User:Herp

From Openmoko

(Difference between revisions)
Jump to: navigation, search
 
(11 intermediate revisions by one user not shown)
Line 3: Line 3:
 
Depending on the recording source, Mic1 for headset or Mic2 for handset have to be set accordingly via the Mic Selection Mux, which is alsa control number 53. Also, set Capture Left Mux and Capture Right Mux (65, 64) to PGA.
 
Depending on the recording source, Mic1 for headset or Mic2 for handset have to be set accordingly via the Mic Selection Mux, which is alsa control number 53. Also, set Capture Left Mux and Capture Right Mux (65, 64) to PGA.
  
Below is an alsa state file, which can be used to put the device into voice recording mode. It's advisable to have a programm connected to e.g. /dev/dsp, else the device might crash.
+
Below is an alsa state file, which can be used to put the device into voice recording mode. It's advisable to have a programm connected to e.g. /dev/dsp, else the device might crash. Change settings via:
  
<code>
+
  alsactl -f voice-recording.state restore
  
[[Image:Example.jpg]]
+
http://wildsau.enemy.org/~moko/voice-recording.state
 
+
</code>
+

Latest revision as of 13:59, 30 July 2008

Mixer settings for voice recording: It is required that DAI Mode (alsa control number 50) is "DAI 1" - only recording, or "DAI 2" - recording and playback simultaneously. "DAI 0" is only for playback. There's also "DAI 3", but I don't know what this is.

Depending on the recording source, Mic1 for headset or Mic2 for handset have to be set accordingly via the Mic Selection Mux, which is alsa control number 53. Also, set Capture Left Mux and Capture Right Mux (65, 64) to PGA.

Below is an alsa state file, which can be used to put the device into voice recording mode. It's advisable to have a programm connected to e.g. /dev/dsp, else the device might crash. Change settings via:

 alsactl -f voice-recording.state restore

http://wildsau.enemy.org/~moko/voice-recording.state

Personal tools

Mixer settings for voice recording: It is required that DAI Mode (alsa control number 50) is "DAI 1" - only recording, or "DAI 2" - recording and playback simultaneously. "DAI 0" is only for playback. There's also "DAI 3", but I don't know what this is.

Depending on the recording source, Mic1 for headset or Mic2 for handset have to be set accordingly via the Mic Selection Mux, which is alsa control number 53. Also, set Capture Left Mux and Capture Right Mux (65, 64) to PGA.

Below is an alsa state file, which can be used to put the device into voice recording mode. It's advisable to have a programm connected to e.g. /dev/dsp, else the device might crash.

File:Example.jpg