Talk:Qtopia / Qt Extended on FreeRunner

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m
Line 12: Line 12:
  
 
-russell
 
-russell
 +
 +
I had pretty good luck with the procedure on the Qtopia on FreeRunner page using KnoppMyth 5.5 for my linux. Had to su but few problems. The only part I didn't figure out was the -C switch in the tar command. Failed every time. Worked around it.
 +
Pfloyd

Revision as of 22:54, 23 July 2008

Mounting the jffs file as described did not work for me. Instead I did the following:

mknod /dev/mtdblock0 b 31 0 
losetup /dev/loop0 <rootfs.jffs2 file> 
echo "/dev/loop0" > /sys/module/block2mtd/parameters/block2mtd 
mount -t jffs2 /dev/mtdblock0 <mountpoint> 

This seemed to work out alright.

-russell

I had pretty good luck with the procedure on the Qtopia on FreeRunner page using KnoppMyth 5.5 for my linux. Had to su but few problems. The only part I didn't figure out was the -C switch in the tar command. Failed every time. Worked around it. Pfloyd

Personal tools

Mounting the jffs file as described did not work for me. Instead I did the following:

mknod /dev/mtdblock0 b 31 0 
losetup /dev/loop0 <rootfs.jffs2 file> 
echo "/dev/loop0" > /sys/module/block2mtd/parameters/block2mtd 
mount -t jffs2 /dev/mtdblock0 <mountpoint> 

This seemed to work out alright.

-russell