QtMoko

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (Download Maps)
m (Download Maps)
Line 166: Line 166:
 
  </mapset>
 
  </mapset>
 
</pre>
 
</pre>
Both MAPSET and MAP have to be enabled (<tt> enabled="yes"</tt>) to work with the OSM-map in [[Navit]].
+
{{Note|Both MAPSET and MAP have to be enabled (<tt> enabled="yes"</tt>) to work with the OSM-map in [[Navit]].}}
  
 
===== Starting Navit =====
 
===== Starting Navit =====

Revision as of 12:08, 19 November 2010

QtMoko is a Debian based distribution for the Neo FreeRunner. The phone and user interface are based on Qt Extended Improved formerly known as Qtopia. The QtMoko wiki can be found here.

Contents

Download

Further information on QtMoko and the current state of development can be found on http://www.qtmoko.org.

Sourceforge Download

Download the following files from radekp download to you desktop computer:

OpenMobile.nl Download

This downloadable QtMoko-Image does not need the installation procedure of the following sections:

  • OpenMobile Installer is a zip-file that contains images.
  • The installation processes flashes Qi and other images
  • you have to create to partitions 1=FAT 2=SWAP on your SD-Card (e.g. 2GB SD, Partition 1: FAT16, Partition 2: 128MB as swap - fdisk type 82)
  • download qtm-installer-v26.zip and unpack the file on the FAT-partition of your Mirco-SD card.
  • Insert Mirco-SD in your freerunner and boot from SD-Card (press Power & AUX-Button together to get boot menue)
  • Select boot from Mirco-SD and after 3 automatic reboots and flashing the QtMoko is installed including Navit.

Installation

If you flash the FreeRunner with a kernel image from QtMoko, then you must install the kernel and the root file system with dfu-util.

NOTE: You need a fully charged Freerunner for installation.



Installation on SD card with Qi

Installing QtMoko on your microSD Card depends on the Bootloader you are using, uBoot or Qi.

If you have Qi installed then you can install QtMoko on the SD card. This seems to be useful if you want to work with different distribution and you can change the distribution just by changing the Mirco SD card in your FreeRunner.

NOTE: Installation in NAND-Memory with Qi is possible without errors, but with an installed bootloader Qi the boot process will terminate (with Qi installed by Android, which is modified). Install a non-Android Qi version or u-Boot instead!


If you use Qi, you only need an ext2 partition into your µSD Card where you uncompress the root filesystem image file qtmoko-debian-v26.tar.gz. In this case Qi Bootloader is going to look for the kernel image into the /boot directory for file named uImage-GTA02.bin .

Installation in NAND Memory with u-Boot

If you have Qi or Android (with a modified Qi) installed on your Freerunner then install u-boot again as a bootloader by downloading a u-boot-binary on http://downloads.openmoko.org/distro/unstable/daily/ otherwise the boot process will terminate and you have to install u-Boot.

All versions of the GTA02 (Neo FreeRunner) that have been sold to the public are version 5 hardware, so look for a file with "gta02" and "v5" in the name, for example: u-boot-gta02v5-1.3.1.bin (linked U-Boot-Version from 31.Jan 2010):

 sudo dfu-util -a u-boot -R -D u-boot-gta02v5-1.3.1.bin

Installation of Kernel and Root-FS NAND-Memory

Switch off your FreeRunner and press the AUX and Power-On button at the same time. Your FreeRunner is showing the following U-Boot Menu:

  *** BOOT MENU (NOR) ***
  Boot
  Boot from Mirco SD (FAT/ext2)
  Set Console to USB
  Set Console to Serial
  Reboot
  Power Off  

The FreeRunner will stay in this mode for only 30 sec. Within this time you have to start dfu-util. If you want to flash the kernel image (you will need to be root on your PC) then you have to start the following command in the 30sec your see the BOOT MENU (use kernel and rootfs from http://sourceforge.net/projects/qtmoko/files/):

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a kernel -R -D  uImage-v24.bin

and finally the root fs with this one:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a rootfs -R -D qtmoko-debian-v24.jffs2

Preparations on the Connected PC/Laptop

  • To enable connections just by using the hostname openmoko edit the /etc/hosts and add line
 192.168.0.202   openmoko
  • Enable internet connection via USB Networking so that the installation of packages will be possible.

First Boot

After finishing the installation without errors you have to start the FreeRunner and calibrate the touch screen. Then you see the installed QtMoko on your device.

QtMoko after first boot

First Login

If you want to login to your FreeRunner set up a network connection (see USB Networking) with USB cable and start:

  desktop# ssh -X -l root 192.168.0.202

The root password is empty so set it for security reason especially when you open the ssh-daemon on the WLAN network interface. Define root password as usual on a linux box with

  neo# passwd

If you have established the internet connection via USB cable then update the repository data:

  neo# apt-get update 

If you want to check if the internet connection is available on your freerunner ping the OpenMoko web server with:

  neo# ping 88.198.93.221
  neo# ping wiki.openmoko.org

If the first ping works and the second doesn't then check the DNS server settings (see USB Networking).

Setting Time and Date

Set the time and date on from your linux box with

ssh root@openmoko "date -us @`date -u +%s`"

sync the hardware clock with the system time to make your change persist over reboots:

# hwclock --systohc  
   DOES NOT WORK - no access to Hardware Clock

If you want to set the time with a NTP Client install the following package, if you have a network connection available (see USB Networking)

# apt-get install ntpdate
# ntpdate-debian

For further detail see Setting Date and Time.

Usage

Size Root File System

If you want to install e.g. Twinkle and Navit on QtMoko the size of internal NAND memory is not sufficient (Twinkle need > 100MB). By creating symbolic links some memory problems can be avoided.

NOTE: (Size Root Filesystem) Create symbolic links from root file system to SD-card to save internal memory.If some folders are symb-linked to SD-Card (with e.g. ext2 partition), e.g.
 # mkdir /media/card/share
 # mkdir /media/card/share/navit
 # ln -s /media/card/share/navit /usr/share/navit 

It recommended to use an ext2-partition. After creating symb-links install software.


Consider installing QtMoko on MircroSD instead with Qi, if you want to make use of debian applications that exceed NAND memory capacity.

Login

If you want to login to your FreeRunner set up a network connection (see USB Networking) with USB cable and start:

  desktop# ssh -X -l root 192.168.0.202

or if hostname is defined in /etc/hosts

  desktop# ssh -X -l root openmoko

Installation of Applications

If you want to install applications (e.g. myapplication) login on your freerunner

 # apt-get install myapplication

Replace myapplication by the package name of application name you want to start, e.g. if you want to install the command line editor vim.

 # apt-get install vim

Navit

Navit Installation

If you want to install e.g. the application Navit, you have to install the following packages. Navit needs and X-Server and it will run under QX.

 # apt-get install flite
 # apt-get install unzip

The zip-package is necessary to unzip the navit-qtm.zip package.

 # cd /media/card
 # mkdir download
 # cd download
 # wget http://www.openmobile.nl/media/download_gallery/navit-qtm.zip
 # cd /

During unzip you will be asked to replace /opt/qtmoko/bin/ppp-network. This has to be done to solve problems with DNS over GPRS. Backup ppp-network file before unzipping navit-qtm.zip.

 # cp /opt/qtmoko/bin/ppp-network /opt/qtmoko/bin/ppp-network.bak
 # unzip /media/card/download/navit-qtm.zip
 # rm /media/card/download/navit-qtm.zip

Unzipping the file will overwrite the following files too:

 /opt/qtmoko/etc/qx/favourites.conf
 /opt/qtmoko/etc/qx/profiles.conf
NOTE: Unzip extracts and overwrites the network settings files mentioned above. Due to this fact the usb0 MAC address changes for the USB connection to your freerunner. E.g. under Ubuntu 10.04 the new network interface for usb0 has to configure again


Now you have to restart your Freerunner, but you can also try from the commandline of your neo:

 # echo 1 > /proc/sys/vm/overcommit_memory

After restart you can start Navit under QX.

Navit in QX Main Menu
Download Maps

Create a folder MapsNavit on your SD card

 # mkdir /media/card/MapsNavit

The navit QT package navit-qtm.zip from http://www.openmobile.nl the navit.xml is predefined for benelux maps and will try to load osm_benelux.bin that should be store at

 /media/card/MapsNavit/osm_benelux.bin

If you want to use map for another country you can just store a downloaded Navit-Map in that folder and rename it osm_benelux.bin. If the map name should make sense, then you have to edit the navit.xml. See Navit-manual for details. You can find the navit.xml at:

 # /usr/share/navit/navit.xml

Create the folder .navit in the home directory on your FR and copy navit.xml to directory:

 # cd ~
 # mkdir .navit
 # cp /usr/share/navit/navit.xml .navit/navit.xml 

If you have the editor vim installed then edit the file at line 376 approx.:

 # vim ~/.navit/navit.xml

If you have downloaded the file germany.bin your mapset-tags should look like this:

 <!-- Mapset template for openstreetmaps -->
 <mapset enabled="yes">
   <map type="binfile" enabled="yes" data="/media/card/MapsNavit/germany.bin"/>
 </mapset>
NOTE: {{{1}}}


Starting Navit
Launch Navit in QX
  • Open Main Menu by clicking on the green Q-Topia "Q"-Box.
  • Open Applications (4 Boxes, red, yellow, green, blue)
  • Scroll down and open QX
  • Select Navit
  • Click on the white Paper Icon on the bottom left to open the context menu of the QX application.
  • Select Launch to start Navit.
  • Exit with AUX-Button without stopping navit

VoIP

Integrated VoIP-Client

QtMoko has an integrated VoIP-Client, which would be perfect to use a SIP-Account to do free of charge mobile communication world wide. But at the moment the integrated VoIP-Client does not work, due to some strange problems in Version v24 (see QtMoko-Wiki for current status of development).

Android on Freerunner has an integrated SIP-Client SipDroid that has strange audio problems as well (see http://sipdroid.org ). Maybe there is an underlying problem the

have in common.

Twinkle/Linphone

See Twinkle for further details or the official Website http://www.twinklephone.com/

  apt-get install twinkle

For installation of Twinkle your need 105MB. It would be necessary to install QtMoko on MircoSD.

NOTE: (Error) Installation of Twinkle with apt-get stops with errors- 20.11.2010


You can use Linphone instead, which will use 83MB.

  apt-get install linphone

PIM Storage and Import

As visible on QtMoko-Wiki Syncing Calendar data is not working at the moment. Some work has be done (Thanks to mossroy), so that iCal-Files (ics) can be imported to your QtMoko calendar via a perlscript ics2qtcal.pl. Choose the current version from http://mossroy.free.fr/ics2qtcal/.

  1. install the dependencis for the perl script (see install_dependencies.sh)
  2. Export the calendar in an iCal File (e.g. mycalendar.ics) and transfer this file to your Neo.
  3. import mycalendar.ics with scripts into your SQLite Database.

Links

Personal tools

QtMoko is a Debian based distribution for the Neo FreeRunner. The phone and user interface are based on Qt Extended Improved formerly known as Qtopia. The QtMoko wiki can be found here.

Download

Further information on QtMoko and the current state of development can be found on http://www.qtmoko.org.

Sourceforge Download

Download the following files from radekp download to you desktop computer:

OpenMobile.nl Download

This downloadable QtMoko-Image does not need the installation procedure of the following sections:

  • OpenMobile Installer is a zip-file that contains images.
  • The installation processes flashes Qi and other images
  • you have to create to partitions 1=FAT 2=SWAP on your SD-Card (e.g. 2GB SD, Partition 1: FAT16, Partition 2: 128MB as swap - fdisk type 82)
  • download qtm-installer-v26.zip and unpack the file on the FAT-partition of your Mirco-SD card.
  • Insert Mirco-SD in your freerunner and boot from SD-Card (press Power & AUX-Button together to get boot menue)
  • Select boot from Mirco-SD and after 3 automatic reboots and flashing the QtMoko is installed including Navit.

Installation

If you flash the FreeRunner with a kernel image from QtMoko, then you must install the kernel and the root file system with dfu-util.

NOTE: You need a fully charged Freerunner for installation.



Installation on SD card with Qi

Installing QtMoko on your microSD Card depends on the Bootloader you are using, uBoot or Qi.

If you have Qi installed then you can install QtMoko on the SD card. This seems to be useful if you want to work with different distribution and you can change the distribution just by changing the Mirco SD card in your FreeRunner.

NOTE: Installation in NAND-Memory with Qi is possible without errors, but with an installed bootloader Qi the boot process will terminate (with Qi installed by Android, which is modified). Install a non-Android Qi version or u-Boot instead!


If you use Qi, you only need an ext2 partition into your µSD Card where you uncompress the root filesystem image file qtmoko-debian-v26.tar.gz. In this case Qi Bootloader is going to look for the kernel image into the /boot directory for file named uImage-GTA02.bin .

Installation in NAND Memory with u-Boot

If you have Qi or Android (with a modified Qi) installed on your Freerunner then install u-boot again as a bootloader by downloading a u-boot-binary on http://downloads.openmoko.org/distro/unstable/daily/ otherwise the boot process will terminate and you have to install u-Boot.

All versions of the GTA02 (Neo FreeRunner) that have been sold to the public are version 5 hardware, so look for a file with "gta02" and "v5" in the name, for example: u-boot-gta02v5-1.3.1.bin (linked U-Boot-Version from 31.Jan 2010):

 sudo dfu-util -a u-boot -R -D u-boot-gta02v5-1.3.1.bin

Installation of Kernel and Root-FS NAND-Memory

Switch off your FreeRunner and press the AUX and Power-On button at the same time. Your FreeRunner is showing the following U-Boot Menu:

  *** BOOT MENU (NOR) ***
  Boot
  Boot from Mirco SD (FAT/ext2)
  Set Console to USB
  Set Console to Serial
  Reboot
  Power Off  

The FreeRunner will stay in this mode for only 30 sec. Within this time you have to start dfu-util. If you want to flash the kernel image (you will need to be root on your PC) then you have to start the following command in the 30sec your see the BOOT MENU (use kernel and rootfs from http://sourceforge.net/projects/qtmoko/files/):

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a kernel -R -D  uImage-v24.bin

and finally the root fs with this one:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a rootfs -R -D qtmoko-debian-v24.jffs2

Preparations on the Connected PC/Laptop

  • To enable connections just by using the hostname openmoko edit the /etc/hosts and add line
 192.168.0.202   openmoko
  • Enable internet connection via USB Networking so that the installation of packages will be possible.

First Boot

After finishing the installation without errors you have to start the FreeRunner and calibrate the touch screen. Then you see the installed QtMoko on your device.

QtMoko after first boot

First Login

If you want to login to your FreeRunner set up a network connection (see USB Networking) with USB cable and start:

  desktop# ssh -X -l root 192.168.0.202

The root password is empty so set it for security reason especially when you open the ssh-daemon on the WLAN network interface. Define root password as usual on a linux box with

  neo# passwd

If you have established the internet connection via USB cable then update the repository data:

  neo# apt-get update 

If you want to check if the internet connection is available on your freerunner ping the OpenMoko web server with:

  neo# ping 88.198.93.221
  neo# ping wiki.openmoko.org

If the first ping works and the second doesn't then check the DNS server settings (see USB Networking).

Setting Time and Date

Set the time and date on from your linux box with

ssh root@openmoko "date -us @`date -u +%s`"

sync the hardware clock with the system time to make your change persist over reboots:

# hwclock --systohc  
   DOES NOT WORK - no access to Hardware Clock

If you want to set the time with a NTP Client install the following package, if you have a network connection available (see USB Networking)

# apt-get install ntpdate
# ntpdate-debian

For further detail see Setting Date and Time.

Usage

Size Root File System

If you want to install e.g. Twinkle and Navit on QtMoko the size of internal NAND memory is not sufficient (Twinkle need > 100MB). By creating symbolic links some memory problems can be avoided.

NOTE: (Size Root Filesystem) Create symbolic links from root file system to SD-card to save internal memory.If some folders are symb-linked to SD-Card (with e.g. ext2 partition), e.g.
 # mkdir /media/card/share
 # mkdir /media/card/share/navit
 # ln -s /media/card/share/navit /usr/share/navit 

It recommended to use an ext2-partition. After creating symb-links install software.


Consider installing QtMoko on MircroSD instead with Qi, if you want to make use of debian applications that exceed NAND memory capacity.

Login

If you want to login to your FreeRunner set up a network connection (see USB Networking) with USB cable and start:

  desktop# ssh -X -l root 192.168.0.202

or if hostname is defined in /etc/hosts

  desktop# ssh -X -l root openmoko

Installation of Applications

If you want to install applications (e.g. myapplication) login on your freerunner

 # apt-get install myapplication

Replace myapplication by the package name of application name you want to start, e.g. if you want to install the command line editor vim.

 # apt-get install vim

Navit

Navit Installation

If you want to install e.g. the application Navit, you have to install the following packages. Navit needs and X-Server and it will run under QX.

 # apt-get install flite
 # apt-get install unzip

The zip-package is necessary to unzip the navit-qtm.zip package.

 # cd /media/card
 # mkdir download
 # cd download
 # wget http://www.openmobile.nl/media/download_gallery/navit-qtm.zip
 # cd /

During unzip you will be asked to replace /opt/qtmoko/bin/ppp-network. This has to be done to solve problems with DNS over GPRS. Backup ppp-network file before unzipping navit-qtm.zip.

 # cp /opt/qtmoko/bin/ppp-network /opt/qtmoko/bin/ppp-network.bak
 # unzip /media/card/download/navit-qtm.zip
 # rm /media/card/download/navit-qtm.zip

Unzipping the file will overwrite the following files too:

 /opt/qtmoko/etc/qx/favourites.conf
 /opt/qtmoko/etc/qx/profiles.conf
NOTE: Unzip extracts and overwrites the network settings files mentioned above. Due to this fact the usb0 MAC address changes for the USB connection to your freerunner. E.g. under Ubuntu 10.04 the new network interface for usb0 has to configure again


Now you have to restart your Freerunner, but you can also try from the commandline of your neo:

 # echo 1 > /proc/sys/vm/overcommit_memory

After restart you can start Navit under QX.

Navit in QX Main Menu
Download Maps

Create a folder MapsNavit on your SD card

 # mkdir /media/card/MapsNavit

The navit QT package navit-qtm.zip from http://www.openmobile.nl the navit.xml is predefined for benelux maps and will try to load osm_benelux.bin that should be store at

 /media/card/MapsNavit/osm_benelux.bin

If you want to use map for another country you can just store a downloaded Navit-Map in that folder and rename it osm_benelux.bin. If the map name should make sense, then you have to edit the navit.xml. See Navit-manual for details. You can find the navit.xml at:

 # /usr/share/navit/navit.xml

Create the folder .navit in the home directory on your FR and copy navit.xml to directory:

 # cd ~
 # mkdir .navit
 # cp /usr/share/navit/navit.xml .navit/navit.xml 

If you have the editor vim installed then edit the file at line 376 approx.:

 # vim ~/.navit/navit.xml

If you have downloaded the file germany.bin your mapset-tags should look like this:

 <!-- Mapset template for openstreetmaps -->
 <mapset enabled="yes">
   <map type="binfile" enabled="yes" data="/media/card/MapsNavit/germany.bin"/>
 </mapset>

Both MAPSET and MAP have to be enabled ( enabled="yes") to work with the OSM-map in Navit.

Starting Navit
Launch Navit in QX
  • Open Main Menu by clicking on the green Q-Topia "Q"-Box.
  • Open Applications (4 Boxes, red, yellow, green, blue)
  • Scroll down and open QX
  • Select Navit
  • Click on the white Paper Icon on the bottom left to open the context menu of the QX application.
  • Select Launch to start Navit.
  • Exit with AUX-Button without stopping navit

VoIP

Integrated VoIP-Client

QtMoko has an integrated VoIP-Client, which would be perfect to use a SIP-Account to do free of charge mobile communication world wide. But at the moment the integrated VoIP-Client does not work, due to some strange problems in Version v24 (see QtMoko-Wiki for current status of development).

Android on Freerunner has an integrated SIP-Client SipDroid that has strange audio problems as well (see http://sipdroid.org ). Maybe there is an underlying problem the

have in common.

Twinkle/Linphone

See Twinkle for further details or the official Website http://www.twinklephone.com/

  apt-get install twinkle

For installation of Twinkle your need 105MB. It would be necessary to install QtMoko on MircoSD.

NOTE: (Error) Installation of Twinkle with apt-get stops with errors- 20.11.2010


You can use Linphone instead, which will use 83MB.

  apt-get install linphone

PIM Storage and Import

As visible on QtMoko-Wiki Syncing Calendar data is not working at the moment. Some work has be done (Thanks to mossroy), so that iCal-Files (ics) can be imported to your QtMoko calendar via a perlscript ics2qtcal.pl. Choose the current version from http://mossroy.free.fr/ics2qtcal/.

  1. install the dependencis for the perl script (see install_dependencies.sh)
  2. Export the calendar in an iCal File (e.g. mycalendar.ics) and transfer this file to your Neo.
  3. import mycalendar.ics with scripts into your SQLite Database.

Links