Talk:Neo FreeRunner Battery

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (Trick: new section)
Line 1: Line 1:
 
It would be good to add information on what brand/model numbers can be used here.
 
It would be good to add information on what brand/model numbers can be used here.
 +
 +
== Trick ==
 +
 +
I'm not sure it it solves a 'deep discharge' problem. I noticed that if the power from USB is not sufficient to boot Linux it is sufficient to log into NOR.
 +
Than if I discharged OM:
 +
1. Connect the USB connector
 +
2. OM would try to boot but kernel panic will occure due to insufficient battery (flashing red light)
 +
3. I can turn off the phone and switch it on logging into NOR (I have to check if I can skip to this step by holding AUX)
 +
4. Then I wait a while and choose to boot OM

Revision as of 06:51, 31 January 2009

It would be good to add information on what brand/model numbers can be used here.

Trick

I'm not sure it it solves a 'deep discharge' problem. I noticed that if the power from USB is not sufficient to boot Linux it is sufficient to log into NOR. Than if I discharged OM: 1. Connect the USB connector 2. OM would try to boot but kernel panic will occure due to insufficient battery (flashing red light) 3. I can turn off the phone and switch it on logging into NOR (I have to check if I can skip to this step by holding AUX) 4. Then I wait a while and choose to boot OM

Personal tools

It would be good to add information on what brand/model numbers can be used here.