Using FSO/SHR Makefile
- Download the FSO/SHR Makefile from Bearstech (see README for details):
$ wget http://shr.bearstech.com/Makefile
$ make setup
make setup will download FSO, bitbake and SHR in the shr directory (SHR root directory from now on).
Set up your local.conf
Before building the image, you might want to update shr-unstable/conf/local.conf (buildhost uses shr-testing!) to tweak your build.
Speed up the building process
If your machine has multiple CPU's (or dual-core) this will help:
PARALLEL_MAKE = "-j 4" BB_NUMBER_THREADS = "4"
Disable/Minimize locales generation
To avoid multiple locales generation, add:
GLIBC_GENERATE_LOCALES = "en_US.UTF-8"
or to disable locale generation at all:
ENABLE_BINARY_LOCALE_GENERATION = "0"
this will also speed up the whole build.
You are now ready to build the SHR image:
$ cd shr-unstable $ make image
By default, this will build the image for OM-GTA02. If you want to build the image for OM-GTA01:
$ cd shr-unstable $ make setup-machine-om-gta01 $ make image
you can change it back to OM-GTA02 with make setup-machine-om-gta02.
Make changes to an SHR project (e.g. openmoko-dialer3, under the SHR root directory), then under the top directory:
$ cd shr-unstable $ . setup-env (only once per session) $ bitbake -c clean openmoko-dialer3 $ bitbake -c build openmoko-dialer3
There is no need to check-in the changes to the SHR repo, because the system now looks for SHR packages in the local filesystem. The problem is that it is necessary to always clean the packages so bitbake gets the new changes next time you compile.
Also, note that we are using bitbake -c build, this is because bitbake needs to do all the necessary steps before compiling (i.e. fetch, unpack, configure...).
When you are satisfied with your changes and want to create a new SHR image:
$ make image
Updating from other people's changes
Under the top directory:
$ make update-shr
Or under the SHR root directory:
$ svn update
If you want to update everything (FSO, bitbake and SHR), from the top directory:
$ make update
One thing to try is to unset all environment variables not listed in this page. LIBPATH and INCLUDE can be particularly troublesome.
If you get the error '/proc/sys/vm/mmap_min_addr is not 0', try
$ echo 0 | sudo tee /proc/sys/vm/mmap_min_addr