Setting Date and Time
Linux systems (such as the FreeRunner) prefer that the system clock be set to universal time (UTC). Then, you will need to configure the timezone to display the time adjusted to local time.
See Timezone for instructions on changing the time zone.
For more information on Linux timekeeping, see Linux, Clocks, and Time. (But ignore mentions of /etc/sysconfig/clock. That doesn't apply to the Openmoko environment.)
Setting the date/time using "date"
To change the date on your FreeRunner, issue one of the following commands:
date -s MMDDhhmm date -s MMDDhhmmYYYY date -s MMDDhhmmYYYY.ss
where MM is the month, 01-12; DD is the day, 01-31; hhmm is the time, 0000-2359; YYYY is the optional year, and .ss is the optional seconds.
Setting date/time from your linux box
ssh root@openmoko "date -u -s `date -u +%m%d%H%M%Y.%S`"
Setting date/time with a python GUI
Tested on Neo1973 (OM2007.2), the 'time-man' tool is at
Setting your local timezone
To have your FreeRunner display time appropriate to your local timezone, update the /etc/localtime symlink to point to the file in /usr/share/zoneinfo that represents your timezone. For example, in an SSH session to the phone, or in a terminal running on the phone:
# ls -l /etc/localtime lrwxrwxrwx 1 root root 27 Jul 10 23:05 /etc/localtime -> /usr/share/zoneinfo/PST8PDT # ln -s /usr/share/zoneinfo/CST6CDT /etc/localtime
(Based on this post on the support mailing list)
You may want to try this if the above returns something like "file exists".
# ln -sf /usr/share/zoneinfo/CST6CDT /etc/localtime
the -f (--force) removes existing destination files. (CQ).
Setting the date/time automatically with NTP
If your FreeRunner is connected to the internet, you can instead set the time automatically:
opkg install ntpclient ntpclient -s -h pool.ntp.org
If your FreeRunner is connecting to the internet through a USB host, make sure you allow UDP traffic to pass through on port 123 (NTP) on your host machine or you may get a "no route to host" error from ntpclient.
Syncing the hardware clock
No matter which method you used above, sync the hardware clock with the system time to make your change persist over reboots:
Note: if you run the ASU image, hwclock will not work. Instead you can use:
echo "W\n" > /var/spool/at/trigger
Here is a link from the community mailing list for using hwclock with the ASU image
Setting the date/time automatically with gps
GPS Sight has a button to sync the hardware clock to the gps clock.
First you have to make sure gps works on you neo. You can do that by following the steps in the Getting_Started_with_your_Neo_FreeRunner#Use_the_GPS.
The second step is to install GPS Sight:
# opkg install http://projects.openmoko.org/frs/download.php/227/gpssight_0.8.4_freerunner.armv4t.ipk
The last step is the actual syncing of the clock. For this, simply run the GPS Sight program from the main menu, wait for it to find the gps time and click the button labeled "Sync clock".
Presumably it might also be possible to use gpspipe (or something else) to set the date once you have a gps fix automatically? In addition, the phone stack should set the date, time, and timezone once connected to a network.