.142318 seconds
# hwclock --systohc
# hwclock --show
Sun Feb 21 01:35:55 2010  -0.137826 seconds
# . /opt/qtmoko/qpe.env
# atd /var/spool/at
No messages received after dealing operator service codes ( like *113# )
update GSM firmware to moko11 ( GSM/Flashing )
Stop log daemons (until next reboot)
# /etc/init.d/klogd stop
# /etc/init.d/sysklogd stop
Enable AtChat logging (AT commands log)
edit /opt/qtmoko/etc/default/Trolltech/Log.conf, set Enabled=1 in AtChat section
restart QtMoko
# tail -f /var/log/messages
Personal tools

Random notes...

Status

QtMoko

  • u-boot-gta02v5-1.3.1+gitr650149a53dbdd48bf6dfef90930c8ab182adb512-r1.bin
  • uImage-v19-nodebug.bin
  • qtmoko-debian-v19.jffs2

Issues

Neo dosn't wake up on alarm
RTC is not updated to system time
# hwclock --show
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
# fuser /dev/rtc0
/dev/rtc0:            3269
# ps -fp 3269
UID        PID  PPID  C STIME TTY          TIME CMD
root      3269     1  0 01:56 ?        00:00:00 atd /var/spool/at
# kill 3269
# hwclock --show                                       
Sat Jan  1 08:35:07 2000  -0.142318 seconds
# hwclock --systohc
# hwclock --show
Sun Feb 21 01:35:55 2010  -0.137826 seconds
# . /opt/qtmoko/qpe.env
# atd /var/spool/at
No messages received after dealing operator service codes ( like *113# )
update GSM firmware to moko11 ( GSM/Flashing )
Stop log daemons (until next reboot)
# /etc/init.d/klogd stop
# /etc/init.d/sysklogd stop
Enable AtChat logging (AT commands log)
edit /opt/qtmoko/etc/default/Trolltech/Log.conf, set Enabled=1 in AtChat section
restart QtMoko
# tail -f /var/log/messages