Stable Hybrid Release
SHR is one of the many distributions that currently work on the Openmoko phones. You can compare a distribution with an Operating System on normal computers. It gives the phone all the software needed for operating. For more information about the different flavors, see distributions. Template:SHR
The Stable Hybrid Release (SHR) is intended to be a combination of the FSO, some of the Openmoko2007.2 GTK software, and the ASU that provides all of the functionality of the 2007.2 software, but with the stability of the FSO and the new GUI toolkits provided by the ASU. It will probably be based on an ASU build, with the FSO software and GTK end-user apps added.
(We're not married to the idea of using the GTK apps, but they already exist and are more-or-less debugged at least on the UI side. If someone knows of a more stable and/or usable app that's appropriate for the OM, let us know by dropping a comment on the Talk tab of this page.)
Follow the project here: SHR Project Homepage
Why SHR exists
This is long and rambling, and maybe more of a tirade than information, but it does give some background on why this project was started. The overview gives, well, the overview, this is more of a deeper examination of the existing releases and why we felt we needed something new.
Feel free to skip this whole section if you already think SHR is a good idea :-)
Why not ASU?
ASU is the distro that OM is putting their main effort into right now. ASU looks very slick, but is very unstable right now, and is likely to be unstable and feature-poor for some time.
Why not 2007.2?
2007.2 is the "old" Openmoko distribution, now unsupported. Unsupported == often broken. Also, neither calls nor suspend/resume ever worked reliably.
Why not Qtopia?
You can also install Qtopia on the phone.
Qtopia is stable but you can only build qt apps on Qtopia, which means lots of linux apps you might want to port suddenly got a lot harder to port. And some people just don't like developing for qt.
Also, as far as I know, there is no documented build procedure for Qtopia on Openmoko.
Why not FSO?
FSO is the initiative by Mickey Lauer and crew to create a good D-Bus infrastructure which runs on the neos, among other devices.
FSO is by far the most stable & usable release, if all you want is a phone. (I mean *all*. It just has a dialer right now, not even call history.)
FSO is never intended on its own to be a full image, it's just the infrastructure and a demo app.
Other people are supposed to put a front end on FSO. So that's what we're doing.
So SHR is FSO, with us doing the necessary work to port the old high-functionality 2007.2 stuff on a stable call platform. We have an adapter from the 2007.2 call service to the FSO call service and we're installing the basic 2007.2 apps on the FSO baseline install.
In theory, it should be very simple, and should give us dialer, contact management, SMS, terminal, media player, gps app, etc. since all those already work on 2007.2. And the dialer should be stable, which it wasn't in 2007.2
The first pass at making the GTK software use the FSO will involve just creating a gsmd workalike that sends commands to the ophoned dbus api from FSO. mickeyterm is an example of another program that lets you send GSM commands through ophoned.
We want to have a build that is stable, so we'll need some standard way of identifying the latest stable pieces of all the different software in the SHR, as well as a way to identify previous released versions of the SHR.
See the Developer Info on the upper right side of the SHR project page.
How to join
- Send a request to join on the SHR project on the OM projects page.
- Join firstname.lastname@example.org and send an introductory email.
The introductory email can just be a couple of lines if you like. It should include what part would you want to work on, and any special knowledge you have that would relate to the project, e.g. if you are an OE guru or linux kernel geek, matchbox-window manager guru, etc.
See SHR Development to find out how to set up your development environment to work on existing SHR packages.
Hang out in #openmoko-cdevel on chat.freenode.net between 5pm and 11pm GMT to chat with the people developing SHR. (Primarily MarcOChapeau and Ainulindale.)
