QtMoko

From Openmoko

Revision as of 16:36, 30 April 2010 by Marko Knöbl (Talk | contribs)

Jump to: navigation, search

QtMoko is a Debian based distribution for the Neo FreeRunner. The phone and user interface are based on Qt Extended Improved formerly known as Qtopia. The QtMoko wiki can be found here.

Contents

Download

Download the following files from radekp download to you desktop computer:

Installation

If you flash the FreeRunner with a kernel image from QtMoko, then you must install the kernel and the root file system. If you have Qi installed then you can install QtMoko on the SD card. This seems to be useful if you want to work with different distribution and you can change the distribution just by changing the Mirco SD card in your FreeRunner.

Switch off your FreeRunner and press the AUX and Power-On button at the same time. Your FreeRunner is showing the following U-Boot Menu:

  *** BOOT MENU (NOR) ***
  Boot
  Boot from Mirco SD (FAT/ext2)
  Set Console to USB
  Set Console to Serial
  Reboot
  Power Off  

The FreeRunner will stay in this mode for only 30 sec. Within this time you have to start dfu-util. If you want to flash the kernel image (you will need to be root on your PC) then you have to start the following command in the 30sec your see the BOOT MENU:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a kernel -R -D  uImage-v13.bin

and finally the root fs with this one:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a rootfs -R -D qtmoko-debian-v13.jffs2

First Boot

After finishing the installation without errors you have to start the FreeRunner and calibrate the touch screen. The you see the installed QtMoko on your device.

QtMoko after first boot

Login

If you want to login to your FreeRunner set up a network connection (see USB Networking) with USB cable and start:

  desktop# ssh -X -l root 192.168.0.202

The root password is empty so set it for security reason especially when you open the ssh-daemon on the WLAN network interface. Define root password as usual on a linux box with

  neo# passwd

If you have established the internet connection via USB cable then update the repository data:

  neo# apt-get update 

If you want to check if the internet connection is available on your freerunner ping the OpenMoko web server with:

  neo# ping 88.198.93.221
  neo# ping wiki.openmoko.org

If the first ping works and the second doesn't then check the DNS server settings (see USB Networking).

Setting Time and Date

Set the time and date on from your linux box with

ssh root@openmoko "date -us @`date -u +%s`"

If you want to set the time with a NTP Client install the following package, if you have a network connection available (see USB Networking)

# apt-get install ntpdate
# ntpdate-debian

For further detail see Setting Date and Time.

Personal tools

QtMoko is a Debian based distribution for the Neo FreeRunner. The phone and user interface are based on Qt Extended Improved formerly known as Qtopia. The QtMoko wiki can be found here.

Download

Download the following files from radekp download to you desktop computer:

Installation

If you flash the FreeRunner with a kernel image from QtMoko, then you must install the kernel and the root file system. If you have Qi installed then you can install QtMoko on the SD card. This seems to be useful if you want to work with different distribution and you can change the distribution just by changing the Mirco SD card in your FreeRunner.

Switch off your FreeRunner and press the AUX and Power-On button at the same time. Your FreeRunner is showing the following U-Boot Menu:

  *** BOOT MENU (NOR) ***
  Boot
  Boot from Mirco SD (FAT/ext2)
  Set Console to USB
  Set Console to Serial
  Reboot
  Power Off  

The FreeRunner will stay in this mode for only 30 sec. Within this time you have to start dfu-util. If you want to flash the kernel image (you will need to be root on your PC) then you have to start the following command in the 30sec your see the BOOT MENU:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a kernel -R -D  uImage-v13.bin

and finally the root fs with this one:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a rootfs -R -D qtmoko-debian-v13.jffs2

First Boot

After finishing the installation without errors you have to start the FreeRunner and calibrate the touch screen. The you see the installed QtMoko on your device.

QtMoko after first boot

Login

If you want to login to your FreeRunner set up a network connection (see USB Networking) with USB cable and start:

  desktop# ssh -X -l root 192.168.0.202

The root password is empty so set it for security reason especially when you open the ssh-daemon on the WLAN network interface. Define root password as usual on a linux box with

  neo# passwd

If you have established the internet connection via USB cable then update the repository data:

  neo# apt-get update 

If you want to check if the internet connection is available on your freerunner ping the OpenMoko web server with:

  neo# ping 88.198.93.221
  neo# ping wiki.openmoko.org

If the first ping works and the second doesn't then check the DNS server settings (see USB Networking).

Setting Time and Date

Set the time and date on from your linux box with

ssh root@openmoko "date -us @`date -u +%s`"

If you want to set the time with a NTP Client install the following package, if you have a network connection available (see USB Networking)

# apt-get install ntpdate
# ntpdate-debian

For further detail see Setting Date and Time.