Talk:Booting the Neo FreeRunner from SD via U-Boot

From Openmoko

Revision as of 08:14, 12 July 2008 by Peterpall (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Needed a different partition layout for my SD card

I needed a SD (Not HDMC) card and needed the following layout:

  • Partition 1 is a primary partition with a FAT filesystem containing the uImage
  • Partiton 2 is a Ext3 Filesystem containing the root filesystem. Since the uImage from this partition is never used - it is not really important keeping it up-to-date.

My hardware setup is:

  • Latest uBoot (July 12, 2008)
  • Freerunner (GTA02V5)
Personal tools

Needed a different partition layout for my SD card

I needed a SD (Not HDMC) card and needed the following layout:

  • Partition 1 is a primary partition with a FAT filesystem containing the uImage
  • Partiton 2 is a Ext3 Filesystem containing the root filesystem. Since the uImage from this partition is never used - it is not really important keeping it up-to-date.

My hardware setup is:

  • Latest uBoot (July 12, 2008)
  • Freerunner (GTA02V5)