SettingsGUI/de

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (Replacing 'OpenMoko' with 'Openmoko')
m (Packages: buildhost site -> downloads site.)
 
(2 intermediate revisions by one user not shown)
Line 114: Line 114:
 
Access the current SVN version at: http://neo1973-germany.de/svn/SettingsGUI/
 
Access the current SVN version at: http://neo1973-germany.de/svn/SettingsGUI/
 
=== Packages ===
 
=== Packages ===
The Package is now buildable by bitbake. Download the latest .ipk from: [http://buildhost.openmoko.org/daily/neo1973/deploy/glibc/ipk/armv4t/settingsgui_0.7+0.8-beta-r0_armv4t.ipk settingsgui_0.7+0.8-beta-r0_armv4t.ipk]
+
The Package is now buildable by bitbake. Download the latest .ipk from: http://downloads.openmoko.org/repository/
  
 
Thanks to [[User:Alessandro | Alessandro]] there still is the inofficial .ipk and a .bb file. Have a look at his user site.
 
Thanks to [[User:Alessandro | Alessandro]] there still is the inofficial .ipk and a .bb file. Have a look at his user site.
Line 211: Line 211:
  
 
[[Category:Applications/de]]
 
[[Category:Applications/de]]
[[Category:Openmoko/de]]
+
[[Category:Basic End User/de]]
[[Category:Guides/de]]
+

Latest revision as of 21:35, 17 September 2008

In progress: This article or section documents one or more features whose implementation are in progress.
SettingsGUI - Screen Settings
SettingsGUI - Audio Settings
SettingsGUI - GSM Settings
SettingsGUI - GPRS Settings
SettingsGUI - Blueooth Settings


Contents

[edit] Overview

Until Openmoko/de releases an official GUI-Tool to change settings, SettingsGUI allows you to set various settings of the gta01.

This program is written in Python/de using pygtk. It can be used only if those are present in your environment (see SettingsGUI/de#Environment).

[edit] Current Features

  • Screen (Backlight enable/disable, Backlight brightness, Screen Orientation)
  • Audio (profile selection, volume, mute, save to profile)
  • GSM/de (restart gsmd/de, signal strength, provider, status)
  • Manually using GPRS/de (load and save settings from and to /etc/ppp/peers/, connect, set APN, User, Password, Number)
  • Bluetooth/de (enable/disable, set-up/monitor PAN connections, scan for peers)

[edit] Planned Features

  • GSM (Provider selection)
  • Bluetooth/de (signal strength)
  • GPRS (display transfer rate, activate GPRS router)
  • Battery/de (show capacity, voltage, charger-status)

[edit] Comment on GSM Support

  • As there are no gsmd python bindings available at the time, SettingGUI uses python-subprocess and threads to communicate to the commandline of libgsmd-tool for the time being.
  • To prevent interference with the GSM modem you have to expicitly power-up and register the modem by toggeling the "GSM State" checkboxes.
  • If you manually register to the gsm network (by toggeling the "Register" checkbox) SettingsGUI will sometimes not notice when the connection is established. Just toggle the init checkbox after about 3 seconds. (this seems to be due to a bug in gsmd...)
NOTE: From Version 0.7 the atcmd mode of libgsmd-tool is used. To use it revision 2957 (2007-09-12) or later of gsmd is needed. If you have an older version of gsmd - or an older Openmoko image - use the upgrade function of Package management/de, install a newer jffs2 image or use version 0.6 of SettingsGUI.


  • When the GPRS connection is still active (pppd running on the system) you should close the connection as gsmd can't start up while pppd is using the modem connection - chose "Yes" in the dialog:

SettingsGUI-0.7-close gprs.png

[edit] Comment on GPRS Support

If you have problems connecting check:

  • If the modem is initialized and registered to a network (Start gsmd and register)
  • If your login data (mostly APN and User are okay)
  • When the gsmd still running you should close the connection as gsmd will interfere with pppd - chose "Yes" in the dialog:

SettingsGUI-0.7-terminate-gsmd.png

The connection will be terminated when you quit the application. However saved peer configurations can be called independently using:

pppd debug call gprs # where gprs is the peer


Default configuration files are defined in GlobalConfiguration.py. The peer configuration, a connect- and disconnect chat script are written to /etc/ppp/peers/ on first startup if you don't already have a peer in /etc/ppp/peers/. When the connect button is pressed SettingsGUI will create latest_* files in /etc/ppp/peers/ and start the pppd with this latest_* peer.


