USB Product IDs
From Openmoko
HaraldWelte (Talk | contribs) (→USB Vendor and Prduct IDs) |
PaulFertser (Talk | contribs) (→Assigned/Allocated Openmoko USB Product IDs: add IDs for UDAD-T1 and UDAD-T2) |
||
(119 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
= USB Vendor and Product IDs = | = USB Vendor and Product IDs = | ||
+ | == Open registry for community / homebrew USB Product IDs == | ||
+ | |||
+ | '''Do not apply before your project is published under a FOSS license!''' | ||
+ | |||
+ | As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free. | ||
+ | |||
+ | '''Do not apply before your project is published under a FOSS license!''' | ||
+ | |||
+ | === Conditions === | ||
+ | |||
+ | '''Do not apply before your project is published under a FOSS license!''' | ||
+ | |||
+ | By applying for an Openmoko Product ID, you acknowledge that either | ||
+ | * the USB device you are developing is either an open hardware project (as per [http://www.oshwa.org/definition/ the OSHW Definition]), '''or''' | ||
+ | * the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license | ||
+ | |||
+ | '''Do not apply before your project is published under a FOSS license!''' | ||
+ | |||
+ | In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including | ||
+ | * a name and short description of your usb device project | ||
+ | * the license under which you are releasing the hardware and/or software/firmware of the device | ||
+ | * a link to the project website and/or source code repository, if any | ||
+ | * if you need multiple Product IDs, please indicate + explain this at the first message, rather than applying for a second ID later | ||
+ | |||
+ | Feel free to also contact us on IRC, #openmoko channel on Freenode. | ||
+ | |||
+ | '''Do not apply before your project is published under a FOSS license!''' | ||
+ | |||
+ | == Assigned/Allocated Openmoko USB Product IDs == | ||
Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.''' | Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.''' | ||
Line 41: | Line 70: | ||
|- | |- | ||
| 0x1457 / 0x1d50 || 0x5126 || TBD | | 0x1457 / 0x1d50 || 0x5126 || TBD | ||
+ | |- | ||
+ | | 0x1d50 || 0x5200-0x52ff || Reserved for use in documentation concerning the configuration of USB buses and devices. | ||
+ | |- | ||
+ | | 0x1d50 || 0x5300-0x53ff || [http://rockbox.org/ rockbox: free replacement firmware for digital music players] | ||
|- | |- | ||
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero] | | 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero] | ||
Line 72: | Line 105: | ||
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board] | | 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board] | ||
|- | |- | ||
− | | 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M] | + | | 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)] |
|- | |- | ||
− | | 0x1d50 || 0x6010 || [http:// | + | | 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller] |
+ | |- | ||
+ | | 0x1d50 || 0x6011 || LeoLipo (DFU) | ||
+ | |- | ||
+ | | 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds] | ||
+ | |- | ||
+ | | 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II] | ||
+ | |- | ||
+ | | 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor] | ||
+ | |- | ||
+ | | 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board] | ||
+ | |- | ||
+ | | 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player | ||
+ | |- | ||
+ | | 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller | ||
+ | |- | ||
+ | | 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller | ||
+ | |- | ||
+ | | 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening | ||
+ | |- | ||
+ | | 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID | ||
+ | |- | ||
+ | | 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables | ||
+ | |- | ||
+ | | 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID) | ||
+ | |- | ||
+ | | 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial) | ||
+ | |- | ||
+ | | 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard | ||
+ | |- | ||
+ | | 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication | ||
+ | |- | ||
+ | | 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8) | ||
+ | |- | ||
+ | | 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12) | ||
+ | |- | ||
+ | | 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring | ||
+ | |- | ||
+ | | 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project | ||
+ | |- | ||
+ | | 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope | ||
+ | |- | ||
+ | | 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people | ||
+ | |- | ||
+ | | 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns | ||
+ | |- | ||
+ | | 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns | ||
+ | |- | ||
+ | | 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns | ||
+ | |- | ||
+ | | 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform | ||
