S3c2410 boot usb

From Openmoko

Revision as of 13:00, 13 July 2008 by Glenn (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Outdated warning ! This article or section is significantly outdated, either by significant hardware or software changes. Procedures mentioned in this page may well not work for current hardware/software.


General

A small linux program for downlading executable code (such as boot-loader) into QT2410 RAM.

This only works with the QT2410 development board, since it has the corresponding receiver program in NOR flash.

Source code

Sources can be found at [1].


Usage

s3c2410_boot_usb usage is quite straight forward:

s3c2410_boot_usb <path_to_executable> <load_address>
Personal tools
Outdated warning ! This article or section is significantly outdated, either by significant hardware or software changes. Procedures mentioned in this page may well not work for current hardware/software.


General

A small linux program for downlading executable code (such as boot-loader) into QT2410 RAM.

This only works with the QT2410 development board, since it has the corresponding receiver program in NOR flash.

Source code

Sources can be found at [1].


Usage

s3c2410_boot_usb usage is quite straight forward:

s3c2410_boot_usb <path_to_executable> <load_address>