SettingsGUI also brings a default Nameserver in case you don't have a valid /etc/resolve.conf. The IP is from the OpenDNS Project and will only work if your GPRS provider allows DNS access to this server.


If you have to change anything else than APN, user, password or dial in number for your provider please leave a note at the Discussion Page.


For details and background information on GPRS see Manually using GPRS.


[edit] Comment on Bluetooth Support

With SettingsGUI you can only connect using PAN. Due to display real estate problems Version 0.8 does not support HID pairing yet.

The IP address for your PAN connection will be generated from a configurable mask (see GlobalConfiguration.py) and the last byte of the Bluetooth Address (think of MAC address). Default IP is 10.0.0.x.

For details and background information on Bluetooth see Manually using Bluetooth.


[edit] Download

[edit] Releases

Version Download Release Focus Release Date
0.8 (current) settingsgui-0.8.tar.bz2 bluetooth settings, reorganized package structure ("settingsgui" python package included, startscript is named "settings" now) 2008-03-16
0.7b settingsgui-0.7b.tar.bz2 bugfix on GSM page, bug prevented detection of gsmd connection (emerged with libgsmd-tool update) 2007-10-02
0.7 settingsgui-0.7.tar.bz2 cleanups, using AT mode, distutils, ATDT -> ATD 2007-09-21
0.6 SettingsGUI-0.6.tar.gz audio settings (mute, save), gprs settings (all new) 2007-09-06
older Directory listing

[edit] SVN

Access the current SVN version at: http://neo1973-germany.de/svn/SettingsGUI/

[edit] Packages

The Package is now buildable by bitbake. Download the latest .ipk from: http://downloads.openmoko.org/repository/

Thanks to Alessandro there still is the inofficial .ipk and a .bb file. Have a look at his user site.

[edit] Environment

For more, see Python.

The following archives will have to be installed (source packages: python python-pygtk python-pycairo python-pygobject):

  • python-core
  • python-misc
  • python-lang
  • python-pygtk
  • python-subprocess
  • python-threading (should be a dependency of python-subprocess - todo: fix)
  • python-pygobject (should be a dependency of python-pygtk - todo: fix)

If you want to test this and do not have a build environment, you can 'ipkg install' the python components from the ScaredyCat repositories.

NOTE: These packages take up a considerable amout of space (about 10 MByte), make sure that you have enough free space or install the packages to the media card as explained in package management.


[edit] Installation / Execution

[edit] FSO and ASU Users

Use the latest Version from SVN for now.

svn co http://neo1973-germany.de/svn/SettingsGUI/trunk SettingsGUI-svn

The following addidional packages have to be installed:

opkg install alsa-utils-amixer
opkg install bluez-utils
# opkg install gsmd
# opkg install gsmd-tools
        

[edit] GPRS / GSM Panel

You may not want to use those with FSO/ASU! - It WILL break the phone applications (no calls / sms)!

SettingsGUI is not yet supporting the new framework-stack, so you'll have to use gsmd for GSM/GPRS. Therefore you would have to install the packages and stop the gsmget daemon already running. Once you've installed gsmd it may start on every system boot, which may then prevent any other GSM daemon from starting. This may break your phone applications until you fix the problem again.

[edit] Get GPRS working anyway

1) Stop gsmget

killall gsmget

2) Connect to your mobile carrier using the GSM Panel

3) Connect to GPRS (answer "yes" when asked to kill the GSM daemon)

[edit] From package

  • add Alessandros repository as a ipkg source
vi /etc/ipkg/alessandro.conf
  • insert
src/gz aiurlano-armv4t http://aiurlano.netsons.org/Openmoko/ipk/armv4t
src/gz aiurlano-all http://aiurlano.netsons.org/Openmoko/ipk/all
  • update your db
ipkg update
  • install latest settingsgui
ipkg install settingsgui


