New way (using FSO/SHR Makefile)
There is a new (much simpler) way to build SHR that is under construction right now.
- Download the FSO/SHR Makefile and common directory from Bearstech (see README for details). In the future, the necessary files will be automatically downloaded by the Makefile, by now, you can use this simple script to download all files (including the Makefile. wget is required, edit it to fulfill your needs), type:
$ . get-shr.sh
- Change this line in common/setup-env:
Set up your local.conf
Before building the image, you might want to update conf/local.conf (under shr-unstable in the top directory) to speed up the building process with:
PARALLEL_MAKE = "-j 4" BB_NUMBER_THREADS = "4"
To avoid multiple locales generation, add:
GLIBC_GENERATE_LOCALES = "en_US.UTF-8"
this will also speed up the whole build.
- You are now ready to build the SHR image:
$ make setup $ cd shr-unstable $ make image
make setup will download FSO, bitbake and SHR in the shr directory (SHR root directory from now on).
By default, this will build the image for OM-GTA02. If you want to build the image for OM-GTA01:
$ cd shr-unstable $ make setup-machine-om-gta01
you can change it back to OM-GTA02 with make setup-machine-om-gta02.
Make changes to an SHR project (e.g. openmoko-dialer3, under the SHR root directory), then under the top directory:
$ cd shr-unstable $ . setup-env (only once per session) $ bitbake -c clean openmoko-dialer3 $ bitbake -c build openmoko-dialer3
There is no need to check-in the changes to the repo as the system now looks for SHR packages in the local filesystem. The problem is that it is necessary to always clean the packages so bitbake gets the new changes next time you compile.
Also, note that we are using bitbake -c build, this is because bitbake needs to do all the necessary steps before compiling (i.e. fetch, unpack, configure...).
When you are satisfied with your changes and want to create a new SHR image:
$ make image
Updating from other people's changes
Under the top directory:
$ make update-shr
Or under the SHR root directory:
$ svn update
If you want to update everything (FSO, bitbake and SHR), from the top directory:
$ make update
Currently this is the only package of any size being developed for SHR, and it's the only one with any instructions. If you start another SHR project (please check with Bobby before starting one), put instructions for working on the project here!
You must build openembedded before you can build SHR packages. The easiest way is to go to http://wiki.openmoko.org/wiki/Mokomakefile and build using the instructions for FSO.
* Note: if building FSO fails using MokoMakefile (zhone! or no dbus show up on the top of the newly booted image), try using this method: http://wiki.openmoko.org/wiki/FSO
The rest of these instructions are written assuming that you used Mokomakefile and that the directory you downloaded the base Makefile into (using wget) is $MOKO.
You must also download the SHR code using subversion. See http://projects.openmoko.org/projects/shr. We will refer to the directory to which you downloaded the project as $SHRSVN. (This directory should contain $SHRSVN/packages/openmoko-dialer3.bb)
Set up your BBPATH
Set up the CACHE
Set up your local.conf
Edit $MOKO/build/conf/local.conf and append the following lines:
BBFILES += "$SHRSVN/trunk/packages/*.bb $MOKO/openembedded/packages/*/*.bb" SELECTED_OPTIMIZATION = "-Os -g"
Note: Spaces are important in your bitbake conf files! You must have spaces before & after the = or +=
(Environment variables, $SHRSVN and $MOKO, can not be used inside local.conf, so absolute paths must be used instead)
Set up your openmoko.conf (if using 2007.2)
and make sure that these Gtk+ options are set:
# Select package versions we want to use. PREFERRED_PROVIDER_gtk+ = "gtk+-fastscaling" PREFERRED_VERSION_gtk+-fastscaling = "2.10.14"
Add your cross-compiler to your PATH
(Don't forget to source the setup-env file in the shell before running bitbake)
After the first time you build successfully, you can build with
bitbake -b openmoko-dialog3_svn
which is much faster.
To recompile, and only recompile
bitbake -c compile -b $SHRSVN/trunk/packages/openmoko-dialer3.bb
One thing to try is to unset all environment variables not listed in this page. LIBPATH and INCLUDE can be particularly troublesome.