under Qt Extended.
You can start applications that need the X-Server with the following steps in QtMoko:
- Open Main Menu by clicking on the green Q-Topia "Q"-Box.
- Open Applications (4 Boxes, red, yellow, green, blue)
- Scroll down and open QX
- Select the application that needs the X-Server (e.g. Navit)
- Click on the white Paper Icon on the bottom left to open the context menu of the QX application.
- Select "Launch" to start application
With the AUX-Button you can exit the X-Server environment without quitting the application.
QX is the X-Server in QtMoko you can add favorites to the QX-Menu too by manual editing the files in:
detemines the list of application you will see after starting QX. The file looks like this:
[Apps] list=navit, tangogps
The applicationsnames must exist and need an entry in the profiles.conf file. The file
defines the QX-settings for the application. E.g. navit needs the GPS-daemon to be started and the auto-dim function of the display is disabled. These settings can be defined for the applications individually. The file contain profile records like the following for tangogps and navit:
[tangogps] antidim=true antisuspend=true gps=true init=gpsd /dev/ttySAC1 kbd=false qvga=false rotate=false wm=true [navit] antidim=true antisuspend=true gps=true init=gpsd /dev/ttySAC1 kbd=false qvga=false rotate=false wm=true
Add to QX-Favourites
You have installed or programmed an application with the name myapp. Test the application in the QX-terminal if it works properly. Now we add this application myapp to the application list in favourites.conf. We do this e.g. with vi:
# vi /opt/qtmoko/etc/qx/favourites.conf
The file look like this (press "I" for switching to INSERT mode):
[Apps] list=navit, tangogps, myapp
add lines press ESC and :w for "write to file" and ":q" for "quit VI". Now we have to add a profile record for myapp in file profiles.conf. We do this e.g. with vi:
# vi /opt/qtmoko/etc/qx/profiles.conf
The file is depended on your settings could look like this and e.g. the following lines (press "I" for switching to INSERT mode):
[myapp] antidim=false antisuspend=true gps=false init= kbd=false qvga=false rotate=false wm=false
Then press "ESC" and ":w" for "write to file" and ":q" for "quit VI".
You just have to remove the application name from the list of applications in:
You do not need to remove the application profile for your application in profiles.conf.