[edit] From source

  • download file to Neo (e.g. using wget)
  • Uncompress tar.bz2 file (e.g. e.g. tar -xjvf file.tar.bz2)
  • install:
cd settingsgui-x.x
mv settingsgui  settingsgui.py
mkdir settingsgui 
mv * settingsgui
mv settingsgui/settingsgui.py ./
  • run:
export DISPLAY=:0.0
python settingsgui.py &

[edit] Comment on Installation

From Version 0.7 Python distutils is used. So you could also use the setup.py script to install the package:

python settingsgui-x.x/setup.py install

For Version 0.8beta (I didn't test for 0.7), don't change any names, just unpack and then:

cd settingsgui-x.x
python setup.py install

But to do this you'll also have to install the packages:

python-compile python-devel python-stringold python-distutils

[edit] References

Personal tools
In progress: This article or section documents one or more features whose implementation are in progress.
SettingsGUI - Screen Settings
SettingsGUI - Audio Settings
SettingsGUI - GSM Settings
SettingsGUI - GPRS Settings
SettingsGUI - Blueooth Settings


Overview

Until Openmoko/de releases an official GUI-Tool to change settings, SettingsGUI allows you to set various settings of the gta01.

This program is written in Python/de using pygtk. It can be used only if those are present in your environment (see SettingsGUI/de#Environment).

Current Features

  • Screen (Backlight enable/disable, Backlight brightness, Screen Orientation)
  • Audio (profile selection, volume, mute, save to profile)
  • GSM/de (restart gsmd/de, signal strength, provider, status)
  • Manually using GPRS/de (load and save settings from and to /etc/ppp/peers/, connect, set APN, User, Password, Number)
  • Bluetooth/de (enable/disable, set-up/monitor PAN connections, scan for peers)

Planned Features

  • GSM (Provider selection)
  • Bluetooth/de (signal strength)
  • GPRS (display transfer rate, activate GPRS router)
  • Battery/de (show capacity, voltage, charger-status)

Comment on GSM Support

  • As there are no gsmd python bindings available at the time, SettingGUI uses python-subprocess and threads to communicate to the commandline of libgsmd-tool for the time being.
  • To prevent interference with the GSM modem you have to expicitly power-up and register the modem by toggeling the "GSM State" checkboxes.
  • If you manually register to the gsm network (by toggeling the "Register" checkbox) SettingsGUI will sometimes not notice when the connection is established. Just toggle the init checkbox after about 3 seconds. (this seems to be due to a bug in gsmd...)
NOTE: From Version 0.7 the atcmd mode of libgsmd-tool is used. To use it revision 2957 (2007-09-12) or later of gsmd is needed. If you have an older version of gsmd - or an older Openmoko image - use the upgrade function of Package management/de, install a newer jffs2 image or use version 0.6 of SettingsGUI.


  • When the GPRS connection is still active (pppd running on the system) you should close the connection as gsmd can't start up while pppd is using the modem connection - chose "Yes" in the dialog:

SettingsGUI-0.7-close gprs.png

Comment on GPRS Support

If you have problems connecting check:

  • If the modem is initialized and registered to a network (Start gsmd and register)
  • If your login data (mostly APN and User are okay)
  • When the gsmd still running you should close the connection as gsmd will interfere with pppd - chose "Yes" in the dialog:

SettingsGUI-0.7-terminate-gsmd.png

The connection will be terminated when you quit the application. However saved peer configurations can be called independently using:

pppd debug call gprs # where gprs is the peer


Default configuration files are defined in GlobalConfiguration.py. The peer configuration, a connect- and disconnect chat script are written to /etc/ppp/peers/ on first startup if you don't already have a peer in /etc/ppp/peers/. When the connect button is pressed SettingsGUI will create latest_* files in /etc/ppp/peers/ and start the pppd with this latest_* peer.


SettingsGUI also brings a default Nameserver in case you don't have a valid /etc/resolve.conf. The IP is from the OpenDNS Project and will only work if your GPRS provider allows DNS access to this server.


If you have to change anything else than APN, user, password or dial in number for your provider please leave a note at the Discussion Page.


For details and background information on GPRS see Manually using GPRS.


Comment on Bluetooth Support

With SettingsGUI you can only connect using PAN. Due to display real estate problems Version 0.8 does not support HID pairing yet.

The IP address for your PAN connection will be generated from a configurable mask (see GlobalConfiguration.py) and the last byte of the Bluetooth Address (think of MAC address). Default IP is 10.0.0.x.

For details and background information on Bluetooth see Manually using Bluetooth.


Download

Releases

Version Download Release Focus Release Date
0.8 (current) settingsgui-0.8.tar.bz2 bluetooth settings, reorganized package structure ("settingsgui" python package included, startscript is named "settings" now) 2008-03-16
0.7b settingsgui-0.7b.tar.bz2 bugfix on GSM page, bug prevented detection of gsmd connection (emerged with libgsmd-tool update) 2007-10-02
0.7 settingsgui-0.7.tar.bz2 cleanups, using AT mode, distutils, ATDT -> ATD 2007-09-21
0.6 SettingsGUI-0.6.tar.gz audio settings (mute, save), gprs settings (all new) 2007-09-06
older Directory listing

SVN

Access the current SVN version at: http://neo1973-germany.de/svn/SettingsGUI/

Packages

The Package is now buildable by bitbake. Download the latest .ipk from: settingsgui_0.7+0.8-beta-r0_armv4t.ipk

Thanks to Alessandro there still is the inofficial .ipk and a .bb file. Have a look at his user site.

Environment

For more, see Python.

The following archives will have to be installed (source packages: python python-pygtk python-pycairo python-pygobject):

  • python-core
  • python-misc
  • python-lang
  • python-pygtk
  • python-subprocess
  • python-threading (should be a dependency of python-subprocess - todo: fix)
  • python-pygobject (should be a dependency of python-pygtk - todo: fix)

If you want to test this and do not have a build environment, you can 'ipkg install' the python components from the ScaredyCat repositories.

NOTE: These packages take up a considerable amout of space (about 10 MByte), make sure that you have enough free space or install the packages to the media card as explained in package management.


Installation / Execution

FSO and ASU Users

Use the latest Version from SVN for now.

svn co http://neo1973-germany.de/svn/SettingsGUI/trunk SettingsGUI-svn

The following addidional packages have to be installed:

opkg install alsa-utils-amixer
opkg install bluez-utils
# opkg install gsmd
# opkg install gsmd-tools
        

GPRS / GSM Panel

You may not want to use those with FSO/ASU! - It WILL break the phone applications (no calls / sms)!

SettingsGUI is not yet supporting the new framework-stack, so you'll have to use gsmd for GSM/GPRS. Therefore you would have to install the packages and stop the gsmget daemon already running. Once you've installed gsmd it may start on every system boot, which may then prevent any other GSM daemon from starting. This may break your phone applications until you fix the problem again.

Get GPRS working anyway

1) Stop gsmget

killall gsmget

2) Connect to your mobile carrier using the GSM Panel

3) Connect to GPRS (answer "yes" when asked to kill the GSM daemon)

From package

  • add Alessandros repository as a ipkg source
vi /etc/ipkg/alessandro.conf
  • insert
src/gz aiurlano-armv4t http://aiurlano.netsons.org/Openmoko/ipk/armv4t
src/gz aiurlano-all http://aiurlano.netsons.org/Openmoko/ipk/all
  • update your db
ipkg update
  • install latest settingsgui
ipkg install settingsgui


From source

  • download file to Neo (e.g. using wget)
  • Uncompress tar.bz2 file (e.g. e.g. tar -xjvf file.tar.bz2)
  • install:
cd settingsgui-x.x
mv settingsgui  settingsgui.py
mkdir settingsgui 
mv * settingsgui
mv settingsgui/settingsgui.py ./
  • run:
export DISPLAY=:0.0
python settingsgui.py &

Comment on Installation

From Version 0.7 Python distutils is used. So you could also use the setup.py script to install the package:

python settingsgui-x.x/setup.py install

For Version 0.8beta (I didn't test for 0.7), don't change any names, just unpack and then:

cd settingsgui-x.x
python setup.py install

But to do this you'll also have to install the packages:

python-compile python-devel python-stringold python-distutils

References