+ | |- | ||
+ | | 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration | ||
+ | |- | ||
+ | | 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp | ||
+ | |- | ||
+ | | 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo | ||
+ | |- | ||
+ | | 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader | ||
+ | |- | ||
+ | | 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial | ||
+ | |- | ||
+ | | 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage | ||
+ | |- | ||
+ | | 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface | ||
+ | |- | ||
+ | | 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter | ||
+ | |- | ||
+ | | 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader) | ||
+ | |- | ||
+ | | 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator | ||
+ | |- | ||
+ | | 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode) | ||
+ | |- | ||
+ | | 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode) | ||
+ | |- | ||
+ | | 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader | ||
+ | |- | ||
+ | | 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker] | ||
+ | |- | ||
+ | | 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6] | ||
+ | |- | ||
+ | | 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer] | ||
+ | |- | ||
+ | | 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b] | ||
+ | |- | ||
+ | | 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6059 || [https://github.com/avishorp/xser xser USB-Serial dongle] | ||
+ | |- | ||
+ | | 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test] | ||
+ | |- | ||
+ | | 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One] | ||
+ | |- | ||
+ | | 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2] | ||
+ | |- | ||
+ | | 0x1d50 || 0x605e || [https://github.com/blinkiverse/DmxAnalogLed Blinkiverse Analog LED Fader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x605f || [https://github.com/mdsinstruments/DIPIO Small DIP package Cypress FX2] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6060 || [https://github.com/mdsinstruments/DIGIO Data logger using the Cypress FX2] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6061 || [http://fabiobaltieri.com/2013/03/22/power-manager/ Power Manager] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6062 || [http://www.ohwr.org/projects/wr-cores WhiteRabbit console and USB-Wishbone bridge] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6063 || [http://cpcfpga.com/ CPC FPGA] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6064 || [http://cpcfpga.com/ CPC FPGA (DFU)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6065 || [http://cpcfpga.com/ CPC FPGA (serial)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6066 || [http://nuand.com Nuand BladeRF] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6067 || [https://github.com/thingotron/orbotron_9000 Orbotron 9000 (serial)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6068 || [https://github.com/thingotron/orbotron_9000 Orbotron 9000 (HID)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6069 || [https://github.com/avishorp/xser xser (DFU mode)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x606a || [https://github.com/avishorp/xser xser (legacy mode)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x606b || [https://github.com/bharrisau/s08-245 S08-245, urJtag compatible firmware for S08JS] | ||
+ | |- | ||
+ | | 0x1d50 || 0x606c || [http://blinkytape.com Blinkytape full-color light tape] | ||
+ | |- | ||
+ | | 0x1d50 || 0x606d || [https://github.com/synthetos/TinyG TinyG open source motion controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x606e || [http://reefangel.com/download.aspx Reefangel Evolution 1.0] | ||
+ | |- | ||
+ | | 0x1d50 || 0x606f || [http://schneidersoft.net/USB2CAN Geschwister Schneider USB to CAN adapter] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6070 || [http://openpinballproject.wordpress.com/ Open Pinball Project] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6071 || [http://theglitch.sourceforge.net The Glitch HID] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6072 || [http://theglitch.sourceforge.net The Glitch Disk] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6073 || [http://theglitch.sourceforge.net The Glitch Serial] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6074 || [http://theglitch.sourceforge.net The Glitch MIDI] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6075 || [http://theglitch.sourceforge.net The Glitch RawHID] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6076 || [http://git.qiprog.org/?p=vultureprog.git;a=summary;js=1 Vultureprog BIOS chip programmer] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6077 || [https://github.com/moorelogic/PaintDuino PaintDuino] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6078 || [http://en.techno-innov.fr/technique_dtplug/ DTplug] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6079 || [https://github.com/q-rai/MoodLightUSB Mood Light USB] | ||
