Qtopia on Neo1973

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Where to get it: Tip where to place alsactl in initscript)
Line 18: Line 18:
 
Do not switch themes.  Only the default theme is usable.  For example, once you switch themes, the lock feature continues to work, but only if you unlock using the smallest # keypad in the world.
 
Do not switch themes.  Only the default theme is usable.  For example, once you switch themes, the lock feature continues to work, but only if you unlock using the smallest # keypad in the world.
  
Suspend support is very flaky.  The neo often shuts off from a suspend state.  It will not wake from suspend for an incoming call or text message (someone try setting an alarm and report results here).  Unfortunately, Qtopia requires that the Neo be put into suspend mode after a maximum of 5 minutes.
+
Suspend support is very flaky.  The neo often shuts off from a suspend state.  It will not wake from suspend for an incoming call or text message (someone try setting an alarm and report results here).  To turn suspend off (this will of course use the batteries very quickly), hit the down arrow next to the suspend setting in the power management until it says "Off".
  
In summary, Qtopia on the Neo1973 is much closer to being ready than OpenMoko as of this writing.  However, sound and suspend support prevent it from being at all useful as a phone.
+
In summary, Qtopia on the Neo1973 is much closer to being ready than OpenMoko as of this writing.  However, sound and suspend support prevent it from being at all useful as a cell phone (as a landline that doesn't ring but instead vibrates, it works ok).
  
 
== Screenshots ==
 
== Screenshots ==

Revision as of 18:00, 19 September 2007

Where to get it

You can get everything you need from here. Currently the flash tarball has the 2.6.21 openmoko kernel and a Qtopia phone edition jffs2 flash image cross-compiled for the Neo.

It appears you must clear the flash chunks first (if you have not updated your uboot. If you have, you may skip this step). Get into uboot console [1] and enter

# nand erase kernel
# nand erase rootfs

Download and use dfu-util as normal [2] and the ip address and cidr are the same as the openmoko build (192.168.0.202/24) :D - Simple, Eh?


Most things seem to work out of the box, however you may need to use the following command to get audio:

# alsactl -f /etc/alsa/gsmhandset.state restore
Or put this command in /etc/init.d/qpe line 64

Do not switch themes. Only the default theme is usable. For example, once you switch themes, the lock feature continues to work, but only if you unlock using the smallest # keypad in the world.

Suspend support is very flaky. The neo often shuts off from a suspend state. It will not wake from suspend for an incoming call or text message (someone try setting an alarm and report results here). To turn suspend off (this will of course use the batteries very quickly), hit the down arrow next to the suspend setting in the power management until it says "Off".

In summary, Qtopia on the Neo1973 is much closer to being ready than OpenMoko as of this writing. However, sound and suspend support prevent it from being at all useful as a cell phone (as a landline that doesn't ring but instead vibrates, it works ok).

Screenshots

Here are some screenshots of Qtopia runing on a Neo 1973. Personally I find it very impressive...

Qtopia001.png

Qtopia002.png

Qtopia003.png

Qtopia004.png

Qtopia005.png

Qtopia006.png

Videos

http://www.youtube.com/watch?v=YW5q8SpY7t4
http://www.youtube.com/watch?v=iOG_mtSEMgs

For full size videos, 346 MiB:

http://linuxtracker.org/download.php?id=4613&name=qt_on_neo1973_videos.torrent
Personal tools

Where to get it

You can get everything you need from here. Currently the flash tarball has the 2.6.21 openmoko kernel and a Qtopia phone edition jffs2 flash image cross-compiled for the Neo.

It appears you must clear the flash chunks first (if you have not updated your uboot. If you have, you may skip this step). Get into uboot console [1] and enter

# nand erase kernel
# nand erase rootfs

Download and use dfu-util as normal [2] and the ip address and cidr are the same as the openmoko build (192.168.0.202/24) :D - Simple, Eh?


Most things seem to work out of the box, however you may need to use the following command to get audio:

# alsactl -f /etc/alsa/gsmhandset.state restore
Or put this command in /etc/init.d/qpe line 64

Do not switch themes. Only the default theme is usable. For example, once you switch themes, the lock feature continues to work, but only if you unlock using the smallest # keypad in the world.

Suspend support is very flaky. The neo often shuts off from a suspend state. It will not wake from suspend for an incoming call or text message (someone try setting an alarm and report results here). Unfortunately, Qtopia requires that the Neo be put into suspend mode after a maximum of 5 minutes.

In summary, Qtopia on the Neo1973 is much closer to being ready than OpenMoko as of this writing. However, sound and suspend support prevent it from being at all useful as a phone.

Screenshots

Here are some screenshots of Qtopia runing on a Neo 1973. Personally I find it very impressive...

Qtopia001.png

Qtopia002.png

Qtopia003.png

Qtopia004.png

Qtopia005.png

Qtopia006.png

Videos

http://www.youtube.com/watch?v=YW5q8SpY7t4
http://www.youtube.com/watch?v=iOG_mtSEMgs

For full size videos, 346 MiB:

http://linuxtracker.org/download.php?id=4613&name=qt_on_neo1973_videos.torrent