Prototypes

From Openmoko

Revision as of 12:54, 29 January 2008 by Wolfgang.spraul (Talk | contribs)

Jump to: navigation, search

Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.

This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.

Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.

If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.

Contents

#12 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#11 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#10 GTA02 A5

current holder: Willie
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#9 GTA02 A5

current holder: Matt
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#8 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#7 GTA02 A5

current holder: Tony (may be fixed in future)
29 Jan 2008 Miles: receiver test failed (receiver broken)
29 Jan 2008 Same as #1

#6 Highcell battery 3.7V 1250mAh with Coulomb counter

current holder: Tony
29 Jan 2008 Willie: verified

#5 Highcell battery 3.7V 1250mAh with Coulomb counter

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Willie: verified

#4 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Werner
29 Jan 2008 sent to Werner
29 Jan 2008 Willie: verified

#3 GTA02 A5

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1

#2 GTA02 A5

current holder: Harald
29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1

#1 GTA02 A5

current holder: Werner
29 Jan 2008 sent to Werner
29 Jan 2008 Miles: verified hardware, except for

  • microSD
  • suspend/resume
  • Bluetooth audio
  • Coulomb counter & motion sensor only low-level verification (no drivers)
  • USB host only low-level verification (no device)
  • charging (only 500mA verified), running on USB only, switching between charging modes
  • full memory verification
  • wakeup interrupts (WiFi, USB, GSM, motion sensors, 2 buttons, RTC, headphone jack)

28 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
28 Jan 2008 Tony: Rework wifi FW to 2.0.0.40
28 Jan 2008 Arrived from Suzhou (batch of 10) as PCBA with all modules (wifi FW 1.3), full DM1 (v009) and DM2 (v012)

Personal tools

Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.

This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.

Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.

If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.

#12 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#11 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#10 GTA02 A5

current holder: Willie
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#9 GTA02 A5

current holder: Matt
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#8 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#7 GTA02 A5

current holder: Tony (may be fixed in future)
29 Jan 2008 Miles: receiver test failed (receiver broken)
29 Jan 2008 Same as #1

#6 Highcell battery 3.7V 1250mAh with Coulomb counter

current holder: Tony
29 Jan 2008 Willie: verified

#5 Highcell battery 3.7V 1250mAh with Coulomb counter

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Willie: verified

#4 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Werner
29 Jan 2008 sent to Werner
29 Jan 2008 Willie: verified

#3 GTA02 A5

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1

#2 GTA02 A5

current holder: Harald
29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1

#1 GTA02 A5

current holder: Werner
29 Jan 2008 sent to Werner
29 Jan 2008 Miles: verified hardware, except for

  • microSD
  • suspend/resume
  • Bluetooth audio
  • Coulomb counter & motion sensor only low-level verification (no drivers)
  • USB host only low-level verification (no device)
  • charging (only 500mA verified), running on USB only, switching between charging modes
  • full memory verification
  • wakeup interrupts (WiFi, USB, GSM, motion sensors, 2 buttons, RTC, headphone jack)

28 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
28 Jan 2008 Tony: Rework wifi FW to 2.0.0.40
28 Jan 2008 Arrived from Suzhou (batch of 10) as PCBA with all modules (wifi FW 1.3), full DM1 (v009) and DM2 (v012)