+ | |- | ||
+ | | 0x1d50 || 0x607a || [https://github.com/scanlime/fadecandy Fadecandy] | ||
+ | |- | ||
+ | | 0x1d50 || 0x607b || [https://github.com/dn-electronics/RCDongle RCDongle for IR remote control] | ||
+ | |- | ||
+ | | 0x1d50 || 0x607c || [http://openvizsla.org OpenVizsla USB sniffer/analyzer] | ||
+ | |- | ||
+ | | 0x1d50 || 0x607d || [https://github.com/sprk/core Spark Core Arduino-compatible board with WiFi] | ||
+ | |- | ||
+ | | 0x1d50 || 0x607e || [https://github.com/littlewire/Little-Wire OSHUG Wuthering USB multi-tool] | ||
+ | |- | ||
+ | | 0x1d50 || 0x607f || [https://github.com/sprk/core Spark Core Arduino-compatible board with WiFi (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6080 || [http://cgit.jvnv.net/arcin/ arcin arcade controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6081 || [https://github.com/Nuand/bladeRF/wiki/Proposal-for-new-FX3-firmware-loading BladeRF bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6082 || [https://github.com/scanlime/fadecandy Facecandy *USB DFU loader) | ||
+ | |- | ||
+ | | 0x1d50 || 0x6083 || [http://www.lightup.io LightUp (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6084 || [http://cgit.jvnv.net/arcin/ arcin arcade controller (USB DFU loader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6085 || [https://github.com/irkit/device IRKit for controlloing home electronics from iOS devices] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6086 || [http://onerng.info/ OneRNG entropy device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6087 || [http://blinkinlabs.com/blinkytape Blinkytape (alternate USB endpoint config)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6088 || [https://github.com/m-ou-se/picp picp PIC16F145x based PIC16F145x programmer] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6089 || [http://greatscottgadgets.com/hackrf/ HackRF One SDR] | ||
+ | |- | ||
+ | | 0x1d50 || 0x608a || [http://bleduino.cc BLEduino (Arduino-compatible BLE (Bluetooth 4.0) development board)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x608b || [https://github.com/myriadrf/A2300 Loctronix ASR-2300 SDR/motion sensing module] | ||
+ | |- | ||
+ | | 0x1d50 || 0x608c || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x608d || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x608e || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x608f || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6090 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6091 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6092 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6093 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6094 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6095 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6096 || [http://www.lightup.io LightUp (sketch)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6097 || [http://tessel.io/ Tessel JavaScript enabled Microcontroller with built-in WiFi] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6098 || [http://www.kickstarter.com/projects/1708444109/rfidler-a-software-defined-rfid-reader-writer-emul RFIDler] | ||
+ | |- | ||
+ | | 0x1d50 || 0x6099 || [https://github.com/myriadrf/RASDR RASDR Radio Astronomy SDR Rx Interface] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609a || [https://github.com/myriadrf/RASDR RASDR Radio Astronomy SDR Tx Interface] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609b || [https://github.com/myriadrf/RASDR RASDR Radio Astronomy SDR Bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609c || [https://github.com/Galvant/antiafk_firmware antiAFK keyboard] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609d || [https://code.google.com/p/pic16f1454-bootloader/ PIC16F145x bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609e || [https://github.com/fabule/Clyde Clyde Lamp by Fabule (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x609f || [https://github.com/fabule/Clyde Clyde Lamp by Fabule (sketch)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a0 || [http://smoothieware.org/smoothiepanel Smoothiepanel robotic control interface] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a1 || [https://github.com/airspy/host Airspy] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a2 || [http://barebox.org barebox bootloader USB DFU (Device Firmware Upgrade) Mode] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a3 || [https://github.com/Galvant/antiafk_firmwareantiAFK keyboard (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a4 || Papilio Duo (AVR) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a5 || Papilio Duo (FPGA) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a6 || [https://github.com/bvernoux/hydrafw/wiki HydraBus/HydraNFC (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a7 || [https://github.com/bvernoux/hydrafw/wiki HydraBus/HydraNFC] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a8 || reserved | ||