Tasks & status
Here's a list of the tasks for the SHR:
|Task||Status||Owner||Helping out||Last update||Comment|
|Run the build host||Have server CPU time and disk space; just need to talk about git branches||paulproteus||2008-07-03|
|Implement libframeworkd-glib||alpha.||Ainulindale||2008-08-07||Usable for call purposes / network registration and such.|
|port 2007.2 dialer2 (now dialer3) to use ophoned instead||Pre-Alpha||Ainulindale||MarcOChapeau||2008-07-28|
|port 2007.2 gsm-panel apps to use ophoned instead||Beta||Ainulindale||no one yet||2008-07-30||Should be tested regarding the signal strength updates.|
|switch media player to use alsa directly||not started||Abraxa||no one yet||2008-07-30|
|verify that no other important apps in 2007.2 need ported off of pulseaudio (perhaps by putting all 2007.2 apps (minus pulseaudio) on FSO milestone 2 and verifying which ones still have sound :-)||not started||no one yet||no one yet||2008-07-30|
|get neod workalike that uses ophoned to determine if you're on a call||Pre-Alpha||No one yet||no one yet||2008-07-28|
|Test & label good SHR releases||Awaiting builds||Kevin Dean||Nobody||2008-07-05|
|Identify packages to go into SHR||Pre-alpha||Wurp||Anyone & everyone||2008-07-12|
|Identify differences between FSO & 2007.2 that need investigation||Pre-alpha||Wurp||Nobody yet||2008-07-12|
|Integrate mwester's pulseaudio resume fix into SHR||Not started||Wurp||Nobody yet||2008-07-15|
|Create messages3 as a copy of 2007.2's messages2 and get it compiling (comment out phonekit calls)||Pre-Alpha||AndreasD||Nobody yet||2008-08-07|
|port messages3 to use libframework-glib||Pre-Alpha||AndreasD||Nobody yet||2008-08-07|
|Create contacts3 as a copy of 2007.2's contacts2 and get it compiling (comment out phonekit calls)||Not started||Nobody yet||Nobody yet||2008-08-07|
|port contacts3 to use libframework-glib||Not started||Nobody yet||Nobody yet||2008-08-07|
|make ophonekitd switch the sound over to gsmhandset when a call is initiated/received||Not started||Nobody yet||Nobody yet||2008-08-07|
|port dialer2's journal to dialer3/ophonekitd/libframework-glib||Not started||Nobody yet||Nobody yet||2008-08-07|
|Set up launcher (home) page and document how to add new apps to it||The launcher will be the apps tab of openmoko-today2||2008-07-08|
|Set up projects.openmoko.org project for the patch to apply to FSO to make it SHR||Done! SHR Project HomePage||2008-07-08|
|fork media player for SHR||Done!||2008-08-07|
- Needs owner! - someone needs to take responsibility for this task
- Not started - someone has taken responsibility, but hasn't done anything yet...
- Started - someone has started work, but there is nothing usable yet
- Alpha - it might work, maybe
- Beta - it probably works most of the time
- Maintained - a stable release is out there, working on oddball bugs & new features
- Done - a stable release is out there, no activity on this task now
Current applications (dialer3 and openmoko-panel-gsm) use frameworkd. So in order to be able to build and test these applications, you have to build frameworkd (MS2) and gsm0710muxd.
In order to be able to use in an easy way frameworkd, without bothering about dbus calls (which could be difficult for new developers), we built a library allowing everyone to use the functions of frameworkd as if it were simple C functions. We're using asynchronous callbacks for dbus.
SHR uses FSO to interface to the hardware, so see the FSO architecture documentation, too. For how the openmoko*3 applications that SHR forked off 2007.2 access FSO, see http://www.calaquendi.org/om/ophonekitd.png.
List of packages included
- lots more...
- lots more...
- lots more...
IRC conversation about how we're using revision control
This is deprecated, for now we use shr-devel as our only repository. This will change after the first SHR release.
12:36 < wurp2> Everything *new* goes on OM projects site 12:36 < Ainulindale> I totally agree 12:36 < wurp2> Updates to 2007.2 apps go back into the home svn 12:36 < Ainulindale> paulproteus: no, you're an external cabal all by yourself :-) 12:36 < cb22> anyone planning on drawing up a roadmap? 12:36 < paulproteus> cb22, We can do that in Trac in fact. 12:36 < wurp2> And changes to the underlying release go as patches into our OE branch, yes? 12:36 < paulproteus> (or on the wiki page) 12:36 < paulproteus> wurp2, Right 12:36 < paulproteus> mwester, Sanity-check my terminology where I mess things up! 12:37 < Ainulindale> hmmm fuzzy for me but what should go in OM and what should go in OE ? 12:37 <@mwester> Sure 12:37 <@mwester> What do you mean by OM? 12:37 < paulproteus> Ainulindale, New software we write goes in the projects.openmoko.org. 12:37 <@mwester> right. 12:37 < Ainulindale> Ok so the wrapper for example 12:37 < wurp2> Anything stand-alone goes in OM (projects.openmoko.org) 12:37 < wurp2> yeah 12:37 <@mwester> So we will use projects.openmoko.org for as much as we can, and OE to build the distro. 12:37 < Ainulindale> Sounds right to me 12:37 < wurp2> Great! 12:38 <@mwester> We *will not* use the OM git repo, as that is owned and controlled by Openmoko the company...