SettingsGUI

From Openmoko

Revision as of 17:28, 22 August 2007 by Kriss (Talk | contribs)

Jump to: navigation, search
In progress: This article or section documents one or more features whose implementation are in progress.
File:SettingsGUI-Backlight.png
SettingsGUI Backlight Settings

Contents

Overview

Until OpenMoko releases an official GUI-Tool to change settings, SettingsGUI allows you to set various settings of the gta01.

This programm is written in Python using pygtk python-dbus. It can be used only if those are present in your environment.

(see SettingsGUI#Environment)

Current Features

  • Screen (Backlight enable/disable, Backlight brightness, Screen Orientation)
  • Audio (profile selection)

Planned Features

  • Audio (volume)
  • GSM (Provider selection, enable/disable gsm-reciver, signal strenght)
  • Bluetooth (device scanning, connection, signal strength)
  • GPRS (select APN, display transfer rate)
  • Battery (show capacity, voltage, charger-status)

Download

SettingsGUI-0.2b.tar.gz

Environment

The following archives will have to be installed:

  • python-core (or python)
  • python-misc (optional)
  • python-pygtk
  • python-pygtk-dev
  • python-pycairo-dev (should be a dependency of python-pygtk-dev...?)


Installation / Execution

  • Uncompress tar.gz file
  • run:
python SettingsGUI-x.x/SettingsGUI.py
Personal tools
In progress: This article or section documents one or more features whose implementation are in progress.
File:SettingsGUI-Backlight.png
SettingsGUI Backlight Settings

Overview

Until OpenMoko releases an official GUI-Tool to change settings, SettingsGUI allows you to set various settings of the gta01.

This programm is written in Python using pygtk python-dbus. It can be used only if those are present in your environment.

(see SettingsGUI#Environment)

Current Features

  • Screen (Backlight enable/disable, Backlight brightness, Screen Orientation)
  • Audio (profile selection)

Planned Features

  • Audio (volume)
  • GSM (Provider selection, enable/disable gsm-reciver, signal strenght)
  • Bluetooth (device scanning, connection, signal strength)
  • GPRS (select APN, display transfer rate)
  • Battery (show capacity, voltage, charger-status)

Download

SettingsGUI-0.2b.tar.gz

Environment

The following archives will have to be installed:

  • python-core (or python)
  • python-misc (optional)
  • python-pygtk
  • python-pygtk-dev
  • python-pycairo-dev (should be a dependency of python-pygtk-dev...?)


Installation / Execution

  • Uncompress tar.gz file
  • run:
python SettingsGUI-x.x/SettingsGUI.py