+ | |- | ||
+ | | 0x1d50 || 0x60a9 || [https://github.com/blinkinlabs/blinkytile Blinky Light Controller (DFU bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60aa || [https://github.com/blinkinlabs/blinkytile Blinky Light Controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ab || [https://github.com/ManiacalLabs/AllPixel AllPixel USB control for major programmable LED strips] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ac || [http://feaser.com/openblt/doku.php OpenBLT generic microcontroller bootloader ] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ad || [https://github.com/gzip/eagle-usb-gamepad/ Clasic Gamepad USB Adapter (NES)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ae || [https://github.com/gzip/eagle-usb-gamepad/ Clasic Gamepad USB Adapter (N64)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60af || [https://github.com/gzip/eagle-usb-gamepad/ Clasic Gamepad USB Adapter (DB9)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b0 || [https://www.facebook.com/watterott.electronic/photos/a.211504945547854.54926.131472890217727/928577840507224 Waterott Arduino based Clock (caterina bootloader) ] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b1 || [https://github.com/felixekman/Drinkbot Drinkbot (processing)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b2 || [https://github.com/felixekman/Drinkbot Drinkbot (OTG-tablet support)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b3 || [https://calc.pw/ calc.pw password generator device (standard)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b4 || [https://calc.pw/ calc.pw password generator device (enhanced)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b5 || [http://code.timvideos.us/ TimVideos' HDMI2USB (FX2) - Unconfigured device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b6 || [http://code.timvideos.us/ TimVideos' HDMI2USB (FX2) - Firmware load/upgrade] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b7 || [http://code.timvideos.us/ TimVideos' HDMI2USB (FX2) - HDMI/DVI Capture Device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b8 || [http://code.timvideos.us/ TimVideos' HDMI2USB (Soft+UTMI) - Unconfigured device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60b9 || [http://code.timvideos.us/ TimVideos' HDMI2USB (Soft+UTMI) - Firmware upgrade] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ba || [http://code.timvideos.us/ TimVideos' HDMI2USB (Soft+UTMI) - HDMI/DVI Capture Device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60bc || [http://www.moonbaseotago.com/cheaprf/programmer1/programmer1.html Simple CC25xx programmer / serial board] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60bd || [http://bhoreal.com/ Open Source control interface for multimedia applications] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60be || [https://github.com/pixelmatix/aurora Pixelmatix Aurora (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60bf || [https://github.com/pixelmatix/aurora Pixelmatix Aurora] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c0 || [https://github.com/thomask77/nucular-keyboard Nucular Keyboard USB-Adapter for older ThinkPad Keyboards] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c1 || [http://brewbit.com BrewBit Model-T pOSHW temperature controller for homebrewers (bootloader)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c2 || [http://brewbit.com BrewBit Model-T pOSHW temperature controller for homebrewers] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c3 || [http://x-at.github.io/xat/2015/01/13/arduino-board.html X Antenna Tracker arduino board] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c4 || [https://github.com/CANtact/cantact-fw CAN bus USB communication device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c5 || [https://github.com/74hc595/PIC16F1-USB-Bootloader PIC16F1 USB bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c6 || [http://altusmetrum.org/USBtrng/ USBtrng hardware random number generator] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c7 || [https://github.com/Zubax/zubax_gnss Zubax GNSS positioning module for light UAV systems] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c8 || [https://github.com/hbekel/xlink Xlink data transfer and control system for Commodore C64] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60c9 || [https://github.com/alwynallan/redoubler random number generator] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ca || [https://github.com/DusteDdk/FinalKey FinalKey password manager] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60cb || [https://bitbucket.org/abe_k/pterodaq PteroDAQ Data Acquisition on FRDM-KL25Z and future boards] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60cc || [https://github.com/papcodientu/LamDiNao LamDiNao] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60cd || [https://www.openlighting.org Open Lighting DMX512 / RDM USB widget] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60de || [https://wiki.cryptech.is/browser/user/ft/stm32-avalanche-noise Cryptech.is random number generator] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60df || [http://hdmi2usb.tv/numato-opsis Numato Opsis HDMI2USB board - unconfigured] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e0 || [http://hdmi2usb.tv/numato-opsis Numato Opsis HDMI2USB board - JTAG Programming Mode] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e1 || [http://hdmi2usb.tv/numato-opsis Numato Opsis HDMI2USB board - User Mode] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e2 || [http://simtrace.osmocom.org Osmocom SIMtrace 2 - DFU loader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e3 || [http://simtrace.osmocom.org Osmocom SIMtrace 2 - Main Firmware] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e4 || [https://github.com/3DRacers 3D printed racing game - Catalina CDC bootloader] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e5 || [https://github.com/3DRacers 3D printed racing game - Application] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e6 || [https://github.com/greatscottgadgets/greatfet replacement for GoodFET/FaceDancer - GreatFet] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e7 || [https://github.com/greatscottgadgets/greatfet replacement for GoodFET/FaceDancer - GreatFet target] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e8 || [https://hackaday.io/project/8282-alpen-clack Alpen Clack keyboard] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60e9 || [http://henning-bekel.de/keyman64 keyman64 keyboard itercepter] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ea || [https://github.com/scanlime/wiggleport/ Wiggleport FPGA-based I/O board] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60eb || [https://github.com/HubertD/candleLight candleLight CAN dongle] [https://github.com/HubertD/candleLight_gsusb firmware] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ec || [https://github.com/T3P3/Duet Duet 3D Printer Controller] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ed || (reserved) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ee || (reserved) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60ef || (reserved) | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f0 || [http://www.siphec.com/project/UDAD/ UDAD-T1 data aquisition device (boot)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f1 || [http://www.siphec.com/project/UDAD/ UDAD-T1 data aquisition device] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f2 || [http://www.siphec.com/project/UDAD/ UDAD-T2 data aquisition device (boot)] | ||
+ | |- | ||
+ | | 0x1d50 || 0x60f3 || [http://www.siphec.com/project/UDAD/ UDAD-T2 data aquisition device] | ||
+ | |- | ||
+ | | || || - insert next record here - | ||
+ | |- | ||
+ | | 0x1d50 || 0x8085 || [http://madresistor.org/box0/ Box0 (box0-v5) - Free/Open source tool for exploring science and electronics] | ||
+ | |- | ||
+ | | 0x1d50 || 0xCC15 || [https://rad1o.badge.events.ccc.de/ rad1o badge for CCC congress 2015] | ||
|} | |} | ||
The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list | The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Revision as of 12:20, 4 June 2016
Contents |
USB Vendor and Product IDs
Open registry for community / homebrew USB Product IDs
Do not apply before your project is published under a FOSS license!
As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.
Do not apply before your project is published under a FOSS license!
Conditions
Do not apply before your project is published under a FOSS license!
By applying for an Openmoko Product ID, you acknowledge that either
- the USB device you are developing is either an open hardware project (as per the OSHW Definition), or
- the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license
Do not apply before your project is published under a FOSS license!
In order to request a product ID, please send an e-mail to usb-id@openmoko.org including
- a name and short description of your usb device project
- the license under which you are releasing the hardware and/or software/firmware of the device
- a link to the project website and/or source code repository, if any
- if you need multiple Product IDs, please indicate + explain this at the first message, rather than applying for a second ID later
Feel free to also contact us on IRC, #openmoko channel on Freenode.
Do not apply before your project is published under a FOSS license!
Assigned/Allocated Openmoko USB Product IDs
Openmoko is using the USB Vendor and Product IDs below. Note that 0x1457 is the Vendor ID of FIC, Inc, and 0x1d50 is the vendor ID of Openmoko, Inc.
The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |