Talk:Neo 1973 GTA01 Power Management
m (5V power supply question)
m (Talk:Neo1973 GTA01 Power Management moved to Talk:Neo 1973 GTA01 Power Management: See Openmoko Wiki Editing Guidelines)
|(One intermediate revision by one user not shown)|
Latest revision as of 12:31, 13 July 2008
The SPI connected LCM asic (JBT6K74-AS(PI)) doesn't do any kind of drawing. It mainly controls the power states and the format in which data is shifted out to the LCD (timing), but also includes gamma correction and there are two unexplained parts called "built-in oscillator" and "booster".
Built in oscillator and booster probably together provide the required voltages to supply the LCD, which will typically require at least one supply other than 3.3V. --Speedevil 01:27, 26 July 2007 (CEST)
 5V supply
You've misread the maxim parts datasheet.
Maximum power is an absolute maximum rating, it's not a normal operating condition.
You have to really abuse it to get it to dissipate that much power - for example supplying lots of current into the input pins trying to take them beyond the supply rails. The actual power draw is low single digit milliamps at 5V, maybe 25mW or so when active.
I would suggest that rather than the complex sensor conditioner, you simply use a 3.3V ADC.
OK - thats good news. We still need 5V for the transducer though don't we?