|In progress: This article or section documents one or more features whose implementation are in progress.|
Until Openmoko releases an official GUI-Tool to change settings, SettingsGUI allows you to set various settings of the Openmoko smartphones.
- Screen (Backlight enable/disable, Backlight brightness, Screen Orientation)
- Audio (profile selection, volume, mute, save to profile)
- GSM (restart gsmd, signal strength, provider, status)
- GPRS (load and save settings from and to /etc/ppp/peers/, connect, set APN, User, Password, Number)
- Bluetooth (enable/disable, set-up/monitor PAN connections, scan for peers)
- GSM (Provider selection)
- Bluetooth (signal strength)
- GPRS (display transfer rate, activate GPRS router)
- Battery (show capacity, voltage, charger-status)
Comment on GSM Support
- As there are no gsmd python bindings available at the time, SettingGUI uses python-subprocess and threads to communicate to the commandline of libgsmd-tool for the time being.
- To prevent interference with the GSM modem you have to expicitly power-up and register the modem by toggeling the "GSM State" checkboxes.
- If you manually register to the gsm network (by toggeling the "Register" checkbox) SettingsGUI will sometimes not notice when the connection is established. Just toggle the init checkbox after about 3 seconds. (this seems to be due to a bug in gsmd...)
|NOTE: From Version 0.7 the atcmd mode of libgsmd-tool is used. To use it revision 2957 (2007-09-12) or later of gsmd is needed. If you have an older version of gsmd - or an older Openmoko image - use the upgrade function of ipkg, install a newer jffs2 image or use version 0.6 of SettingsGUI.|
- When the GPRS connection is still active (pppd running on the system) you should close the connection as gsmd can't start up while pppd is using the modem connection - chose "Yes" in the dialog:
Comment on GPRS Support
If you have problems connecting check:
- If the modem is initialized and registered to a network (Start gsmd and register)
- If your login data (mostly APN and User are okay)
- When the gsmd still running you should close the connection as gsmd will interfere with pppd - chose "Yes" in the dialog:
The connection will be terminated when you quit the application. However saved peer configurations can be called independently using:
pppd debug call gprs # where gprs is the peer
Default configuration files are defined in GlobalConfiguration.py. The peer configuration, a connect- and disconnect chat script are written to /etc/ppp/peers/ on first startup if you don't already have a peer in /etc/ppp/peers/. When the connect button is pressed SettingsGUI will create latest_* files in /etc/ppp/peers/ and start the pppd with this latest_* peer.
SettingsGUI also brings a default Nameserver in case you don't have a valid /etc/resolve.conf. The IP is from the OpenDNS Project and will only work if your GPRS provider allows DNS access to this server.
If you have to change anything else than APN, user, password or dial in number for your provider please leave a note at the Discussion Page.
For details and background information on GPRS see Manually using GPRS.
Comment on Bluetooth Support
With SettingsGUI you can only connect using PAN. Due to display real estate problems Version 0.8 does not support HID pairing yet.
The IP address for your PAN connection will be generated from a configurable mask (see GlobalConfiguration.py) and the last byte of the Bluetooth Address (think of MAC address). Default IP is 10.0.0.x.
For details and background information on Bluetooth see Manually using Bluetooth.
|Version||Download||Release Focus||Release Date|
|0.8 (current)||settingsgui-0.8.tar.bz2||bluetooth settings, reorganized package structure ("settingsgui" python package included, startscript is named "settings" now)||2008-03-16|
|0.7b||settingsgui-0.7b.tar.bz2||bugfix on GSM page, bug prevented detection of gsmd connection (emerged with libgsmd-tool update)||2007-10-02|
|0.7||settingsgui-0.7.tar.bz2||cleanups, using AT mode, distutils, ATDT -> ATD||2007-09-21|
|0.6||SettingsGUI-0.6.tar.gz||audio settings (mute, save), gprs settings (all new)||2007-09-06|
Access the current SVN version at: http://neo1973-germany.de/svn/SettingsGUI/
The Package is now buildable by bitbake. Download the latest .ipk from: http://downloads.openmoko.org/repository/
Thanks to Alessandro there still is the inofficial .ipk and a .bb file. Have a look at his user site.
- For more, see Python.
The following archives will have to be installed (source packages: python python-pygtk python-pycairo python-pygobject):
- python-threading (should be a dependency of python-subprocess - todo: fix)
- python-pygobject (should be a dependency of python-pygtk - todo: fix)
If you want to test this and do not have a build environment, you can 'ipkg install' the python components from the ScaredyCat Users Repositories.
|NOTE: These packages take up a considerable amout of space (about 10 MByte), make sure that you have enough free space or install the packages to the media card as explained in package management.|
Installation / Execution
FSO and ASU Users
Use the latest Version from SVN for now.
svn co http://neo1973-germany.de/svn/SettingsGUI/trunk SettingsGUI-svn
The following addidional packages have to be installed:
opkg install alsa-utils-amixer opkg install bluez-utils # opkg install gsmd # opkg install gsmd-tools
GPRS / GSM Panel
You may not want to use those with FSO/ASU! - It WILL break the phone applications (no calls / sms)!
SettingsGUI is not yet supporting the new framework-stack, so you'll have to use gsmd for GSM/GPRS. Therefore you would have to install the packages and stop the gsmget daemon already running. Once you've installed gsmd it may start on every system boot, which may then prevent any other GSM daemon from starting. This may break your phone applications until you fix the problem again.
Get GPRS working anyway
1) Stop gsmget
2) Connect to your mobile carrier using the GSM Panel
3) Connect to GPRS (answer "yes" when asked to kill the GSM daemon)
- add Alessandros repository as a ipkg source
src/gz aiurlano-armv4t http://aiurlano.netsons.org/Openmoko/ipk/armv4t src/gz aiurlano-all http://aiurlano.netsons.org/Openmoko/ipk/all
- update your db
- install latest settingsgui
ipkg install settingsgui
- download file to Neo (e.g. using wget)
- Uncompress tar.bz2 file (e.g. e.g. tar -xjvf file.tar.bz2)
cd settingsgui-x.x mv settingsgui settingsgui.py mkdir settingsgui mv * settingsgui mv settingsgui/settingsgui.py ./
export DISPLAY=:0.0 python settingsgui.py &
Comment on Installation
From Version 0.7 Python distutils is used. So you could also use the setup.py script to install the package:
python settingsgui-x.x/setup.py install
For Version 0.8beta (I didn't test for 0.7), don't change any names, just unpack and then:
cd settingsgui-x.x python setup.py install
But to do this you'll also have to install the packages:
python-compile python-devel python-stringold python-distutils